Yamaha Dvx 1000 Owners Manual
Here you can view all the pages of manual Yamaha Dvx 1000 Owners Manual. The Yamaha manuals for Home Theater System are available online for free. You can easily download all the documents as PDF.
Page 221
Pro Tools Remote Layer221 DM1000 Version 2—Owner’s Manual Remote Control 17 EINSERT ASSIGN/EDIT section This section enables you to insert plug-ins into Pro Tools channels and adjust plug-in settings. Use the left and right [ ]/[ ] Tab Scroll buttons to change the parameters displayed in this section. •ASSIGN......................... Turn on this button to insert plug-ins into Pro Tools channels. (If you are using the TDM system, you can also assign outboard effects processors.)...
Page 222
222Chapter 17—Remote Control DM1000 Version 2—Owner’s Manual ■Meter Display mode ( [F4] button) Press the [F4] button to select this display mode, in which the level meters for tracks 1–16 are displayed. •Channels 1–16.............. The channel 1–16 levels or Send levels are displayed. Control Surface Operation When the Pro Tools Remote Layer is selected, the DM1000 controls on the top panel engage the following functions: ■Channel Strip section •Encoders Encoders adjust the panpots or Aux Send levels....
Page 223
Pro Tools Remote Layer223 DM1000 Version 2—Owner’s Manual Remote Control 17 ■AUX SELECT Section •[AUX 1]–[AUX 5] buttons These buttons select Sends A–E so that you can adjust the corresponding Pro Tools channel send level. •[AUX 6] button Press and hold down this button and press the desired [SEL] button to reset the correspond- ing channel fader level. Press and hold down this button and press the desired Encoder push-switch to reset the cor- responding channel panpot to center. While you are holding...
Page 224
224Chapter 17—Remote Control DM1000 Version 2—Owner’s Manual ■SELECTED CHANNEL Section •ROUTING [1] button Selects the previous track to be controlled by the Joystick. •ROUTING [2] button Selects the next track to be controlled by the Joystick. •ROUTING [3] button Functions the same as the [OPTION] key on a computer keyboard. •ROUTING [4] button Switches between L and R of the selected track. The [4] button indicator lights up when the R channel is selected. •ROUTING [5] button Selects Main, or Send (in...
Page 225
Pro Tools Remote Layer225 DM1000 Version 2—Owner’s Manual Remote Control 17 ■USER DEFINED KEYS section •[1]–[12] buttons You can assign one of 164 parameters to each of these buttons. In particular, if you assign any of 53 Remote Control parameters to these buttons, you can operate the transport sec- tion and select various Pro Tools modes from the DM1000 top panel. See page 274 for more information on assigning the parameters to the buttons. Parameter Function DAW RECPlaces Pro Tools in Record...
Page 226
226Chapter 17—Remote Control DM1000 Version 2—Owner’s Manual DAW MONI STATUSPressing the key (to which this function is assigned) enables you to view the current monitoring mode and the channel strip type. DAW CREATE GROUPPressing the key (to which this function is assigned) enables you to execute the function specified in the menu of the Pro Tools Group list. DAW SUSPEND GROUPSuspends all mix groups temporarily. Press the button again to undo suspen- sion. DAW WIN TRANSPORT Shows or hides the Transport...
Page 227
Pro Tools Remote Layer227 DM1000 Version 2—Owner’s Manual Remote Control 17 Selecting Channels To select a single Pro Tools channel, press the [SEL] button that corresponds to the desired channel. To select multiple Pro Tools channels simultaneously, while holding down one [SEL] but- ton, press the [SEL] buttons of the other channels you wish to add. Press the [SEL] buttons again to cancel the selection. Setting Channel Levels 1Make sure that the FADER MODE [FADER] indicator is lit steadily. If the...
Page 228
228Chapter 17—Remote Control DM1000 Version 2—Owner’s Manual Configuring Sends A–E as Pre or Post You can set Pro Tools channels for the selected Sends (A–E) to pre or post. 1Press the AUX SELECT [AUX 1]–[AUX 5] buttons to select the desired Sends (A–E). The selected button indicators light up. Send pre/post status can be viewed in Channel Dis- play or Meter Display mode by pressing and holding down the [AUX1]–[AUX5] buttons. 2Press the Encoder push-switches for the desired channels. Pressing the...
Page 229
Pro Tools Remote Layer229 DM1000 Version 2—Owner’s Manual Remote Control 17 3Use the faders, Encoders, and [ON] buttons to control the currently-selected send. For stereo Aux input channels, you can set the left and right panpots individually. To do this, press the ENCODER MODE [PAN] button repeatedly. When the button indicator is lit continuously, you can set the left panpot. When the button indicator is flashing, you can set the right panpot. Assigning Plug-ins to Pro Tools Channels You can assign...
Page 230
230Chapter 17—Remote Control DM1000 Version 2—Owner’s Manual 7Press [ENTER] to confirm the assignment. Repeat Steps 6 and 7 to assign more plug-ins to other insert positions in the channel strip. 8In the same way, assign plug-ins to other channels. 9When you finish assigning plug-ins, press the [AUX 8] button. The button indicator turns off. Editing Plug-ins You can edit plug-ins inserted in the channel strips as follows: 1Press the [F2] button to select Insert Display mode. 2Press the corresponding [SEL]...