Yamaha Dvx 1000 Owners Manual
Here you can view all the pages of manual Yamaha Dvx 1000 Owners Manual. The Yamaha manuals for Home Theater System are available online for free. You can easily download all the documents as PDF.
Page 191
Recording an Automix191 DM1000 Version 2—Owner’s Manual Automix 16 •PA N................................ Pan operation •SURR............................. Surround pan operation •AU X................................ Aux Send level operation •AUX ON........................ Aux Send on/off operation •EQ................................... EQ operation Recording the First Event Follow the steps below to select channels and start Automix recording. 1Move the cursor to the REC button at the bottom of the page,...
Page 192
![Page 192
192Chapter 16—Automix
DM1000 Version 2—Owner’s Manual
5Adjust the faders, Encoders, [ON] buttons, and other controls of the channels
selected in Step 3.
6To record EQ events, use the SELECTED CHANNEL section to edit the EQ set-
tings of the currently-selected channel.
To select other channels, press the [AUTO] button to turn off the [AUTO] button indicator,
then use the [SEL] buttons to select channels.
7To stop Automix recording, stop the timecode source, or move the cursor
to the STOP button on the...](http://img.usermanuals.tech/thumb/83/53499/w300_yamaha_dvx-1000-owner-s-manual-191.png "Page 192
192Chapter 16—Automix
DM1000 Version 2—Owner’s Manual
5Adjust the faders, Encoders, [ON] buttons, and other controls of the channels
selected in Step 3.
6To record EQ events, use the SELECTED CHANNEL section to edit the EQ set-
tings of the currently-selected channel.
To select other channels, press the [AUTO] button to turn off the [AUTO] button indicator,
then use the [SEL] buttons to select channels.
7To stop Automix recording, stop the timecode source, or move the cursor
to the STOP button on the...")
192Chapter 16—Automix DM1000 Version 2—Owner’s Manual 5Adjust the faders, Encoders, [ON] buttons, and other controls of the channels selected in Step 3. 6To record EQ events, use the SELECTED CHANNEL section to edit the EQ set- tings of the currently-selected channel. To select other channels, press the [AUTO] button to turn off the [AUTO] button indicator, then use the [SEL] buttons to select channels. 7To stop Automix recording, stop the timecode source, or move the cursor to the STOP button on the...
Page 193
![Page 193
Inserting Mix Parameters into Automix193
DM1000 Version 2—Owner’s Manual
Automix
16
Inserting Mix Parameters into Automix
You can insert the static mix parameter settings into the range specified by the IN and OUT
parameters in the current Automix data. This is useful when you want to quickly insert
static EQ settings into a specified range of the Automix data.
1After you create a new Automix following the steps in the “Creating a New
Automix” (page 190), press the DISPLAY ACCESS [SETUP] button...](http://img.usermanuals.tech/thumb/83/53499/w300_yamaha_dvx-1000-owner-s-manual-192.png "Page 193
Inserting Mix Parameters into Automix193
DM1000 Version 2—Owner’s Manual
Automix
16
Inserting Mix Parameters into Automix
You can insert the static mix parameter settings into the range specified by the IN and OUT
parameters in the current Automix data. This is useful when you want to quickly insert
static EQ settings into a specified range of the Automix data.
1After you create a new Automix following the steps in the “Creating a New
Automix” (page 190), press the DISPLAY ACCESS [SETUP] button...")
Inserting Mix Parameters into Automix193 DM1000 Version 2—Owner’s Manual Automix 16 Inserting Mix Parameters into Automix You can insert the static mix parameter settings into the range specified by the IN and OUT parameters in the current Automix data. This is useful when you want to quickly insert static EQ settings into a specified range of the Automix data. 1After you create a new Automix following the steps in the “Creating a New Automix” (page 190), press the DISPLAY ACCESS [SETUP] button...
Page 194
![Page 194
194Chapter 16—Automix
DM1000 Version 2—Owner’s Manual
3Press the DISPLAY ACCESS [REMOTE] button repeatedly until the Remote |
Machine page appears.
4Assign the Insert In and Out Locate points to the Locate memories specified
in the LOCATE/TIME section (page 244) and selected in Step 2.
5Press the DISPLAY ACCESS [AUTOMIX] button repeatedly until the Automix
| Main page appears.
6Use the cursor buttons to select the INSERT button, then press [ENTER].
A confirmation message appears.
The default IN and OUT...](http://img.usermanuals.tech/thumb/83/53499/w300_yamaha_dvx-1000-owner-s-manual-193.png "Page 194
194Chapter 16—Automix
DM1000 Version 2—Owner’s Manual
3Press the DISPLAY ACCESS [REMOTE] button repeatedly until the Remote |
Machine page appears.
4Assign the Insert In and Out Locate points to the Locate memories specified
in the LOCATE/TIME section (page 244) and selected in Step 2.
5Press the DISPLAY ACCESS [AUTOMIX] button repeatedly until the Automix
| Main page appears.
6Use the cursor buttons to select the INSERT button, then press [ENTER].
A confirmation message appears.
The default IN and OUT...")
194Chapter 16—Automix DM1000 Version 2—Owner’s Manual 3Press the DISPLAY ACCESS [REMOTE] button repeatedly until the Remote | Machine page appears. 4Assign the Insert In and Out Locate points to the Locate memories specified in the LOCATE/TIME section (page 244) and selected in Step 2. 5Press the DISPLAY ACCESS [AUTOMIX] button repeatedly until the Automix | Main page appears. 6Use the cursor buttons to select the INSERT button, then press [ENTER]. A confirmation message appears. The default IN and OUT...
Page 195
![Page 195
Inserting Mix Parameters into Automix195
DM1000 Version 2—Owner’s Manual
Automix
16
7Use the cursor buttons to select YES, then press [ENTER].
The DM1000 enters Insert mode, and the INSERT button is highlighted.
The fader positions, mute function and other parameters are updated to the settings speci-
fied for the time value of the IN parameter.
8Select the parameter you wish to insert using the buttons in the OVERWRITE
section.
To select effect or plug-in parameters, locate the Effect | Edit or P-in...](http://img.usermanuals.tech/thumb/83/53499/w300_yamaha_dvx-1000-owner-s-manual-194.png "Page 195
Inserting Mix Parameters into Automix195
DM1000 Version 2—Owner’s Manual
Automix
16
7Use the cursor buttons to select YES, then press [ENTER].
The DM1000 enters Insert mode, and the INSERT button is highlighted.
The fader positions, mute function and other parameters are updated to the settings speci-
fied for the time value of the IN parameter.
8Select the parameter you wish to insert using the buttons in the OVERWRITE
section.
To select effect or plug-in parameters, locate the Effect | Edit or P-in...")
Inserting Mix Parameters into Automix195 DM1000 Version 2—Owner’s Manual Automix 16 7Use the cursor buttons to select YES, then press [ENTER]. The DM1000 enters Insert mode, and the INSERT button is highlighted. The fader positions, mute function and other parameters are updated to the settings speci- fied for the time value of the IN parameter. 8Select the parameter you wish to insert using the buttons in the OVERWRITE section. To select effect or plug-in parameters, locate the Effect | Edit or P-in...
Page 196
196Chapter 16—Automix DM1000 Version 2—Owner’s Manual Parameter Recording The following table summarizes the parameter recording operation for each parameter available in Automix recording. Parameters Channel OVERWRITE Operation Pair/Group Channel Levels (faders)Input FADERSet Layer to Input, Fader mode to Fader, use faders Faders of paired channels and grouped faders are recorded together. Bus Out, Aux SendSet Layer to Master, Fader mode to Fader, use faders Stereo Out Use Stereo Out fader Group...
Page 197
![Page 197
Punching In & Out197
DM1000 Version 2—Owner’s Manual
Automix
16
Punching In & Out
You can modify part of a recorded Automix or add events to an Automix (Punch In & Out).
You can punch in and out channels using the [SEL] buttons, or individual parameters using
other controls.
Punch In & Out Using the [SEL] Buttons
Follow the steps below to punch channels in and out using the [SEL] buttons.
1Select parameters you wish to record in the OVERWRITE section.
2Move the cursor to the REC or AUTO REC button at...](http://img.usermanuals.tech/thumb/83/53499/w300_yamaha_dvx-1000-owner-s-manual-196.png "Page 197
Punching In & Out197
DM1000 Version 2—Owner’s Manual
Automix
16
Punching In & Out
You can modify part of a recorded Automix or add events to an Automix (Punch In & Out).
You can punch in and out channels using the [SEL] buttons, or individual parameters using
other controls.
Punch In & Out Using the [SEL] Buttons
Follow the steps below to punch channels in and out using the [SEL] buttons.
1Select parameters you wish to record in the OVERWRITE section.
2Move the cursor to the REC or AUTO REC button at...")
Punching In & Out197 DM1000 Version 2—Owner’s Manual Automix 16 Punching In & Out You can modify part of a recorded Automix or add events to an Automix (Punch In & Out). You can punch in and out channels using the [SEL] buttons, or individual parameters using other controls. Punch In & Out Using the [SEL] Buttons Follow the steps below to punch channels in and out using the [SEL] buttons. 1Select parameters you wish to record in the OVERWRITE section. 2Move the cursor to the REC or AUTO REC button at...
Page 198
198Chapter 16—Automix DM1000 Version 2—Owner’s Manual 5Perform the following operations to punch in and out individual events. 6Stop the Automix. A confirmation window regarding updating the Automix data appears. Parameters Channel OVERWRITE Operation Punch In Punch Out Channel Levels (faders)Input FADERSet Layer to Iinput, Fader mode to Fader Touch fader knob and adjust 1 1. To punch in events by performing this operation, set TOUCH SENSE to TOUCH or LATCH on the Fader1 or 2 page.Release fader knob 2...
Page 199
![Page 199
[SEL] Button Functions While the [AUTO] Button Indicator Is On199
DM1000 Version 2—Owner’s Manual
Automix
16
[SEL] Button Functions While the [AUTO] Button
Indicator Is On
While the [AUTO] button indicator is lit, you can use the channel [SEL] buttons to turn the
Automix function on and off, arm or disarm channels, or punch channels in and out.
The [SEL] button indicators operate as follows:
•Off.................................. Automix recording or playback disabled....](http://img.usermanuals.tech/thumb/83/53499/w300_yamaha_dvx-1000-owner-s-manual-198.png "Page 199
[SEL] Button Functions While the [AUTO] Button Indicator Is On199
DM1000 Version 2—Owner’s Manual
Automix
16
[SEL] Button Functions While the [AUTO] Button
Indicator Is On
While the [AUTO] button indicator is lit, you can use the channel [SEL] buttons to turn the
Automix function on and off, arm or disarm channels, or punch channels in and out.
The [SEL] button indicators operate as follows:
•Off.................................. Automix recording or playback disabled....")
[SEL] Button Functions While the [AUTO] Button Indicator Is On199 DM1000 Version 2—Owner’s Manual Automix 16 [SEL] Button Functions While the [AUTO] Button Indicator Is On While the [AUTO] button indicator is lit, you can use the channel [SEL] buttons to turn the Automix function on and off, arm or disarm channels, or punch channels in and out. The [SEL] button indicators operate as follows: •Off.................................. Automix recording or playback disabled....
Page 200
![Page 200
200Chapter 16—Automix
DM1000 Version 2—Owner’s Manual
Automix Main Page
This section explains the Automix Main page. This page enables you to set the basic Auto-
mix parameters and record and play back Automixes. To locate the Automix | Main page,
press the DISPLAY ACCESS [AUTOMIX] button repeatedly until the page appears.
AFREE
The amount of free Automix memory remaining is displayed here in kilobytes, as a per-
centage, and by a bar graph.
BSIZE
The size of the current Automix and the size of any...](http://img.usermanuals.tech/thumb/83/53499/w300_yamaha_dvx-1000-owner-s-manual-199.png "Page 200
200Chapter 16—Automix
DM1000 Version 2—Owner’s Manual
Automix Main Page
This section explains the Automix Main page. This page enables you to set the basic Auto-
mix parameters and record and play back Automixes. To locate the Automix | Main page,
press the DISPLAY ACCESS [AUTOMIX] button repeatedly until the page appears.
AFREE
The amount of free Automix memory remaining is displayed here in kilobytes, as a per-
centage, and by a bar graph.
BSIZE
The size of the current Automix and the size of any...")
200Chapter 16—Automix DM1000 Version 2—Owner’s Manual Automix Main Page This section explains the Automix Main page. This page enables you to set the basic Auto- mix parameters and record and play back Automixes. To locate the Automix | Main page, press the DISPLAY ACCESS [AUTOMIX] button repeatedly until the page appears. AFREE The amount of free Automix memory remaining is displayed here in kilobytes, as a per- centage, and by a bar graph. BSIZE The size of the current Automix and the size of any...