Home > Yamaha > Home Theater System > Yamaha Dvx 1000 Owners Manual

Yamaha Dvx 1000 Owners Manual

Here you can view all the pages of manual Yamaha Dvx 1000 Owners Manual. The Yamaha manuals for Home Theater System are available online for free. You can easily download all the documents as PDF.

Page 151

Using Fader Group Master151
DM1000 Version 2—Owner’s Manual
Grouping Channels & Linking Parameters
12
4Use the cursor buttons to select parameters, then use the Parameter wheel, 
INC/DEC buttons, or [ENTER] button to set the parameters.
•INPUT/OUTPUT FADER MASTER.... When this check box is checked, you can set the 
master levels for the Fader groups. The result-
ant Channel level equals the corresponding 
Channel fader level plus the Group Master 
level.
•ALL NOMINAL............ This button resets the...

Page 152

152Chapter 12—Grouping Channels & Linking Parameters
DM1000 Version 2—Owner’s Manual
Using Mute Group Master
In addition to the Mute Group function that links the operation of channel [ON] buttons, 
the DM1000 features a Mute Group Master function that enables you to mute grouped 
channels using the Master Mute buttons in a manner similar to using a mute group on an 
analog mixing console. While this function is enabled, the [ON] buttons for grouped chan-
nels will not be linked.
1After you perform Step...

Page 153

Linking EQ and Compressor Parameters153
DM1000 Version 2—Owner’s Manual
Grouping Channels & Linking Parameters
12
-Out EQ page
This page enables you to set EQ links (e–h) for Bus Outs (1–8) and Aux Outs (1–8).
-In Comp page
This page enables you to set Compressor links (i–l) for Input Channels.
-Out Comp page
This page enables you to set Compressor links (m–p) for Bus Outs (1–8) and Aux Outs 
(1–8).
 

Page 154

154Chapter 12—Grouping Channels & Linking Parameters
DM1000 Version 2—Owner’s Manual
2Press the up ( ) or down ( ) cursor button to select a link to which you want 
to add channels.
3Press the [SEL] button for a channel you wish to add to the EQ or Compressor 
link.
The selected channel is marked with “ ” and the channel is added to the link.
4In the same way, press the [SEL] button for other channels you wish to add 
to the link.
The EQ or compressor settings for the first channel added to the link are...

Page 155

Internal Effects155
DM1000 Version 2—Owner’s Manual
Internal Effects
13
13  Internal Effects
This chapter describes how to use the DM1000’s internal effects processors.
About the Internal Effects
The DM1000 features four internal multi-effects processors that can be used via Aux Sends 
or by inserting them into specific channels.
These effects processors offer numerous types of effects, including reverbs, delays, modu-
lation-based effects, combination effects, and multi-channel effects designed...

Page 156

156Chapter 13—Internal Effects
DM1000 Version 2—Owner’s Manual
Using Effects Processors via Aux Sends
You can use effects processors via Aux Sends by patching effects processor inputs to Aux 
Outs, and effects processor outputs to Input Channels.
1Recall an effect program you wish to use.
See page 177 for more information on recalling effect programs.
2Press the DISPLAY ACCESS [INPUT PATCH] button repeatedly until the In 
Patch | Effect page appears.
This page enables you to patch all inputs and outputs...

Page 157

Using Effects Processors via Aux Sends157
DM1000 Version 2—Owner’s Manual
Internal Effects
13
•FX1-1–FX4-2................ Other effects processor outputs
You cannot select outputs FX1–3 to FX1–8. In addition, you 
cannot select the output of the effects processor you are cur-
rently using.
To use the internal effects processors via Aux Sends, select Aux 1–8 (in most cases).
You can patch a different signal to the other input of 2-in/2-out effect programs.
4To patch a signal output from the effects...

Page 158

158Chapter 13—Internal Effects
DM1000 Version 2—Owner’s Manual
Inserting the Internal Effects into Channels
You can insert the internal effects into certain Input Channels or Output Channels (Bus 
Outs 1–8, Aux Outs 1–8, Stereo Out).
1Select an internal Effects processor (1–4), then recall the desired effect pro-
grams.
2Press the [SEL] button or move the fader of the Input Channel or Output 
Channel into which you want to insert the selected effects.
3Press the DISPLAY ACCESS [ /INSERT/DELAY] button...

Page 159

Editing Effects159
DM1000 Version 2—Owner’s Manual
Internal Effects
13
Editing Effects
To edit effect programs recalled to the internal Effects processors 1–4, press the DISPLAY 
ACCESS [EFFECT] button repeatedly until the Edit page for the effects processor you wish 
to edit appears.
Effects processors 1–4 correspond to the following pages:
•Effects Processor 1....... FX1 Edit page
•Effects Processor 2....... FX2 Edit page
•Effects Processor 3....... FX3 Edit page
•Effects Processor 4....... FX4 Edit...

Page 160

160Chapter 13—Internal Effects
DM1000 Version 2—Owner’s Manual
When you turn on the SYNC parameter, the DM1000 recalculates the delay time or 
modulation frequency based on the TEMPO parameter value (tempo) and the NOTE 
parameter value (note). For example, if the TEMPO parameter is set to 120BPM and the 
NOTE parameter is set to one eighth note, turning on the SYNC parameter sets the 
delay time to 250 msec and the modulation frequency to 0.25 Hz.
•TEMPO......................... This parameter control...
Start reading Yamaha Dvx 1000 Owners Manual

Related Manuals for Yamaha Dvx 1000 Owners Manual

All Yamaha manuals