Yamaha Dvx 1000 Owners Manual

Input Patching111
DM1000 Version 2—Owner’s Manual
9
Input & Output Patching
Using the Encoders for Input Patching
By default, you can also use the Encoders on the top panel to change the Input Patching.
1Press the ENCODER MODE [ASSIGN] button. The button indicator lights up.
By default, you can use the Encoders to change Input Patching while the [ASSIGN] button 
indicator is lit.
2Rotate the Encoder of the Input Channel for which you want to change 
patching. (Alternatively, press the corresponding...

112Chapter 9—Input & Output Patching
DM1000 Version 2—Owner’s Manual
Output Patching
The DM1000’s Stereo Out, Bus Out 1–8, Aux Out 1–8 signals can be patched to any outputs 
and slot channels.
Patch example:
By default, the following signal paths are patched to outputs and slot output channels:
You can change these patches, if you desire. The procedure for patching signals to output 
varies depending on the output connectors and slots.
Output connectors and slot 
channelsSignal flow
OMNI OUT connectors...

Output Patching113
DM1000 Version 2—Owner’s Manual
9
Input & Output Patching
Patching Omni Outs
You can route the DM1000’s internal signals to OMNI OUT 1–12.
1Press the DISPLAY ACCESS [OUTPUT PATCH] button repeatedly until the Out 
Patch | Omni Out page appears.
The OMNI 1–12 parameter boxes (
1) indicate the currently-patched signals. The param-
eter indicators are explained below:
2Move the cursor to a patch parameter you wish to change, and rotate the 
Parameter wheel or press the [INC]/[DEC] buttons...

114Chapter 9—Input & Output Patching
DM1000 Version 2—Owner’s Manual
Patching the 2TR Digital Outputs
You can route the DM1000’s internal signals to 2TR OUT DIGITAL connectors 1–2.
1Press the DISPLAY ACCESS [OUTPUT PATCH] button repeatedly until the Out 
Patch | 2TR Out page appears.
Signals assigned on the Omni Out page can also be assigned to the 2TR digital outputs.
2Move the cursor to a patch parameter you wish to change, and rotate the 
Parameter wheel or press the [INC]/[DEC] buttons to modify the...

Patching Direct Outs115
DM1000 Version 2—Owner’s Manual
9
Input & Output Patching
Patching Direct Outs
Input Channel 1–48 signals can be directly patched to any outputs or slot outputs, as well 
as Bus Out 1–8 and Stereo Out. This patching is convenient when you wish to record each 
Input Channel signal to an individual track on a connected recorder.
1Press the DISPLAY ACCESS [OUTPUT PATCH] button repeatedly until the Out 
Patch | Direct Out page appears.
The parameters on this page are described below....

116Chapter 9—Input & Output Patching
DM1000 Version 2—Owner’s Manual
Insert Patching
The DM1000’s Input Channels and Output Channels (Stereo Out, Bus Out 1–8, Aux Out 
1–8) feature independent Insert Ins and Outs. Inputs, outputs, slot channels, and internal 
effects processor inputs and outputs can be patched to the Output Channel Insert Ins and 
Outs. In this way, you can send the signals to external effects processors for processing, or 
insert internal effects.
Individual Insert Patching
You can...

Insert Patching117
DM1000 Version 2—Owner’s Manual
9
Input & Output Patching
BINSERT section
•ON/OFF......................... This button turns Insert on or off. 
•OUT............................... This parameter enables you to select outputs, slot channels, or 
internal effects inputs as the Insert Out destination.
•IN.................................... This parameter enables you to select inputs, slot channels, or 
internal effects outputs as the Insert In source.
CCOMP section...

118Chapter 9—Input & Output Patching
DM1000 Version 2—Owner’s Manual
Viewing and Changing Insert In Patch
You can view and also change the items patched to the Insert Ins of all Input Channels (or 
all Output Channels). This is useful when you wish to find out if multiple channels have the 
same patch.
1To view the Input Channels’ Insert Ins, press the [INPUT PATCH] button 
repeatedly until the In Patch | Insert In page appears.
This page displays Input Channels 1–48 Insert In Patches.
2Move the cursor to...

Control Room Monitoring119
DM1000 Version 2—Owner’s Manual
Control Room Monitoring
10
10  Control Room Monitoring
This chapter explains how to set up control room monitoring and use the Solo and Talkback 
functions on the DM1000.
Control Room Monitor
The DM1000 features the Control Room stereo signal path to feed the control room’s main 
monitors. By default, the Control Room signal source is patched to OMNI OUT connectors 
11 & 12, which can feed the Control Room signal to the control room’s monitor....

120Chapter 10—Control Room Monitoring
DM1000 Version 2—Owner’s Manual
Solo Setup
For solo setup, press the MONITOR [DISPLAY] button repeatedly until the Monitor | Solo 
page appears.
This page contains the following parameters:
ASOLO
This parameter turns the Solo function on or off. By default, it is set to Enabled.
BMODE
This parameter determines how the Solo function works. There are two options. The 
setting affects only Input Channels.
•RECORDING............... In Recording Solo mode, soloed Input...