Yamaha 2007 R6 Service

							SERVICE MANUAL
YZFR6V(C)
LIT-11616-19-78 2C0-28197-10 
						

							EAS20050
YZFR6V(C)
SERVICE MANUAL
©2005 by Yamaha Motor Corporation, U.S.A.
First edition, December 2005
All rights reserved.
Any reproduction or unauthorized use 
without the written permission of 
Yamaha Motor Corporation, U.S.A. 
is expressly prohibited.
Printed in U.S.A.
P/N LIT-11616-19-78 
						

							EAS20070
NOTICE
This manual was produced by the Yamaha Motor Company, Ltd. primarily for use by Yamaha dealers 
and their qualified mechanics. It is not possible to include all the knowledge of a mechanic in one man-
ual. Therefore, anyone who uses this book to perform maintenance and repairs on Yamaha vehicles 
should have a basic understanding of mechanics and the techniques to repair these types of vehicles. 
Repair and maintenance work attempted by anyone without this knowledge is likely to render the vehi-
cle unsafe and unfit for use.
This model has been designed and manufactured to perform within certain specifications in regard to 
performance and emissions. Proper service with the correct tools is necessary to ensure that the vehi-
cle will operate as designed. If there is any question about a service procedure, it is imperative that you 
contact a Yamaha dealer for any service information changes that apply to this model. This policy is 
intended to provide the customer with the most satisfaction from his vehicle and to conform to federal 
environmental quality objectives.
Yamaha Motor Company, Ltd. is continually striving to improve all of its models. Modifications and sig-
nificant changes in specifications or procedures will be forwarded to all authorized Yamaha dealers and 
will appear in future editions of this manual where applicable.
NOTE:
• This Service Manual contains information regarding periodic maintenance to the emission control sys-
tem. Please read this material carefully.
 Designs and specifications are subject to change without notice.
EAS20080
IMPORTANT MANUAL INFORMATION
Particularly important information is distinguished in this manual by the following.
The Safety Alert Symbol means ATTENTION! BECOME ALERT! YOUR 
SAFETY IS INVOLVED!
Failure to follow WARNING instructions could result in severe injury or death
 
to the vehicle operator, a bystander or a person checking or repairing the ve-
hicle.
A CAUTION indicates special precautions that must be taken to avoid dam-
age to the vehicle.
A NOTE provides key information to make procedures easier or clearer.
WARNING
CAUTION:
NOTE: 
						

							EAS20090
HOW TO USE THIS MANUAL
This manual is intended as a handy, easy-to-read reference book for the mechanic. Comprehensive 
explanations of all installation, removal, disassembly, assembly, repair and check procedures are laid 
out with the individual steps in sequential order.
The manual is divided into chapters and each chapter is divided into sections. The current section title 
“1” is shown at the top of each page.
Sub-section titles “2” appear in smaller print than the section title.
To help identify parts and clarify procedure steps, there are exploded diagrams “3” at the start of each 
removal and disassembly section.
Numbers “4” are given in the order of the jobs in the exploded diagram. A number indicates a disas-
sembly step.
Symbols “5” indicate parts to be lubricated or replaced.
Refer to “SYMBOLS”.
A job instruction chart “6” accompanies the exploded diagram, providing the order of jobs, names of 
parts, notes in jobs, etc.
Jobs “7” requiring more information (such as special tools and technical data) are described sequen-
tially. 
						

							EAS20100
SYMBOLS
The following symbols are used in this manual 
for easier understanding.
NOTE:
The following symbols are not relevant to every 
vehicle.
GME
BLSM
91011
12 13 14
15 16
LTNew
T R..
123
456
78
1. Serviceable with engine mounted
2. Filling fluid
3. Lubricant
4. Special tool
5. Tightening torque
6. Wear limit, clearance
7. Engine speed
8. Electrical data
9. Engine oil
10. Gear oil
11. Molybdenum disulfide oil
12. Wheel bearing grease
13. Lithium-soap-based grease
14. Molybdenum disulfide grease
15. Apply locking agent (LOCTITE
®).
16. Replace the part with a new one. 
						

							EAS20110
TABLE OF CONTENTS
GENERAL INFORMATION1
SPECIFICATIONS2
PERIODIC CHECKS AND ADJUSTMENTS3
CHASSIS4
ENGINE5
COOLING SYSTEM6
FUEL SYSTEM7
ELECTRICAL SYSTEM8
TROUBLESHOOTING9 
						

							1
GENERAL INFORMATION
IDENTIFICATION............................................................................................ 1-1
VEHICLE IDENTIFICATION NUMBER ..................................................... 1-1
MODEL LABEL ......................................................................................... 1-1
FEATURES..................................................................................................... 1-2
OUTLINE OF THE FI SYSTEM................................................................. 1-2
FI SYSTEM ............................................................................................... 1-3
YCC-T (Yamaha Chip Controlled Throttle)................................................ 1-4
INSTRUMENT FUNCTIONS ..................................................................... 1-7
IMPORTANT INFORMATION....................................................................... 1-11
PREPARATION FOR REMOVAL AND DISASSEMBLY ........................ 1-11
REPLACEMENT PARTS ........................................................................ 1-11
GASKETS, OIL SEALS AND O-RINGS .................................................. 1-11
LOCK WASHERS/PLATES AND COTTER PINS ................................... 1-11
BEARINGS AND OIL SEALS .................................................................. 1-12
CIRCLIPS................................................................................................ 1-12
CHECKING THE CONNECTIONS................................................................ 1-13
SPECIAL TOOLS.......................................................................................... 1-14 
						

							IDENTIFICATION
1-1
EAS20130
IDENTIFICATION
EAS20140
VEHICLE IDENTIFICATION NUMBER
The vehicle identification number “1” is stamped 
on the right side of the steering head pipe.
EAS20150
MODEL LABEL
The model label “1” is affixed to the frame under 
the passenger seat. This information will be 
needed to order spare parts.
1
1