Xerox WorkCentre M20i User Manual

Xerox CopyCentre C20, WorkCentre M20 and WorkCentre M20i User Guide Page 3-9
Copy
Paper Supply
zUse to select the 
paper source.
Status 
MapThe Status Map identifies 
which paper tray is 
selected, when a paper 
tray is empty and when an 
error occurs.¾Press [Copy].
¾To select a paper tray, press the [Paper Supply] 
key until the required tray is lit on the Status Map.
The Status Map identifies which paper tray is 
selected, when a paper tray is empty and when an 
error occurs. The Status Map has a light...

Page 3-10  Xerox CopyCentre C20, WorkCentre M20 and WorkCentre M20i User Guide 
CopySpecial Copy Features
The special Copy features available can be accessed by pressing the Menu/Exit key and then 
selecting Copy Features on the display.
Feature Description
FEATUREOPTIONSTO SELECT
ID Card Copy
zUse to copy both 
sides of an ID 
document e.g. a 
drivers license, 
onto one side of 
paper.
-¾Press [Menu/Exit].
¾Using the Navigation Keys select [Copy Features] 
and press [Enter].
¾Use the Navigation Keys to...

Xerox CopyCentre C20, WorkCentre M20 and WorkCentre M20i User Guide Page 3-11
Copy
Edge Erase
zUse to ’clean up’ 
the edges of an 
original e.g. if it 
is frayed or has 
hole punch or 
staple marks.
OffUse to de-activate the 
feature.¾Press [Menu/Exit].
¾Using the Navigation Keys select [Copy Features] 
and press [Enter].
¾Use the Navigation Keys to select [Edge Erase] 
and press [Enter].
¾Select the required Edge Erase option and press 
[Enter] to save the selection.
Small Orig 
EdgesUse to erase 6 mm...

Page 3-12  Xerox CopyCentre C20, WorkCentre M20 and WorkCentre M20i User Guide 
Copy
Book Copy
zUse when 
copying bound 
documents. If 
the document is 
too thick, lift the 
cover until its 
hinges are 
caught by the 
stopper and then 
close the cover.
OffUse to de-activate the 
feature.¾Use the Document Glass when copying bound 
documents.
¾Press [Menu/Exit].
¾Using the Navigation Keys select [Copy Features] 
and press [Enter].
¾Use the Navigation Keys to select [Book Copy] 
and press [Enter].
¾Select...

Xerox CopyCentre C20, WorkCentre M20 and WorkCentre M20i User Guide Page 3-13
Copy
Transparencies
zUse to create a 
single set of 
transparencies 
with blank or 
printed 
separators.
OffUse to de-activate the 
feature.¾Press [Menu/Exit].
¾Using the Navigation Keys select [Copy Features] 
and press [Enter].
¾Use the Navigation Keys to select 
[Transparencies] and press [Enter].
¾Use the Navigation Keys to select [Bypass] and 
press [Enter].
¾Use the Navigation Keys to select [Off], [Printed] 
or [Blank]...

Page 3-14  Xerox CopyCentre C20, WorkCentre M20 and WorkCentre M20i User Guide 
CopyUsing Interrupt
The Interrupt button is used to temporarily pause the job which is currently being copied in 
order to run a more urgent job. This feature is useful if the machine is printing a large job as it 
still provides access to Copy mode for running small, quick jobs.
Select Copy Mode
Select Interrupt
1
¾Interrupt is only available in Copy 
mode. Press the [Copy] key to 
activate Copy mode.Copy Key
2
¾To interrupt...

Xerox CopyCentre C20, WorkCentre M20 and WorkCentre M20i User Guide Page 3-15
Copy
.Load the Originals
Select the Interrupt Job Features
zOnly those 
features relevant 
to the machine 
configuration will 
be available.
3
¾Remove all staples and paper 
clips prior to loading.
¾Load the originals for the Interrupt 
job into the Document Feeder or 
load a single original on the 
Document Glass.
)For full instructions on loading 
originals refer to “Load the 
Originals” starting on page 3-3
4
¾Basic features...

Page 3-16  Xerox CopyCentre C20, WorkCentre M20 and WorkCentre M20i User Guide 
Copy
Enter the Quantity
zThe maximum 
copy quantity is 
999.
Press Start
Resume Current Job
5
Numeric Keypad
¾Use the Numeric Keypad to enter 
the number of copies required.
6
¾Press [Start] to begin the Interrupt 
job.
¾If using the Document Glass and 
[Scan Another?] displays, select 
[Yes] to scan another original, or 
[No] if all originals have been 
scanned; press [Enter].
The Interrupt job is printed.
If another urgent...

Xerox CopyCentre C20, WorkCentre M20 and WorkCentre M20i User Guide Page 3-17
Copy
Compatible Features
The following table indicates which features are compatible with other features. It also shows 
which input area can be used for a feature e.g. the Document Feeder or Document Glass.
Key:
O= Compatible
X= Incompatible
COPY 
FEATUREDocument 
Feeder or GlassID CopyBook 
CopyCreate 
BookletN UpEdge EraseMargin 
ShiftAuto 
SuppressCoversTrans-
parencies
ID Copy
Glass
Book CopyGlassX
Create BookletDocument...

Page 3-18  Xerox CopyCentre C20, WorkCentre M20 and WorkCentre M20i User Guide 
Copy
Downloaded From ManualsPrinter.com Manuals