Xerox Phaser 8860MFP User Manual

Maintenance and Cleaning
Phaser® 8560MFP/8860M FP Multifunction Printer
8-2
Maintenance and Cleaning
This section includes:
 ■Routine Maintenance  on page 8-2
■Cleaning the Paper Release Blade  on page 8-11
■Cleaning the Maintenance Kit Wiper Blade  on page 8-15
■Cleaning the Outside of the Printer on page 8-18
■Cleaning the Document Glass and Document Feeder  on page 8-18
See also:  User Safety  on page A-1
Routine Maintenance
Your system needs little maintenance to keep it  producing quality prints....

Maintenance and Cleaning
Phaser® 8560MFP/8860M FP Multifunction Printer
8-3
To load ink:
1.
Lift the control panel.
2. Open the ink cover.
8860mfp-052
8860mfp-053
Downloaded From ManualsPrinter.com Manuals 

Maintenance and Cleaning
Phaser® 8560MFP/8860M FP Multifunction Printer
8-4
3.
Locate the ink-loading bin that is low. A la bel above each bin indicates the ink stick color 
and shape for that bin.
4. Remove the ink stick from its packaging, and th en insert the ink stick into the opening of 
the appropriate ink-loading bin. Do not force  the ink stick into the ink-loading bin. Each 
ink stick is uniquely shaped to f it into the correct ink-loading bin.
5. Close the ink cover.
6. Close the control...

Maintenance and Cleaning
Phaser® 8560MFP/8860M FP Multifunction Printer
8-5
Emptying the Waste Tray
Empty the waste tray when the control panel disp lays a message stating that the waste tray is 
full.
Warning: The system’s interior may be hot. Do not touch the hot surfaces!
 
To empty the waste tray:
1. Open the side door.
8860mfp-055
Downloaded From ManualsPrinter.com Manuals 

Maintenance and Cleaning
Phaser® 8560MFP/8860M FP Multifunction Printer
8-6
2.
Pull the waste tray (labeled  B) completely out of the system.
Warning: The waste tray may be hot; handle it carefully.
Note: The waste tray may be locked if the system is in a warm-up cycle or if the ink is 
cooling following the 
Eliminate Light Stripes troubleshooting rou tine. If the tray is 
locked, close the door and wait 15 minutes before repeating Steps 1 and 2. 
3. Empty the waste tray in a waste container. The ink...

Maintenance and Cleaning
Phaser® 8560MFP/8860M FP Multifunction Printer
8-7
4.
Insert the waste tray into the system and  push it completely into the waste tray slot.
5. Close the side door.
Caution: Do not attempt to reuse the waste ink in th e system; it can damage the system. This 
damage is not covered under the system warranty.
8860mfp-058
8860mfp-059
Downloaded From ManualsPrinter.com Manuals 

Maintenance and Cleaning
Phaser® 8560MFP/8860M FP Multifunction Printer
8-8
Replacing the Maintenance Kit
The maintenance kit contains a maintenance rolle r that keeps the surface of the imaging drum 
clean and oiled. 
Order a new maintenance kit when the control pa nel displays a message that the maintenance 
kit is low. Replace it when the control panel pr ompts you to replace the maintenance kit. To 
order a replacement maintenance kit, contact you r local reseller or go to the Xerox Supplies...

Maintenance and Cleaning
Phaser® 8560MFP/8860M FP Multifunction Printer
8-9
2.
Remove the maintenance kit (labeled  A) from the maintenance kit slot.
3. Insert the replacement maintenance kit and pu sh it completely into the maintenance kit 
slot. Follow the illustrated instructions in cluded with the maintenance kit for full 
installation and dis posal information.
8860mfp-060
8860mfp-061
Downloaded From ManualsPrinter.com Manuals 

Maintenance and Cleaning
Phaser® 8560MFP/8860M FP Multifunction Printer
8-10
4.
Close the side door.
8860mfp-059
Downloaded From ManualsPrinter.com Manuals 

Maintenance and Cleaning
Phaser® 8560MFP/8860M FP Multifunction Printer
8-11
Cleaning the Paper Release Blade
To clean the paper release blade:
1. Lift the control panel.
2. Remove paper from the output tray.
8860mfp-052
8860mfp-076
Downloaded From ManualsPrinter.com Manuals