Xerox Phaser 8860DN User Manual

Printing on Specialty Media
Phaser® 8560/8860 Printer
3-45
Printing Labels
Labels can be printed from any tray. 
To order paper, transparencies, or other specialty media, contact your local reseller or go to the 
Xerox Supplies website for your printer:
■www.xerox.com/office/8560Psupplies (Phaser 8560 printer)
■www.xerox.com/office/8860supplies (Phaser 8860 printer)
See also: 
Supported Paper Sizes and Weights for Tray 1 on page 3-6
Supported Paper Sizes and Weights for Tray 2, 3, or 4 on page 3-8...

Printing on Specialty Media
Phaser® 8560/8860 Printer
3-46
Printing Labels from Tray 1
To print labels:
1.Pull down and out on the handle to open Tray 1. 
2.Open the tray extension.
8860p-006
8860p-007
Downloaded From ManualsPrinter.com Manuals 

Printing on Specialty Media
Phaser® 8560/8860 Printer
3-47 3.Insert a maximum of 50 sheets of labels into the tray with the side to be printed facedown 
and the top of the page entering the printer first. 
4.Adjust the paper guides to fit the labels loaded in the tray.
5.On the control panel, press the OK button if the correct paper size and 
Labels are 
displayed as the current setup, or select the label size and type:
a.Select 
Change setup, and then press the OK button.
b.Select the appropriate paper...

Printing on Specialty Media
Phaser® 8560/8860 Printer
3-48
Printing Labels from Tray 2, 3, or 4
To print labels:
1.Remove the tray from the printer.
2.Insert a maximum of 400 sheets of labels into the tray with the side to be printed faceup 
and the top of the page toward the front of the tray.
8860p-002
8860p-081
Downloaded From ManualsPrinter.com Manuals 

Printing on Specialty Media
Phaser® 8560/8860 Printer
3-49 3.Adjust the paper guides to fit the labels (if necessary).
■Length guide: Press the sides, then slide the guide until the arrow on the guide points 
to the appropriate paper size imprinted on the bottom of the tray. When properly 
positioned, the guide clicks into place.
■Width guides: Slide the width guides until the arrows on the guides point to the 
appropriate paper size labeled on the bottom of the tray. When properly positioned, 
the...

Printing on Specialty Media
Phaser® 8560/8860 Printer
3-50 4.Insert the tray into the tray slot, and then push it completely into the printer.
5.On the control panel:
a.Select 
Paper Tray Setup, and then press the OK button. 
b.Select either 
Tr a y  2  P a p e r  Ty p e, Tray 3 Paper Type, or Tr a y  4  Pa p e r  Ty p e, and then 
press the OK button.
c.Select 
Labels, and then press the OK button.
6.In the printer driver, select either Labels as the paper type or the appropriate tray as the 
paper...

Printing on Specialty Media
Phaser® 8560/8860 Printer
3-51
Printing Glossy Paper
Glossy paper can be printed, one- or 2-sided, from any tray. 
To order paper, transparencies, or other specialty media, contact your local reseller or go to the 
Xerox Supplies website for your printer:
■www.xerox.com/office/8560Psupplies (Phaser 8560 printer)
■www.xerox.com/office/8860supplies (Phaser 8860 printer)
Guidelines
■Do not open sealed packages of glossy paper until you are ready to load them into the 
printer....

Printing on Specialty Media
Phaser® 8560/8860 Printer
3-52
Printing Glossy Paper from Tray 1
To print glossy paper:
1.Pull down and out on the handle to open Tray 1.
2.Open the tray extension.
8860p-006
8860p-107
Downloaded From ManualsPrinter.com Manuals 

Printing on Specialty Media
Phaser® 8560/8860 Printer
3-53 3.Insert a maximum of 50 sheets of glossy paper in the tray. Adjust the paper guides to fit the 
paper.
 
4.On the control panel, press the OK button if the correct paper size and type are displayed 
as the current setup, or select the appropriate paper size and type:
a.Select 
Change setup, and then press the OK button.
b.Select the appropriate paper size, and then press the OK button.
c.Select the appropriate paper type, and then press the OK...

Printing on Specialty Media
Phaser® 8560/8860 Printer
3-54
Printing Glossy Paper from Tray 2, 3, or 4
To print glossy paper:
1.Remove the tray from the printer.
2.Insert a maximum of 400 sheets of glossy paper into the tray.
8860p-002
8860p-003
Downloaded From ManualsPrinter.com Manuals