Xerox Phaser 8860DN User Manual

Maintenance and Cleaning
Phaser® 8560/8860 Printer
5-3 To load ink:
1.Remove paper from the output tray.
2.Open the top cover.
3.Locate the ink-loading bin that is low. A label above each bin indicates the ink stick color 
and shape for that bin.
8860p-097
8860p-128
Downloaded From ManualsPrinter.com Manuals 

Maintenance and Cleaning
Phaser® 8560/8860 Printer
5-4 4.Remove the ink stick from its packaging. Place the ink stick into the opening of the 
appropriate ink-loading bin. Do not force the ink stick into the ink-loading bin. Each ink 
stick is uniquely shaped to fit into the correct ink-loading bin.
Note: The ink shapes vary by printer so be sure to order the correct ink for your specific 
printer.
Caution: Use of Phaser 8860 ink in a Phaser 8560 printer can damage your printer.
5.Close the top cover....

Maintenance and Cleaning
Phaser® 8560/8860 Printer
5-5
Emptying the Waste Tray
Empty the waste tray when the control panel displays a message stating that the waste tray is 
full. 
Warning: The printer’s interior may be hot. Do not touch the hot surfaces!
To empty the waste tray:
1.Open the side door.
2.Pull the waste tray (labeled B) completely out of the printer.
Warning: The waste tray may be hot; handle it carefully.
Note: The waste tray may be locked if the printer is in a warm-up cycle or if the...

Maintenance and Cleaning
Phaser® 8560/8860 Printer
5-6 3.Empty the waste tray in a waste container. The ink is non-toxic and can be discarded as 
normal office waste.
Note: The waste tray must be out of the printer for more than five seconds or you will 
continue to receive a 
Waste Tray Full message on the control panel.
4.Insert the waste tray into the printer and push it completely into the waste tray slot.
8860p-036
8860p-068
Downloaded From ManualsPrinter.com Manuals 

Maintenance and Cleaning
Phaser® 8560/8860 Printer
5-7 5.Close the side door.
Caution: Do not attempt to reuse the waste ink in the printer; it can damage the printer. This 
damage is not covered under the printer warranty.
8860p-038
Downloaded From ManualsPrinter.com Manuals 

Maintenance and Cleaning
Phaser® 8560/8860 Printer
5-8
Replacing the Maintenance Kit
The maintenance kit contains a maintenance roller that keeps the surface of the imaging drum 
clean and oiled. 
Note: Order a new maintenance kit when the control panel displays a message that the 
maintenance kit is low. Replace it when the control panel prompts you to replace the 
maintenance kit.
To order a replacement maintenance kit, contact your local reseller or go to the Xerox Supplies 
website for your printer:...

Maintenance and Cleaning
Phaser® 8560/8860 Printer
5-9 2.Remove the maintenance kit (labeled A) from the maintenance kit slot.
3.Insert the replacement maintenance kit and push it completely into the maintenance kit 
slot. Follow the illustrated instructions included with the maintenance kit for full 
installation and disposal information.
4.Close the side door.
8860p-032
8860p-038
Downloaded From ManualsPrinter.com Manuals 

Maintenance and Cleaning
Phaser® 8560/8860 Printer
5-10
Cleaning the Paper Release Blade
To clean the paper release blade:
1.Open the exit cover.
2.Lift the lower paper guide toward the front of the printer.
8860p-096
8860p-121
Downloaded From ManualsPrinter.com Manuals 

Maintenance and Cleaning
Phaser® 8560/8860 Printer
5-11 3.Wipe the plastic paper release blade on the lower paper guide with a pre-soaked alcohol 
cloth (using 90 percent isopropyl alcohol).
4.Lower the paper guide to its original position.
5.Close the exit cover.
8860p-084
8860p-080
8860p-018
Downloaded From ManualsPrinter.com Manuals 

Maintenance and Cleaning
Phaser® 8560/8860 Printer
5-12
Cleaning the Maintenance Kit Wiper Blade
The maintenance kit contains a wiper blade that removes excess ink. To clean the maintenance 
kit wiper blade:
1.Open the side door.
2.Remove the maintenance kit (labeled A) from the maintenance kit slot.
8860p-034
8860p-032
Downloaded From ManualsPrinter.com Manuals