Xerox Phaser 8860DN User Manual

Maintenance and Cleaning
Phaser® 8560/8860 Printer
5-13 3.Use a lint-free cloth to clean the top and upper edges of the flexible plastic wiper blade 
located next to the roller.
4.Insert the maintenance kit and push it completely into the maintenance kit slot.
5.Close the door.
8860p-070
8860p-033
8860p-038
Downloaded From ManualsPrinter.com Manuals 

Maintenance and Cleaning
Phaser® 8560/8860 Printer
5-14
Cleaning the Outside of the Printer
To remove stains, clean the outside of the printer using a soft, damp, cloth moistened with a 
mild neutral detergent. Do not spray detergent directly onto the printer.
Warning: To prevent electric shock, turn the printer off and unplug the power cord from the 
electrical outlet before cleaning the printer.
Downloaded From ManualsPrinter.com Manuals 

Ordering Supplies
Phaser® 8560/8860 Printer
5-15
Ordering Supplies
This section includes:
■Consumables on page 5-15
■Routine Maintenance Items on page 5-15
■When to Order Supplies on page 5-16
■Recycling Supplies on page 5-16
Certain consumables and routine maintenance items need to be ordered occasionally. Each 
item includes installation instructions in the package.
Consumables
Solid ink is the only consumable for the Phaser 8560/8860 printer. The ink shapes vary by 
printer so be sure to order the...

Ordering Supplies
Phaser® 8560/8860 Printer
5-16 To view information about the remaining life of the maintenance kit:
1.On the control panel, select 
Information, and then press the OK button.
2.Select 
Supplies Info, and then press the OK button.
3.Select 
Maintenance Kit Life, and then press the OK button.
See also: 
Replacing the Maintenance Kit on page 5-8
Cleaning the Paper Release Blade on page 5-10
When to Order Supplies
The control panel displays a warning when the supply nears its replacement...

Moving and Repacking the Printer
Phaser® 8560/8860 Printer
5-17
Moving and Repacking the Printer
This section includes:
■Precautions for Moving the Printer on page 5-17
■Moving the Printer Within the Office on page 5-17
■Preparing the Printer for Shipment on page 5-19
Caution: Parts of the printer are hot. To avoid personal injury or damage to the printer, allow 
the ink to solidify. Run the 
Shut Down for Moving Printer procedure on the control panel to 
cool the printer quickly.
Precautions for Moving...

Moving and Repacking the Printer
Phaser® 8560/8860 Printer
5-18 3.Within 10 seconds after turning off the printer, select 
Shut Down for Moving Printer on 
the control panel.
Note: If you receive a Power Down Error-Head not Parked message at the control 
panel, the printer is not ready to be moved. If the printhead is not locked, the printer can be 
damaged during shipment.
4.Verify that the flag in the exit tray is in the raised position. When the flag is raised, the 
printhead is locked.
5.Wait for the...

Moving and Repacking the Printer
Phaser® 8560/8860 Printer
5-19
Preparing the Printer for Shipment
Before shipping the printer:
1.Remove the maintenance kit and waste tray. See Removing the Maintenance Kit and 
Wa s t e  Tr a y  on page 5-20.
2.Turn off the printer. See Turning Off the Printer on page 5-22.
3.Pack the printer. See Packing the Printer on page 5-24.
Repack the printer using the original packing material and boxes or a Xerox repackaging kit. 
Additional instructions for repacking the...

Moving and Repacking the Printer
Phaser® 8560/8860 Printer
5-20
Removing the Maintenance Kit and Waste Tray
Before turning off the printer, remove the maintenance kit and waste tray:
1.Open the door on the right side of the printer.
2.Remove the maintenance kit (labeled A) and place it in a plastic bag for storage.
8860p-034
8860p-032
Downloaded From ManualsPrinter.com Manuals 

Moving and Repacking the Printer
Phaser® 8560/8860 Printer
5-21 3.Remove the waste tray (labeled B) from the waste tray slot. 
Warning: The waste tray may be hot; handle it carefully.
4.Empty the waste, and then place the tray in a plastic bag for storage.
Caution: Shipping the printer with the maintenance kit and waste tray installed can 
damage the printer.
5.Close the printer’s door and covers.
8860p-035
8860p-036
Downloaded From ManualsPrinter.com Manuals 

Moving and Repacking the Printer
Phaser® 8560/8860 Printer
5-22
Turning Off the Printer
To turn off the printer:
1.Press the power switch located under the interface cover on the right side of the printer to 
turn it off.
2.Within 10 seconds after turning off the printer, select 
Shut Down for Moving Printer on 
the control panel.
Caution: If you receive a Power Down Error-Head not Parked message at the control 
panel, the printer is not ready to be moved. If the printhead is not locked, the printer can...