Xerox Phaser 8860DN User Manual

Supported Paper and Media
Phaser® 8560/8860 Printer
3-5
Paper Storage Guidelines
Providing good storage conditions for your paper and other media contributes to optimum 
print quality.
■Store paper in dark, cool, relatively dry locations. Most paper items are susceptible to 
damage from ultraviolet (UV) and visible light. UV radiation, which is emitted by the sun 
and fluorescent bulbs, is particularly damaging to paper items. The intensity and length of 
exposure to visible light on paper items should...

Supported Paper and Media
Phaser® 8560/8860 Printer
3-6
Supported Paper Sizes and Weights for Tray 1
Tray 1 Paper 
60–220 g/m2 (16–40 lb. Bond, 50–80 lb. Cover)
Index Card3.0 x 5.0 in.Custom Sizes
Short edge: 76–216 mm (3.0–8.5 in.)
Long edge: 127–356 mm (5.0–14.0 in.)
Margins
5 mm on all sides Statement5.5 x 8.5 in.
Executive7.25 x 10.5 in.
Letter8.5 x 11.0 in.
US Folio8.5 x 13.0 in.
Legal8.5 x 14.0 in.
A4210 x 297 mm
A5148 x 210 mm
A6105 x 148 mm
B5 JIS182 x 257 mm
ISO B5176 x 250 mm
8860p-008...

Supported Paper and Media
Phaser® 8560/8860 Printer
3-7
Monarch3.87 x 7.5 in.Margins
■5 mm on the side, 15 mm on the top and 
bottom:
Monarch
#10 Commercial 
A7
Baronial (#5 ½)
#6 ¾
Choukei 3 Gou
Choukei 4 Gou
■5 mm on the side, 15 mm on the top, 
20 mm on the bottom:
6 x 9
DL
C5 #10 Commercial4.12 x 9.5 in.
A75.25 x 7.25 in.
Baronial (#5 ½)4.375 x 5.75 in.
#6 ¾3.625 x 6.5 in.
6 x 96.0 x 9.0 in.
DL110 x 220 mm
C5162 x 229 mm
Choukei 3 Gou120 x 235 mm
Choukei 4 Gou90 x 205 mm
Tray 1 Paper (Continued)...

Supported Paper and Media
Phaser® 8560/8860 Printer
3-8
Supported Paper Sizes and Weights for Tray 2, 3, or 4 
Tray 2, 3, or 4 Paper 
60–120 g/m2 (16–32 lb. Bond)
Statement5.5 x 8.5 in.Margins
5 mm on all sides
Executive7.25 x 10.5 in.
Letter8.5 x 11.0 in.
US Folio8.5 x 13.0 in.
Legal8.5 x 14.0 in.
A4210 x 297 mm
A5148 x 210 mm
A6105 x 148 mm
B5 JIS182 x 257 mm
ISO B5176 x 250 mm
#10 Commercial4.12 x 9.5 in.Margins
■5 mm on the side, 15 mm on 
the top and bottom:
#10 Commercial 
■5 mm on the side, 15 mm...

Loading Paper
Phaser® 8560/8860 Printer
3-9
Loading Paper
This section includes:
■Loading Paper in Tray 1 on page 3-9
■Using Manual Feed on page 3-16
■Loading Paper in Tray 2, 3, or 4 on page 3-17
Loading Paper in Tray 1
Use Tray 1 for a wide range of media types including:
■Plain paper, letterhead, colored paper, and pre-printed paper
■Card stock
■Labels
■Envelopes
■Transparencies
■Specialty media (including business cards, photo paper, postcards, pre-punched paper, 
duradocument paper, and trifold...

Loading Paper
Phaser® 8560/8860 Printer
3-10 To load paper or other media in Tray 1:
1.Pull down and out on the handle to open Tray 1.
2.Open the tray extension.
8860p-006
8860p-007
Downloaded From ManualsPrinter.com Manuals 

Loading Paper
Phaser® 8560/8860 Printer
3-11 3.Insert paper, transparencies, envelopes, or specialty media into the tray.
■Single-sided printing: Insert the side to be printed facedown with the top of the page 
entering the printer first.
8860p-090
8860p-009
Downloaded From ManualsPrinter.com Manuals 

Loading Paper
Phaser® 8560/8860 Printer
3-12
■2-sided printing: Insert side one faceup with the bottom of the page entering the 
printer first.
■Side-flap envelopes: Insert the envelopes with the flap side up and the flap toward the 
left side of the tray.
8860p-106
XEROX
8860p-010
Downloaded From ManualsPrinter.com Manuals 

Loading Paper
Phaser® 8560/8860 Printer
3-13
■End-flap envelopes: Fold down the flaps before placing them in the tray. Insert the 
envelopes with the flap side up and the flap entering the printer first.
■Pre-punched paper: Insert the side to be printed facedown with the holes toward the 
right side of the tray.
Note: When using pre-punched paper, adjust the print margins to accommodate the holes. 
Printing over the holes may cause ink to transfer onto subsequent pages. A minimum 
margin of 19 mm (0.75...

Loading Paper
Phaser® 8560/8860 Printer
3-14 4.Adjust the paper guides to fit the paper loaded in the tray.
5.To use the current tray setup, press the OK button on the control panel. If you load a new 
paper size and type in the tray, do the following:
a.Select 
Change setup, and then press the OK button.
b.Select the paper size, and then press the OK button. 
c.Select the paper type, and then press the OK button. 
See also: 
Supported Paper Sizes and Weights for Tray 1 on page 3-6
Printing on Specialty...