Xerox Phaser 6125N User Manual

Phaser® 6125 Color Laser Printer
5-1 This chapter includes:
 ■Control Panel Menus on page 5-2
■Description of Menu Items on page 5-4
■Menu List on page 5-11
Using the Control 
Panel Menus
Downloaded From ManualsPrinter.com Manuals 

Control Panel Menus
Phaser® 6125 Color Laser Printer
5-2
Control Panel Menus
This section includes:
 ■Menu Configuration on page 5-2
■Changing Menu Settings on page 5-3
Menu Configuration
The menus that can be accessed from the control panel are as follows:
Each menu is configured in different levels. Set the printer settings by selecting the objective 
menus or items structure level.
See also: 
Description of Menu Items on page 5-4
Menu Content
Information Pages Use the Information Pages menu to print...

Control Panel Menus
Phaser® 6125 Color Laser Printer
5-3
Changing Menu Settings
Changing the Power Saver Time
In this example, you set the transitional time to the Power Saver Mode.
1.To display the menu screen, press the Menu button at the print screen.
2.Press the Up Arrow or Down Arrow button until 
Admin Menu is displayed, and then 
press the Forward Arrow or OK button.
3.Press the Up Arrow or Down Arrow button until 
System Setup is displayed, and then 
press the Forward Arrow or OK button.
4.Press...

Description of Menu Items
Phaser® 6125 Color Laser Printer
5-4
Description of Menu Items
This section includes:
 ■Tray Settings on page 5-4
■Information Pages on page 5-5
■Billing Meters on page 5-6
■Admin Menu on page 5-6
Tray Settings
There is one submenu under the Tray Settings menu: Tray. You can set paper size, paper type, 
or Display Popup for this tray.
Common Settings for the Paper Tray
When the size or type of paper that is loaded is different from the setting, the print quality may 
fall or...

Description of Menu Items
Phaser® 6125 Color Laser Printer
5-5
Information Pages
Prints various types of reports and lists.
■The information pages are printed on A4 size paper. Load A4 size paper into the tray. 
■For the procedure for printing information pages, refer to Printing Information Pages on 
page 5-5.
Printing Information Pages
Information pages are printed from the control panel.
1.Press the Menu button to display the Menu screen.
2.Press the Up Arrow or Down Arrow button until 
Information...

Description of Menu Items
Phaser® 6125 Color Laser Printer
5-6
Billing Meters
Displays the number of processed print jobs on the control panel. The meter is divided 
according to the color modes.
See also: 
Checking Page Counts on page 8-9
Admin Menu
This menu contains four submenus:
■Network Setup
■System Setup
■Maintenance Mode
■Control Panel
Item Description
Color Impressions Displays the total number of pages printed in color.
Black Impressions Displays the total number of pages printed in...

Description of Menu Items
Phaser® 6125 Color Laser Printer
5-7
Network Setup
Specifies printer settings affecting jobs sent to the printer through a network port.
■The settings in the Network Setup menu cannot be set when entering this menu during 
printing.
■You need to restart the printer to activate the new settings. After making the settings, turn 
off the printer and then turn it on again.
Item Description
Ethernet Specifies the communication speed and the modes of Ethernet.
■Auto (default)...

Description of Menu Items
Phaser® 6125 Color Laser Printer
5-8
System Setup
System Setup menu is used to make the printer operation settings, such as for alarm and power 
saver mode.
Host Access List Specifies blocking the reception of data from certain IP addresses.
Reset Defaults Initializes network data stored in NVM. The NVM is a nonvolatile memory that 
stores the printer settings even after power off. Initializing the NVM will revert the 
value for each item of the Wired Network menu to default....

Description of Menu Items
Phaser® 6125 Color Laser Printer
5-9
Maintenance Mode
Use this menu to initialize the NVM, or to adjust the configurations for each type of paper.
Auto Log Print Specifies whether to automatically print information about the printed data that 
has been processed in the printer (Job History Report).
■Off (default) 
Select this if you do not want to print the Job History Report automatically 
even if the number of print jobs exceeds 22.
■On 
Automatically prints a report when the...

Description of Menu Items
Phaser® 6125 Color Laser Printer
5-10
Control Panel
Specifies whether to limit menu operations with a password to avoid changing the printer 
settings by accident.
Toner Refresh Resolves PQ defects associated with charge problems after low coverage print 
jobs.
Drum Refresh Helps improve imaging unit performance after over exposure to light.
Init PrintMeter Initializes the print meter.
Initialize NVM Initializes the settings stored in the NVM except for the network settings. The...