Xerox DocuPrint 4590 EPS User Manual

Xerox 4590 EPS/4110 EPS User Guide
5-9
5. Maintenance
6.Push the removed cartridge back into the original position 
until a click sound is heard.
7.Close the right cover on the finisher.
NOTE:A message will be displayed and the machine will not 
operate if the right cover is even slightly open.
Replacing the staple cartridge for booklets
When a booklet finisher (optional) is installed and it is time to 
replace the staple cartridge for booklets, a message appears on 
the Control Panel screen....

Xerox 4590 EPS/4110 EPS User Guide
5-10
5. Maintenance
2.Pressing the lever to the right, pull out the booklet staple 
cartridge. 
3.Hold the tabs of the booklet staple cartridge and then lift to 
remove it.
4.Holding the tabs of a new booklet staple cartridge, return the 
cartridge to the original position and gently push it until it 
clicks.
5.Return the unit to its original position.
6.Close the right cover of the finisher.

ù

ú
Downloaded From ManualsPrinter.com Manuals 

Xerox 4590 EPS/4110 EPS User Guide
5-11
5. Maintenance
NOTE:A message will be displayed and the machine will not 
operate if the right cover is even slightly open.
Replacing the staple waste container
The staple waste container collects the unused staple cuttings 
from the staple cartridge. A message will display on the Control 
Panel screen indicating that the container is full and it is time to 
replace it.
NOTE:The following replacement procedures are also illustrated 
on the inside of the finisher...

Xerox 4590 EPS/4110 EPS User Guide
5-12
5. Maintenance
4.Align the bottom of the new staple waste container onto the 
support shelf..
5.Push the container into the machine until you hear a click 
noise. After a short delay, the new staple waste container will 
lock automatically.
6.Close the right cover of the finisher.
NOTE:A message will be displayed and the machine will not 
operate if the right cover is even slightly open.
Emptying the punch scrap container
The Control Panel screen will display a...

Xerox 4590 EPS/4110 EPS User Guide
5-13
5. Maintenance
NOTE:Remove the container while the machine is powered on. If 
you switch the power off when emptying the scrap container, the 
machine will not be able to detect that the scraps have been 
disposed. Ensure that all scraps are discarded.
1.Make sure that the machine has stopped, and then open the 
right cover on the finisher. 
2.Pull out the punch scrap container.
3.Discard all the punch scraps in an appropriate container.
4.Insert the empty punch...

Xerox 4590 EPS/4110 EPS User Guide
5-14
5. Maintenance
CAUTION:Pulling out the container and pushing it back into 
place resets the punch counter setting to 0. Make sure to 
completely empty the container so the counter number accurately 
matches the state of the container.
5.Close the right cover of the light finisher.
NOTE:A message will be displayed and the machine will not 
operate if the right cover is even slightly open.
Cleaning the machine 
The following procedure describes how to clean the...

Xerox 4590 EPS/4110 EPS User Guide
6- 1
6. Problem Solving
Troubleshooting
Use the following information for troubleshooting procedures to 
solve the problems.
Power is not switched On.CauseIs the power switch on the machine turned off?
No YesActionTurn the power switch on.
Refer to “Power on/off” in Chapter 2.
No
CauseIs the power cord plugged into the power outlet?
ActionTurn the power switch off and then firmly plug in the power 
cord. Then turn the power switch on.
Refer to “Power on/off” in Chapter...

Xerox 4590 EPS/4110 EPS User Guide
6-2
6. Problem Solving
A message is displayed.CauseHas a paper jam occurred?
No YesActionFor information on paper jams, refer to “Paper Jams” in this
chapter.
No
CauseAn error code displayed?
ActionRefer to “Error Code” in this chapter.
The machine is not working 
properly.ActionRefer to “Machine Trouble” in this chapter.
No Yes
Image quality is not good.ActionRefer to “Image Quality Problems” in this chapter.
No Yes
Trouble during printing.ActionRefer to “Trouble...

Xerox 4590 EPS/4110 EPS User Guide
6-3
6. Problem Solving
Machine trouble
If you think some trouble is occurring on the machine, check the 
machine status again.
WARNING:Precision components and high-voltage power 
supplies are used on the machine. Never open or remove 
machine covers that are screwed shut unless specifically 
instructed in the User Guide. A high-voltage component can cause 
electric shocks. When opening the panels and covers that are 
screwed shut to install or detach optional...

Xerox 4590 EPS/4110 EPS User Guide
6-4
6. Problem Solving
Online indicator 
does not light 
even though you 
instructed it to 
print.Is the interface cable 
disconnected?Turn the power switch off, unplug the power cord 
from the power outlet, and check the interface cable 
connection.
For information about network connectivity, refer to 
the System Administration Guide.
Is the environment correctly set on 
the personal computer?Check the DocuSP print driver and other 
environment settings on the personal...