Xerox ColorQube 9303 User Manual

Device Settings
ColorQube™ 9301/9302/9303
Administration and Accounting281
Enter PagePack Passcode
This option is used to setup the optional 
services available on the device. To enable 
a service enter the Authorisation Code 
provided with the option and select Enter.
Once a service has been enabled, it may 
require configuring using Internet Services. 
For further instructions, refer to the System 
Administration Guide.
Note Some services will require a 
Reboot to activate them on the 
device.
Low...

Device Settings
ColorQube™ 9301/9302/9303
Administration and Accounting 282
Quick Setup Home
This option is used to quickly setup your 
device with the key information required in 
order to start using the features and 
functions.
Select the Quick Setup Home option to 
access the following settings:
•IP Address Settings on page 282
•Contact Numbers on page 283
IP Address Settings
Use to enter the IP Address Settings for 
the system. There are several screens for 
entering the IP Address information,...

Device Settings
ColorQube™ 9301/9302/9303
Administration and Accounting283
Contact Numbers
Use to enter your Customer Support and 
Supplies Telephone numbers which are 
displayed on the device.
•Customer Support Number is 
selected to enter the Xerox Support 
number supplied with your device. 
Enter the number using the keyboard 
and select Save. To delete an incorrect 
character entry use the backspace 
key, or to delete the entire entry select 
Clear.
•Supplies Number is selected to enter the telephone...

Device Settings
ColorQube™ 9301/9302/9303
Administration and Accounting 284
•Print Configuration at Power On set to Ye s to print a configuration when the device is powered 
on, or No to disable the option.
•Print Now prints the configuration report immediately.
Reset UI to Factory Settings
This option resets all the control panel and 
touch screen settings back to their original 
state when the device was setup at the 
fa c t o r y .
A confirmation screen is displayed, select 
Reboot to continue with...

Service Settings
ColorQube™ 9301/9302/9303
Administration and Accounting285
Service Settings
The Service Settings are used to customize 
options which are specific to individual 
services, such as Copy, Fax or Print.
Copy Service Settings
Select the Copy Service Settings option to 
access the following settings:
•Feature Defaults on page 285
•Edge Erase Presets on page 286
•Image Shift Presets on page 286
•Reduce/Enlarge Presets on page 287
•Reading Order Options on page 287
•Auto Image Rotation on page...

Service Settings
ColorQube™ 9301/9302/9303
Administration and Accounting 286
Edge Erase Presets
Enables you to setup the Edge Erase pre-
set entries. There are 2 pre-named preset 
options and an Available setting. All of the 
presets can be customized with names and 
settings to meet your needs.
Note The device applies an 
automatic edge deletion to all printed 
output.
• Select the preset option required from 
the Presets menu.
• Select the sides options as required, 
Side 1, Side 2 and Mirror Side 1.
•...

Service Settings
ColorQube™ 9301/9302/9303
Administration and Accounting287
Reduce/Enlarge Presets
This feature enables you to set 10 
proportional reduce/enlarge preset ratios 
and 4 preset independent reduce/enlarge 
ratios.
• Select Proportional and then enter 
the preset ratios required for each 
preset option. Between 25% and 
400% can be entered.
• If you wish to reset all the 
proportional preset values back to the 
default settings, select Reset All to 
Default
•Use the Common Values option to...

Service Settings
ColorQube™ 9301/9302/9303
Administration and Accounting 288
Auto Image Rotation
The Auto Image Rotation feature 
optimizes image output based on the job 
settings selected. Disabling Auto Rotation 
may result in image loss.
•Use the When Auto R/E Selected 
options to instruct the system how to 
proceed if the Auto Reduce/Enlarge 
feature is selected. Select Auto 
Rotate as needed to allow automatic 
rotation, or Disable Rotation to 
restrict the device from rotating the 
image.
•Use the...

Service Settings
ColorQube™ 9301/9302/9303
Administration and Accounting289
Feature Defaults
Use to select the default settings for each 
programing feature within the Embedded 
Fa x service.
• Select the default required for each 
feature in each of the programing 
tabs.
• Select Save Defaults. The settings 
selected become the default settings 
for each fax job.
• A confirmation screen is displayed, 
select Done to return to the previous 
screen.
Fax Country Setting
Use this option to select the...

Service Settings
ColorQube™ 9301/9302/9303
Administration and Accounting 290
Line 2 Setup
If the Extended Fax option is installed the device can support two analogue fax lines. This option 
enables you to set up Line 2.
•Fax Number is the number of the phone line your system is attached to. Enter the number for Line 
2 using the numeric keypad.
•Line Name is a friendly name to logically identify the system. Enter the name using the keyboard 
provided. Use the backspace key to delete an incorrect...