Xerox ColorQube 9303 User Manual

Properties
ColorQube™ 9301/9302/9303
Internet Services231
Properties
The Properties option contains all the 
settings, setups and default values for 
installing and setting up the device. These 
are protected by a user name and 
password and should only be changed by 
your System Administrator.
Refer to the System Administrator Guide 
for information about configuring your 
device.
Downloaded From ManualsPrinter.com Manuals 

Support
ColorQube™ 9301/9302/9303
Internet Services 232
Support
The Support option contains the General and Tro u b l e s h o o t i n g  tabs.
The General tab displays the name and 
telephone number of your System 
Administrator and the telephone numbers 
you should use for Customer Support and 
Supplies.
Use the Tro u b l e s h o o t i n g tab to access 
reports and information to help identify 
and resolve device problems.
Downloaded From ManualsPrinter.com Manuals 

Help
ColorQube™ 9301/9302/9303
Internet Services233
Help
Select the Help button to display the Help screens.
The structure of the Help screens corresponds to the structure of the Internet Services options.
Use the menu on the left of the Help page to access descriptions and instructions about all the 
features and functions of Internet Services.
Downloaded From ManualsPrinter.com Manuals 

Help
ColorQube™ 9301/9302/9303
Internet Services 234
Downloaded From ManualsPrinter.com Manuals 

Version  1.0
09/10
Xerox
®
 ColorQube™ 
9301/9302/9303
Paper and Media
Downloaded From ManualsPrinter.com Manuals 

©2010 Xerox Corporation. All Rights Reserved. Unpublished rights reserved under the copyright laws of the United States. Contents 
of this publication may not be reproduced in any form without permission of Xerox Corporation.
XEROX®, XEROX and Design® and ColorQube® are trademarks of Xerox Corporation in the United States and/or other countries.
Changes are periodically made to this document. Changes, technical inaccuracies, and typographic errors will be corrected in 
subsequent editions.
Document...

ColorQube™ 9301/9302/9303
Paper and Media237
Contents
Introduction  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  238
Trays 1 and 2  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  239
Loading Trays 1 and 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....

Introduction
ColorQube™ 9301/9302/9303
Paper and Media 238
Introduction
This guide describes the different types of media that can be used in your device, the paper trays 
available and the types and sizes of media that can be loaded and fed from each tray. 
It also identifies the orientation the media can be loaded, Long Edge Feed (LEF) or Short Edge Feed 
(SEF). 
The trays automatically detect low media and out of media conditions. A warning message is 
displayed on the screen when a tray requires...

Trays 1 and 2
ColorQube™ 9301/9302/9303
Paper and Media239
Trays 1 and 2
Trays 1 and 2 are located on the front of the device and feed the majority of media sizes. Media can be 
loaded Long Edge Feed (LEF) or Short Edge Feed (SEF). Your device uses a system of programable 
settings to manage the trays and media. These settings are established by your System Administrator 
who can set Trays 1 and 2 to Fully Adjustable or Dedicated. 
•Fully Adjustable if this option is set, the paper settings screen is...

Tra y s  1  a n d  2
ColorQube™ 9301/9302/9303
Paper and Media 240
Loading Trays 1 and 2
If Tray 1 or Tray 2 is set as a Dedicated tray, the media requested must be loaded in the tray and the 
settings cannot be adjusted.
CAUTION:A problem will occur if a tray is opened while it is being used to feed media. Do not 
open Tray 1 if Tray 2 is open.
1. Open the tray.
2. Place the media in the tray. Media 
must be positioned against the left 
side of the tray.
• Load pre-printed paper and 
labels face-up and...