Vodavi Starplus Hybrid Key Telephone System Installation Manual

STARPLUS’ Digiil systems TF NO: 43 
PRIVACY RELEASE TONE OPTION 
Description: 
Privacy is insured on all communications in the system. If desired, the customer may elect to disable the Automatic 
Privacy feature, thus allowing up to three other stations to join in on an existing CO Line conversations. 
NOTE: Disabling of the privacy feature may be limited by federal, state or local law, so check the relevant laws in 
your area before disabling privacy. 
l Per CO Line Option: 
This feature allows each CO...

STARPLUS” Digiil SystemS TF NO: 43 
FLASH RATES (Programmable) 
Description: 
The flash rates for the following features can now be programmed to 16 different options in admin programming: 
47 
l Incoming CO line ringing: defaults to 30 ipm flash 
l Incoming intercom ringing: defaults to 120 ipm flutter 
l Call Forward: defaults to 30 ipm flash 
l Message Waiting: defaults to 15 ipm flash 
All other flash rates in the system are fixed at the rates shown in Table 400-13 DSS/BLF Button Visual Indicators,...

STARPLUS@ Digiii systems 
TF NO: 43 
Flash Rates (Cont’d) 
A banning CO Line Ringing: 
1, Press the INCOMING CO RINGING flexible button (Button #l). The following message is shown on the display 
phone: 
2. Enter a two-digit value on the dial pad to correspond to one of the 16 available options. 
3. Press the HOLD button to save the entry. Confirmation tone is heard and the display will now update. 
Default By default, the Incoming CO Ringing is set for a 30 ipm flash. 
B. incoming intercom Ringing: 
1....

STARPLUS@ Digiil Systems 
TF NO: 43 
Flash Rates (Cont’d) 
D. Message Waiting: 
1. Press the MESSAGE WAITING flexible button (Button #4. The following message is shown on the display phone: 
2. Enter a two-digit value on the dial pad to correspond to one of the 16 available options. 
3. Press the HOLD button to save the entry. Confirmation tone is heard and the display will now update. 
Default: By default, the Message Waiting is set for a 15 ipm flash. 
Vodavi Communications Systems 
Page 19 of56 ?F NO....

STARPLUS” Dig&d systems TF NO: 43 
CO LINE AlTRIBUTES 
DISA Programming Options (Button #7) 
Trunk Direction (Button #13) 
Ring Delay Timer (Button #14) 
Vodavi Communications Systems 8300 E. Raintrw Drive 
Page 20 of 56 
Scottsdale, AZ 85260 
TF NO. 43 
(602) 443aoo  

STARPLUS” Digital Systems TF NO: 43 
DISA PROGRAMMING OPTIONS 
Description: 
A line can be assigned as a DISA line during night service only or on a 24- hour basis. Additionally, a DISA line 
is allowed to follow station forwarding during night service only or on a 24-hour basis. 
An unlimited number of DISA lines can be .programmed into the system. A DISA access code can also be 
programmed. Incoming DISA callers may dial any valid internal station or access outside line groups. A CO line 
ringing at a...

STARPLUS’ Digital Systems TF NO: 43 
DISA Programming Options (Cont’d) 
4. Press the DISA flexible button (Button #7). 
5. Enter a one-digit value on the dial pad to indicate type of DISA desired. 
[0] = No DISA (disable DISA) 
[l] = 24-Hour DISA 
[2] = Night DISA only 
[3] = 24-Hour DISA with forwarding 
[4] = Night DISA only with forwarding 
6. Press the HOLD button to save the entry. Confirmation tone is heard and the display will now update. 
Default By default, there are no outside lines assigned as...

STARPLUS’ Digiil SyStemS TF NO: 43 
TRUNK DIRECTION 
Descriphkn: 
CO Lines can be programmed on a per CO tine basis for the type of CO Line desired: Incoming, Outgoing, or Both 
incoming and outgoing. 
l Incoming: Restricts the CO Line for incoming calls only: Users cannot press a CO line button or dial CO line 
access code to access a CO line. Users can answer a CO call and then transfer the call. Users can place call 
on hold, park the call, and other stations can pick-up the call. 
l Outgoing...

STARPLUS” Dig&al Systems TF NO: 43 
RING DELAY TIMER 
Desuipth: 
The Ring Delay timer has been added to the Starplus Digital Systems to accommodate ICLID interface 
requirements. 
The Ring Delay timer is started whenever a CO Line detects incoming ringing. When the timer expires, CO line 
ringing will be detected by digital terminals and Single Line telephones. The purpose of this timer is to wait until 
after the first ring cycle to be detected by the digital system in order for ICLID information to be...

STARPLUS” Digiil Systems TF NO: 43 
STATION ATTRIBUTES 
CO Line Ringing Options 
, 
Vodavi Communications SystertIS 
Page 25 of 56 TF NO. 43 
8300 E. Raintrw Drive 
Scoltsdale, AZ 85260 W) 443-ml