Vodavi Starplus Hybrid Key Telephone System Installation Manual

STARPLUS” Digital systems l-F NO: 43 
The download file will contain a series of ASCII strings which will contain a checksum at the end of the string. The 
checksum will be verified when the system receives the string back. An error in the checksum will result in rejection 
of the string. In addition an error message will be sent to the PC when a string is received with an error. When 
transmission of the download file is complete, a confirmation tone will be heard. 
.The following is a list of strings...

STARPLUS@ Digiil systems TF NO: 43 
37. STATUS-REQUEST 
38. END-OF-FILE 
Forward and backward compatibility will be maintained. If the file being uploaded from the PC contains less 
information in a string then is required by the system database, the system will maintain default information in the 
area not covered by the string. If the file being uploaded from the PC contains more information in a string than 
is required by the system database, the system will ignore the additional information. 
To...

STARPLUS” Digiil Systems TF NO: 43 
pressed during the download routine without a filename entered, the default filename will be: PCPLUS.LOG. 
NOTE: If the PCPLUSLOG file is not re-named or deleted before the next download routine is performed, the 
downloaded information will append the existing LOG file instead of over-writing it. 
5. After the file is uploaded to the system, the ADM> prompt will be returned to the PC monitor. Enter an “M” at 
the prompt and press the IGJ key. 
, , 
MIERPlBXMiI40 
adaa...

STARPLUS@ Digital Systems 
TF NO: 43 
SYSTEM TIMERS 
Reminder Ring Timer 
Release Guard Timer 
Page9of56 TF NO. 43 
Vodavi Communications Systems 6300 E. Raintree Drive 
Scottsdale, AZ 85260  

STARPLUS” Dfgiil Systems TF NO: 43 
A REMINDER RING TIMER 
Description: 
When a CO line rings at a busy station, the call rings at the station using a muted ring (default) signal. The CO 
Ringing Option feature allows a user to receive reminder ring at his station instead of muted ring. This timer 
provides a reminder ring every time the timer expires, as long as the incoming CO call has not hung up. 
If the user continues his present conversation and the CO party does not hang up, the Reminder Ring...

STARPLUS@ Digi@ Systems 
TF NO: 43 
SYSTEM TIMERS (Ccmt’d) 
B. Release Guard Timer 
Description: 
The Release Guard Timer is designed for the CO tine loop interface to accommodate the variations found from 
one Central Office to another. The timer is started whenever a CO line is released. If a user attempts to access 
a CO line before the Release Guard timer expires, his LED will illuminate indicating the CO line has been seized, 
however the CO line will not be seized until the timer expires. The user...

STARPLUS’ Digiil Systems TF NO: 43 
SYSTEM FEATURES 
Call Cost Display (Available with optional software) 
Handset Volume Adjustment 
Call Qualifier Tone 
Privacy Release Tone Option 
Flash Rates (Programmable) 
Vodavi Communications Systems 
Page 12 of 56 TF NO. 43 
8300 E. Raintree Drive Scottsdale, AZ 85260 (602) 443-6ooo  

STARPLUS” Digital systems TP NO: 43 
CALL COST DISPLAY 
Desaiptfon: 
The Call Cost Display Feature provides a means for a user to view the approximate cost of each call made. This 
approximate cost will also be printed as part of the SMDR record. 
The Call Cost Display will replace the call duration display when a call is made using LCR. This display is enabled 
in programming. 
, The cost information is programmable by selecting one of the 16 route list tables and one of the four time periods. 
This...

STARPLUS~ Digiil Systems TF NO: 43 
HANDSET VOLUME ADJUSTMENT 
Description: 
This feature provides the user with a flexible button that can be programmed on their keyset. When programmed, 
allows the keyset or SLT user to increase/decrease the handset receiver gain while on a CO call or intercom call. 
This volume setting will be stored on a per station basis until changed. 
A. Keyset OperatIoni 
While on a CO call: 
1. Press pre-programmed* Handset Receiver Gain flex button to enter the volume...

sTARPLUS@ Digital Systems TF NO: 43 
CALL QUALIFIER TONE 
Description: 
This feature provides a means for an agent to enter codes on ACD type calls that identify the call. This feature 
provides up to four digits for the ACD SMDR reporting function which are compatible with the Basic ACD software 
package. This feature will permit up to 12-digits to be entered, however, only the first four digits are provided for 
in the SMDR record. 
Programming: 
If any System Features are to be changed: 
1. Press...