Vodavi Starplus 2448ex Hybrid Key Telephone System Installation Manual

Hybrid Key Telephone System STARPLUS@ 2446EX 
STATION PROGRAMMING (Cont’d) 
A. Paging Access 
Programming Steps 
Description 
1. Press the PAGE flexible button (Page A, Button 
PAGE. Stations can individually be allowed or de- 
#l). 
nied the ability to make pages. This applies to ail 
l LED on = Paging is allowed internal and external zone paging. A station denied 
l LED off= Paging is denied access to paging may still answer a meet-me page 
announcement. (Station COS 6 will not deny a sta- 
2. Press...

SI-ARPLUS@ 2448EX Hybrld Key Telephone System 
STATION PROGRAMMING (Cont’d) 
E. 
1. 
2. 
F. 
1. 
2 
G. 
1. 
2. 
H. 
1. 
2. 
Preferred Line Answer 
Programming Steps 
Press the PLA flexible button (Page A, Button 
w. 
l LED on = Preferred Line Answer is allowed 
l LED off= Preferred Line Answer is denied 
Press the HOLD button to enter data. 
SLT Add-On Conference 
Prooramming Steps 
Press the CSLT flexible button (Page A, Button 
W- 
l LED on = SLT Add-On Conference is en- 
abled 
l LED off= SLT Add-On...

Hybrid Key Telephone System sTARPLUS@ 2446BX 
STATION PROGRAMMING (Cont’d) 
I. LCR Class of Service 
Programming Steps 
1. Press the LCOS flexible button (Page A, Button 
m 
2. Enter a one-digit number between 0 and 6 to 
correspond to the LCR Class of Service de- 
sired. 
3. Press the HOLD button to enter data. Description 
LCOS. Stations can be given a class of service 
assignment for Least Cost Routing. The range is 
between 0 and 6 with 0 being unrestricted and 6 
being the most restricted. A station...

sTARPLUS@ 2448EX Hybrid Key Telephone System 
STATION PROGRAMMING (Cont’d) 
Page B Feature Programming 
Programming Steps 
The remaining station features are located and pro- 
grammed on Page B. 
A Press [PG B] button. The display of current 
programming for those features will appear as 
follows: 
Where: 
,---Y 
J. 
1. 
2. 
xx= 
XX= Station Range (1 O-57) 
5 Page “B” Features 
ID= Station Identification (O-7) 
CO5 Class of Service (1-6) 
SPK= Speakerphone Gption (O-2) 
A= Pickup Group (l-4) 
5 Paging...

Hybrid Key Telephone System sTARPLUS@ 2446u( 
DSS Console Map 1 
DSS Console Map 3 
Figure 630-l DSS Console Maps l-3 Button Assignment 
630-6 Issue 3, August 1991  

sTARPLUS* 2448u( 
Hybrid Key Telephone System 
STATION PROGRAMMING (Cont’d) 
K 
1. 
2 Station Class of Service (COS) 
Programming Steps 
Press the COS flexible button (Page 6, Button 
w. Description 
Enter a two-digit Class of Senrice entry as 
follows: 
l 1 st digit is day COS 
l 2nd digit is night COS COS. Each stations must be assigned a certain COS 
for day mode operation, and also be assigned a 
COS for night mode operation. The night COS goes 
into affect when the system is placed into the night...

Hybrid Key Telephone System sTARPLUS@ 2446u< 
STATlON PROGRAMMING (Cont’d) 
M. Pick-Up Group(s) Programming 
Programming Steps 
1. Press the PKUP flexible button (Page B, Button 
w. 
2. Enter a one-to-four digit number to program 
pickup groups. 
o= nogroup 
I= Group 1 
2= Group 2 
3= Group3 
4= Group 4 
3. Press the HOLD button to enter data. Description 
PKUP. Each station is assigned into pick up groups. 
Stationscan be in any combination of the four groups 
or in no group at all. 
Default: By...

%ARPLUS@ 2448EX 
Hybrid Key Telephone System 
-Y 
STATION PROGRAMMING (Cont’d) 
0. Preset Call Forward Programming 
Programming Steps 
1. Press the PREFW flexible button (Page 8, But- 
ton #6). 
2. Enter a two-digit number to determine the des- 
tination where calls are to be routed when the 
preset forward timer expires. 
1 O-571 Station Numbers 
, 690-697= Voice Mail Groups l-6 
890-897s UC0 Groups 18 
3. Press the HOLD button to enter data. Display 
now updates. 
7 
Description 
PREFW. This feature...

Hybrid Key Telephone System sTARPLUS@ 2448EX 
STATION PROGRAMMING (Cont’d) 
P. CO Line Group Access 
Programming Steps 
1. Press the ACC flexible button (Page B, Button 
m. 
2. Enter up to seven digits (0, or l-7) for the 
outside line groups the station will have access 
to. 
0 40 access 
1 =access to Group 1, Code 9 or 81 
2 =access to Group 2. Code 82 
3 =access to Group 3, Code 83 
4 =access to Group 4, Code 84 
5 =access to Group 5, Code 85 
6 =access to Group 6, Code 86 
7 =access to 
Group 7, Code...

BARPLUS@ 2448EX 
Hybrid Key Telephone System 
-, 
STATION PROGRAMMING (Cont’d) 
Q. Flexible Button Programming 
Programming Steps 
1. Press the REX flexible button (Page 6, Button 
#8). The following message is shown on the 
display phone: 
2 Enter the button information as follows: 
where: BB= Button number (01-l 6) 
l MULTI: To assign a button as a multi-function 
button (user programmable) enter. 
BB [0] HOLD 
. CO UNURINGING: To assign a button as a 
CO tine button, enter: 
BB [l] LL R HOLD 
Lb CO...