Vodavi Starplus 2448ex Hybrid Key Telephone System Installation Manual

Hybrid Key Telephone System STARPLUS@%WEX 
PROGRAM CODE 
BEN FEATURE DEFAULT VALUE 
(after initializina) 
FLASH 21 1 
SMDR 
NO (disabled) 
FLASH 26 
FLASH 27 
FLASH 26 
FLASH 29 
FLASH 30 
FLASH 31 
FLASH 32 
FLASH 33 1 
2 
1 3 
FLASH 34 
FLASH 35 Dedicated Attendant Intercom Path 
Background Music 
Settincr Date and Time 
ISLT Hookswitch Timer 
~ SLT Hookswitch Bounce Timer 
Yes 
Yes 
M/D:1 2 HR 
10 (1 sec.) 
010 msec. 
Voice Mail Outpulsing Tables l-7 
Voice Mail Disconnect Table 6 Disconnect Table is...

sThAPLUS??4l8EX Hybrid Key Telephone System 
--. 
Initialize Data Base Parameters (Cont’d) 
660.2 INITIALIZE CO LINE AlTRIBUTES 
Pfugramming Steps 
If the system is in the programming mode, continue 
using the program codes. lf starting to program here, 
enter&e programming mode. (Refer to Sec. 600.3). 
If CO Line Attributes need to be initialized: 
1. Press FLASH and dial [71]. The following mes- 
sage will be shown on the display phone: Description 
The CO Line parameters may be initialized setting...

Hybrid Key Telephone System 
Initialize Data Base Parameters (Cont’d) 
660.3 INITIALRE STATION AlTRIBUTES 
Programming Steps 
If the system is in the programming mode, continue 
using the program codes. If starting to program here, 
enter the programming mode. (Refer to Sec. 600.3). 
If Station Attributes need to be initialized: 
1. Press flASH and dial [72]. The following mes- 
sage will be shown on the display phone: Description 
The Station parameters may be initialized setting all 
data fields to...

Hybrid Key Telephone System 
FLEX 1 FLEX 2 
FLEX 5 FLEX 6 
FLEX 13 FLEX 14 FLEX 15 FLEX 16 
u 
SPD 
3t THIS BUlTON IS MAPPED AS A LOOP BUlTON ON THE BASIC KEYSET 
Figure 660-l 2448EX Default Button Mapping 
Issue 3, August 1991 
660-6  

Hybrid Key Telephone System 
Initialize Data Base Parameters (Cont’d) 
660.4 INITIALQE EXCEPTION TABLES 
Programming Steps 
If the system is in the programming mode, continue 
using the program codes. If starting to program here, 
enter the programming mode. (Refer to Sec. 600.3). 
If Exception Tables need to be initialized: 
I. Press FLASH and dial [73]. The following mes- 
sage will be shown on the display phone: Description 
The Exception Table parameters including the Al- 
tow/Deny Tables and the...

lnitiallre Data Base Parameters (Cont’d) 
660.5 lNlllAUZE SYSTEM SPEED 
Programming Steps 
Description 
If the system is in the programming mode, continue 
using the program codes. If starting to program here, 
enter the programming mode. (Refer to Sec. 600.3). 
If System Speed bins need to be initialiied: 
1. Press FLASH and dial [74]. The following mes- 
sage will be shown on the display phone: Numbers entered into the System Speed dial Table 
may be Waked clearing all bins to their original, 
default...

. 
Hybrid Key Telephone System %ARPLUS%448~ 
Initialize Data Base Parameters (Cont’d) 
660.6 INITlALlZE LCR TABLES 
Programming Steps Description 
If the system is in the programming mode, continue The LCR Tables may be initialized setting all tables 
using the program codes. If starting to program here, to their original, default values. The following tables 
enter the programming mode. (Refer to Sec. 600.3). will be reset to their original default value after initiali- 
If LCR Tables need to be...

STARPLUS@ 2446EX 
Hybrid Key Telephone System 
SECTION 670 
SYSTEM DATA BASE PRINTOUTS 
670.1 PRINT ENTIRE SYSTEM DATA BASE 
Programming Steps 
If the system is in the programming mode, continue 
using program codes. If starting to program here 
enter the programming mode 
first (refer to paragraph 
600.3). 
If a complete printout of the entire data base is 
desired: 
1. Press FLASH 
and dial [80]. The following mes- 
sage will be shown on the display of a display 
phone: 
2. To print the entire data...

A Hybrid Key Telephone System wARPLUS@ 2448EX 
System Data 
Base Printouts (Cont’d) 
670.2 SYSTEM PARAMETERS 
Programming Steps 
If the system is in the programming mode, continue 
using program codes. If starting to program here 
enter the programming mode first (refer to paragraph 
600.3). 
If a printout of all System Parameters is desired: 
1. Press FLASH and dial [81]. The following mes- 
sage will be shown on the display of a display 
phone: 
2. To print the system parameter data base, press 
the...

t 
1 ~AAPLUS@ 2448EX 
Hybrid Key Telephone System 
I HFT HFD DAC HPR PRI ENR 
10 10 100 SYS Y N 
1 90R INT BGM LCR PWT 
Y Y Y N Y 
i WIENDANT STATIONS 
10 ## Pi 
I ;OUD BELL ASSIGNMENTS 
### C## 
?BX DIALING CODES 
I# C# II# #I ## 
ZECUTIWUSECRETARY PAIRINGS 
. = 
! = 
z: 
f i 
I = 
: = 
ii d;: 
;;ALT OVRANO STN# 
I91 
192 
193 
194 
‘95  E 
E 
a 
8 
I 8 
8 
UN 
R 
96 
97 
CD TIMERS 
ING MIT OVER 
60 60 60 
Data Base Printout 
Desctiption 
7A MONITOR Eng. Ver. l.lf 
DATE: 07/24/91 TIME: 14:10:43 
ENTER...