Vodavi Starplus 2448ex Hybrid Key Telephone System Installation Manual

sTARPLUS@ 2448EX 
Hybrid Key Telephone System 
SYSTEM PARAMETERS (Cont’d) 
610.23 LCR ENABLE 
Programming Steps 
If this feature is to be assigned: 
A Press FLASH and dial [23]. The following mes- 
sage is shown on the display phone: 
B. The top left button of the flexible button field will 
toggle on and off: 
l LED on =yes 
l LEDoff=. 
C. Press HOLD button. 
619.24 DISA ACCESS CODE 
Programming Steps 
If this feature is to be assigned: 
A Press FLASH and dial [24]. The following mes- 
sage is shown on...

-“--HytirWKey~re~one System =ARPLUS* 2446EIt 
SYSTEM PARAMETERS (Cont’d) 
610.26 PHONE BOX RING TIMER 
Programming Steps 
If this timer is to be changed: 
A Press PUSH and dial [251. The following mes- 
sage is shown on the display phone: Description 
Determines the amount of time a station with a DSS 
button for a particular phone box will ring when the 
phone box user presses the CALL button. 
Default: Default is 20 seconds and is variable from 
00 to 60 seconds. A 00 entry will cause programmed...

sTARPLUS@ 2448EX Hybrid Key Telephone System 
SYSTEM PARAMETERS (Cont’d) 
610.27 MUSIC CHANNEL 
Programming Steps 
If Background Music is to be enablecVdiiled: 
A Press RASH and dial [27j. The following mes- 
sage is shown on the display phone: 
B. Enter one digit on the dial pad. 
l LED on = Background Music 
l LED off = No Background Music 
610.28 SEITING SYSTEM TIME AND DATE 
Prooramming Steps 
To set the time and date which appears on display 
Key Telephones: 
A Press RASH and dial [26]. 
B. Choose...

HybtWKciilephoneSystem =ARPLUS* 2448m 
SYSTEM PARAMETERS (Cont’d) 
610.29 SLT HOOKSWITCH TIMER 
Programming Steps 
If this timer is to be changed: 
A Press FLASH and dial [29]. The following mes- 
sage is shown on the display phone: 
B. Enter a two digit number on the dial pad. 
C. Press HOLD button. 
c 
610.30 SLT HOOKSWITCH BOUNCE TIMER 
Prooramminq Steps 
If this timer is to be changed: 
A Press FLASH and dial [30]. The following mes- 
sage is shown on the display phone: 
B. Enter a three digit number...

sTARPLUS@ 2448EX Hybrid Key Telephone System 
SYSTEM PARAMETERS (Cont’d) 
610.31 PAGE WARNING TONE 
Programming Steps 
If this feature is to be changed: 
A Press PUSH and dial [31]. The following mes- 
sage is shown on the display phone: 
B. Toggle the top left button in the flexible button 
field on 
or off: 
l LEDon =yes 
l LEDoff=no 
C. Press HOLD button. 
610.32 ATTENDANT RECALL TIMER 
Programming Steps 
If this timer is to be changed: 
A Press FLASH and dial [32]. The following mes- 
sage is shown...

--- Hybrid Key Telephone System sTARPLUS@ 2448EX 
SYSTEM PARAMETERS (Cont’d) 
610.33 UCD TIMERS 
Programming Steps 
If UCD timers are to be 
changed: 
A. Press FLASH and dial [33]. The following mes- 
sage is shown on the display phone: Description 
Three timers for UCD operation are programmable 
on a system-wide basis. The UCD timers include: A 
Ring Timer, Message interval Timer, and an Cver- 
flow Timer. Each timer is described below: 
Related Programming: UCD Group Assignments: 
Announcement Table...

sTARPLUS@ 2448EX Hybtid Key Telephone System 
UCD TIMERS (Cont’d) 
C. UCD OverfIow Timer 
Programming Steps 
To make a change to the UCD Cverfiow Timer: 
1. Press the OVR flexible button (Button #3). 
2 
Enter the thre&igit value on the dial pad which 
corresponds to 000-600 seconds. 
3. Press HOLD button. Display will now update. Description 
The UCD Overflow Timer determines the total length 
of time a caller will remain in queue for a particular 
UCD group. When the timer expires, the caller will 
be...

- --HybrtdKizy~lGjpnone System sTARPLUS@ 2448EX 
SYSTEM PARAMETERS (Cont’d) 
610.34 ANNCUNCEMENT TABLES 
Programming Steps 
Description 
If Recorded Announcement devices are installed to 
operate with UCD, these tables must be pro- 
grammed: 
A. Press FLASH and dial [34]. The following mes- 
sage is shown on the display phone: Determines the type, index (port) number and mes- 
sage length for the two available Recorded An- 
nouncements (RAN). There are two RAN tables that 
can be programmed. Table 1 can...

-. 
sTARPLUS@ 2448Ex 
SYSTEM PARAMETERS (Cont’d) 
610.35 CALL FORWARD NO ANSWER TIMER 
Programming Steps 
If this timer is to be changed: 
A. Press FLASH and dial [351. The following mes- 
sage is shown on the display phone: 
B. Enter three-digit timer value on the dial pad 
which corresponds to 000-600 seconds. 
C. Press HOLD button. Hybrid Key Telephone System 
Description 
The Call Forward No answer timer is used when a 
station in the system specifies that Lho answef calls 
be forwarded to another...

-- flyb2ifKey Telephone System sTARPLUS@ 2448u( 
610.36 VOICE MAIL GROUPS 
A. Voice Mail Programming 
Programming Steps 
If Voice Mail Groups are to be programmed: 
1. Press FLASH and dial [36]. The following mes- 
sage is shown on the display phone. 
Where: 
g= voice mail group number (O-7) 
AAA= alternate group (690-697) 
L= “Leave” mail index from outpulsing table 
for leaving messages (O-7) 
R= “Retrieve” mail index from outpulsing 
table for retrieving messages (O-7) 
XX= voice mail station numbers...