Vodavi Starplus 2448ex Hybrid Key Telephone System Installation Manual

~ARPLUS@ 2448EX Hybrid Key Telephone System 
1 
SYSTEM PARAMETERS (Cont’d) 
610.9 PAGING TlMEOUT TlMER 
Programming Steps 
If this timer is to be changed: 
A. Press PUSH and dial [09]. The following mes- 
sage is shown on the display phone: Description 
Determines the maximum length of a page an- 
nouncement (internal, external or All Call). The sys- 
tern will automatically disconnect the page at the end 
of this time unless the person making the page has 
already hung up. 
Default: Default is 15...

Hybrid Key Telephone System sARPLUS@ 2448EX 
SYSTEM PARAMETERS (Cont’d) 
610.11 HOLD PREFERENCE 
Programming Steps 
If this feature is to be changed: 
A Press FLASH and dial [I I]. The following mes- 
sage is shown on the display phone: 
B. To make a change, press the top left button in 
the flexible button field. It will toggle on and off 
with each depression. 
l LED off = Exclusive Hold 
l LEDon =SystemHold 
C. Press HOLD button. 
610.12 AUTOMATIC PRIVACY 
Programming Steps 
If this feature is to be...

sTARPLUS@ 2448EX 
Hybrid Key Telephone System 
SYSTEM PARAMETERS (Cont’d) 
610.13 EXTERNAL NIGHT RING 
Programming Steps 
If this feature is to be changed: 
A Press RASH and dial [13]. The following mes- 
sage is shown on the display phone: 
6. To make 
a change, press the top left button in 
ttre flexible button field. tt will toggle on and off 
with each depression. 
. LEDoff-no 
l LED on = yes 
C. Press HOLD button. 
610.14 AlTENDANT OVERRIDE 
Prooramming Steps 
If this feature is to be changed: 
A...

.- 
! Hybrid Key Telephone System sTARPLUS@ 2448EX 
SYSTEM PARAMETERS (Cont’d) 
610.15 A-ITENDANT STATION 
Programming Steps 
If Attendant Stations are to be changed: 
A. Press FLASH and dial [15]. The following mes- 
sage is shown on the display phone: 
B. Enter up to three (3) two-digit station number(s) 
on the dial pad. 
C. Press HOLD button. 
610.16 LOUD BELL CONTROL 
Programming Steps 
If this feature is to be assigned: 
A. Press RASH and dial [16]. The following mes- 
sage is shown on the display...

STARPLUS@ 2448EX 
Hybrid Key Telephone System 
SYSTEM PARAMETERS (Cont’d) 
610.17 PBX DIAIJNG CODES 
Programming Steps 
If PBX Dialing Codes are to be assigned: 
A Press FLASH and dial [I 7j. The following mes- 
sage is shown on the display phone: Description 
Five one or two-digit PBX access codes can tie 
programmed into memory. When dialed, these 
codes signal the system so that toll restriction is 
applied at the next dialed digit. When a single digit 
be followed by the pound 
To delete an entry,...

Hybrid Key Telephone System sTARPLUS@ 2446EX 
610.19 UNIFORM CALL DISTRIBUTION (UCD) 
A. UCD Group Programming 
Programming Steps 
If UCD Groups are to be assigned: 
1. Press RASH and dial [19]. The following mes- 
sage is shown on the display phone: 
Where: 
AAA= Attemate UCD Group Assignment 
BBB= UCD Overflow Assignment 
#//I= UCD Station(s) Assignment(s) --- - 
2. The top left button’in the flexible button field will 
be lit for programming UCD group 890. To 
change UCD groups or enter further UCD...

*AFtPLUS@ 2448EX Hybrid Key Telephone System 
UNIFORM CAU DiSTRiBUTiON (Cont’d) 
C. Overflow Station Assignment 
Programming Steps 
To program UCD Overflow station: 
1. Press the OVR flexible button (Button MO). 
2. Enter the three-digit station number (10 to 57) 
to designate the UCD Groups overflow station. 
3. Press the HOLD button to enter the data. 
D. UCD Station Assignment(s) 
Programming Steps 
To program stations into a UCD group: 
1. 
2. 
I 
3. 
Press the STA flexible button (Button #1 1)....

Hybrid Key Telephone System STARPLUS@ 2448EX 
610.20 STATION MESSAGE DETAIL RE- 
CORDING (SMDR) 
A. SMDR Programming 
Programming Steps 
If Station Message Detail Recording is to be used: 
1. Press FLASH and dial [20]. The following mes- 
sage is shown on the display phone: 
To program SMDR features, use the flexible 
button(s) as defined in the following proce 
dures. 
The SMDR, TYPE, PRINT, and ACC buttons 
toggle on and off. 
After all entries are made, press the HOLD 
button to accept the data. 
B.’...

sTARPLUS@ 2448EX Hybrid Key Telephone System 
STATION MESSAGE DETAIL RECORDING 
(Cont’d) 
D. Character Print Assignment 
Prograrnminq Steps 
1. Press PRINT flexible button (Button #3) to de- 
termine the print format of SMDR records. 
l LED ON = 80 Charader is enabled 
l LED OFF = 29 Character is enabled 
2. Press HOLD button to accept the data. Description 
The system can be programmed to print indiiicfual 
SMDR records in either a 1 -line 80 character format 
or a 34ine 28 character format. 
Default:...

Hybrid Key T818phOn8 astern 
SARPLUS@ 2446EX 
SYSTEM PARAMETERS (Cont’d) 
610.21 SET ADMIN. PASSWORD 
Programming Steps 
If this feature is to be assigned: 
A Press FLASH and dial [21]. The following mes- 
sage is shown on the display phone: 
6. Enter four digits between 0000 and 9999. 
C. Press HOLD button. 
610.22 DIAL PULSE PARAMETERS 
Programming Steps 
If this feature is to be assigned: 
A Press FLASH and dial [22]. The following mes- 
sage is shown on the display phone: 
B. To program dial pulse...