Vodavi Infinite Dvx Iii Hybrid Key Telephone System Installation Manual

infkiteTM DVX I’Digital Key Telephone System
UNIFORM CALL DISTRIBUTION (UCD)
UNIFORM CALL DISTRIBUTION (Cont’d)
750.3UCD RAN ANNOUNCEMENT TA-
BLES
Programming StepsIf Recorded Announcement devices are in-
stalled to operate with UCD, these tables mustbe programmed:
a. Press FLASH and dial 
[62]. The following
message is shown on the display phone:
b.The top left button in the flexible button
field will be lit for programming UCD RAN
Announcement Table 1. To change to UCD
RAN Announcement Table 2, press...

infznitem DVK I’Digital Key Telephone System
TABLE OF CONTENTS FOR SECTION 755
SECTION 755
755.1755.2
755.3VOICE MAIL GROUPS 
(VM)..........................................................755-l
VOICE MAIL PROGRAMMING
..............................................................
.755- 1A. Alternate Voice Mail Group
.......................................................
.755-2
B.“Leave” Mail Index Entry............................................................755-2
C.“Retrieve” Mail Index...

infhitem DVX I’Digital Key Telephone System
VOICE MAIL GROUPS 
(WI)
SECTION 755VOICE MAIL GROUPS 
(VM)755.1VOICE MAIL PROGRAMMING
Programming StepsIf the system is in the programming mode,
continue using the program codes. If starting toprogram here, enter the programming mode.
Refer to Sec. 700.2, Program Mode Entry (Key
Station).
If Voice Mail Groups are to be programmed:1. Press FLASH and dial 
1651. The following
message is shown on the display phone.
Where:
- G = Voice Mail group number (O-7)
- AAA...

VOICE MAZ GROUPS (VM)
in.nitem DVX ‘JJDigital Key Telephone System
VOICE MAIL GROUPS (Cont’d)
A.Alternate Voice Mail Group
Programming Steps
To program an alternate group:
1.Press the ALTERNATE VM GP flexible but-ton (Button 
#9).
2.Enter the three-digit pilot number (440 to447) of the desired group.
3.Press the HOLD button to save the entry.Confirmation tone is heard and the dis-
play will now update.
B.“Leave” Mail Index Entry
Programming StepsTo specify the “Leave” mail index (outpulsing
table) to be...

inflnitem DVX I’Digital Key Telephone System
VOICE 
lvIAIL GROUPS (VM)VOICE MAIL GROUPS (Cont’d)
C.“Retrieve” Mail Index Entry
Programming StepsTo program the “Retrieve” mail index 
(out-pulsing table) to be accessed by the Voice Mail
group:
1.Press the RETRIEVE flexible button (But-
ton 
#ll).
2.Enter the one-digit outpulsing table num-ber (O-7) on the dial pad.
3.Press the HOLD button to save the entry.Confirmation tone is heard and the dis-
play will now update.
D. Station Assignment(s)
Programming...

VOICE MAIL GROUPS (VM)
infznite” DVX I’Digital Key Telephone System
VOICE MAIL GROUPS (Cont’d)
755.2VOICE MAIL OUTPULSING 
TABLEA.Voice Mail In-Band Signaling
Programming Steps
If Voice Mail In-Band signaling is to be used:
1.Press FLASH and dial [66]. The following
message is shown on the display phone.
Where:
- y = Table index (O-7)
- x = Entered digits (O-9, #, *, Pauses)
2.The TABLE 00 flexible button (Button # 1)led is lit. To change tables, press the ap-
propriate flexible button (Buttons 2-8)
and...

iq.fMte” DVK I’Digital Key Telephone SystemVOICE MAIL GROUPS 
(VM)VOICE MAIL GROUPS (Cont’d)
VOICE MAIL OUTPULSING TABLE (Cont’d)
B.Voice Mail DiSCOMCCt Table
Programming Steps
1.Press the DISCONNECT TABLE 8 flexible
button (Button #9). This is the table num-ber used for the Voice Mail disconnect
signal.
2.Enter up to la-digits which will be used
for the disconnect signal, including ‘x’ and
‘#‘. TRANS button = pause.
3.Press the HOLD button to save the entry.Confirmation tone is heard and the dis-
play...

VOICE MAIL GROUPS (VM)
infinitem DVX I’Digital Key Telephone System
VOICE MAIL GROUPS (Cont’d)
755.3VOICE MAIL IN-BAND FEATURES
Programming Steps
1.Press FLASH and dial [67]. The following
message will be shown on the display:DescriptionA.Voice Mail In-Band Digits
F?-ogramming Steps
If Voice Mail In-Band Digits are to be enabled
or disabled for Incoming CO callers:1. Press the INCOMING ID DIGITS flexible
button (Button # 1). It will toggle on and off
with each depression.l LED on = ID digits are enabled...

infhitem DVK I’Digital Key Telephone System
VOICE MAIL GROUPS 
(VMJVOICE MAIL GROUPS (Cont’d)
VOICE MAIL IN-BAND FEATURES (Cont’d)
B. Voice 
Mail Transfer/Forward
FYogramming StepsDescriptionIf Voice Mail Call Forward is to be enabled or
disabled for Incoming CO callers:
1.Press the CALL FWD flexible button (But-
ton 
#2). It will toggle on and off with each
depression.l LED on = Call Forward is enabled
l LED off = Call Forward is disabledThis feature allows Voice Mail calls, upon
reaching a forwarded to...

inQ’initew DVX I’Digital Key Telephone System
SECTION 760
760.1
760.2760.3TABLE OF CONTENTS FOR SECTION 760
EXCEPTION TABLES PROGRAMMING
.......................................760-l
EXCEPTION TABLES PROGRAMMING
.................................................
.760- 1RELATED ITEMS TO TOLL RESTRICTION............................................
.760-2A. CO/PBX Lines
..........................................................................
.760-2
B.Forced Account Codes...