Vodavi Infinite Dvx Iii Hybrid Key Telephone System Installation Manual

in..nitem DVX I’ICLID PROGRAMMINGDigital Key Telephone System
ICLID PROGRAMMING (Cont’d)
ICLID Ringing Assignment(s) 
(Co&d)
Programming StepsRing assignments will be continuous and will
be displayed in order of the destination numberfrom 001 to 557.
5.Repeat Step 3 to program additional sta-
tions and ringing assignments. A maxi-
mum of eight stations will display on the
LCD display. Additional stations and ring-ing assignments can be displayed using
Button # 17.
To advance to the next Route:1. Press...

infznitem DVX I’Digital Key Telephone System
ICLID PROGRAMMING
ICLID PROGRAMMING (Cont’d)
740.3ICLlD FEATURES
Programming Steps
If ICLID is to be used:
1.Press FLASH and dial [56]. The following
message is shown on the display phone:2. To program ICLID features, use the flex-
ible button(s) as defined in the following
procedures. The ICLID, NAME buttons
toggle on and off.
3.After all entries are made, press the HOLDbutton to accept the data.
A. Enable/Disable
Prograrmning Steps
1. Press the ICLID ENABLE...

ICLID PROGRAMMINGin.nitem DVX ILIDigital Key Telephone System
ICLID 
PROGRAMMING (Cont’d)
ICLID Features (Cont’d)
Programming StepsC. Baud Rate Display
The ICLID Baud Rate is programmed usingFlash 15 Baud Rate Assignments. Button
#3 will return error tone when pressed. TheLCD displays the current baud rate based
on which Port number is assigned to the
ICLID Port number.Description
The 
infinite Digital Key Telephone Systems canreceive ICLID input on the standard RS-232C
“On-Board” connector (future) on...

I.-I.;- _SECTION 745
745.1
745.2
745.3
745.4
745.5
infGzitem DVX I’Digital Key Telephone System
TABLE OF CONTENTS FOR SECTION 745
AUTOMATIC CALL DISTRIBUTION (ACD)
...................................745-l
ACDGROUP PROGRAMMING...............................................................745- 1
A.Alternate ACD Group Assignment.............................................
.745-2
B.ACD Overflow Station Assignment..............................................745-2
C.ACD Recorded Announcement Assignment(s)...

infxnitem DVK I’Digital Key Telephone System
AUTOMATIC CALL DISTRIBUTION (ACD)
SECTION 745
AUTOMATIC CALL DISTRIBUTION (ACD)
745.1ACD GROUP PROGRAMMING
Programming StepsIf the system is in the programming mode,
continue using the program codes. If starting toprogram here, enter the programming mode.
Refer to Sec. 700.2, Program Mode Entry (Key
Station).If ACD Groups are to be assigned:
1.Press FLASH and dial [60]. The following
message is shown on the display phone:
Where:
- 5XX = ACD Group Number...

AUTOMATIC CALL DISTRIBUTION (ACD)infinitem DVX I’Digital Key Telephone System
AUTOMATIC CALL DISTRIBUTION (Cont’d)
A.Alternate ACD Group Assignment
Programming Steps
To program an alternate group:
1.Press the ALTERNATE ACD GROUP flex-
ible button (Button 
#9).
2.Enter the three-digit pilot number (550 to
557) of the desired alternate ACD group.
3.Press the HOLD button to save the entry.Confirmation tone is heard and the dis-
play will now update.
B.ACD 
Overflow Station Assignment
Programming StepsTo...

intnitem DVX I’Digital Key Telephone SystemAUTOMATIC CALL DISTRIBUTION (ACD)
AUTOMATIC CALL DISTRIBUTION (Cont’d)
C. ACD Recorded Announcement
Assignment(s) (RAN)
Programming Steps
To program a Recorded Announcement:
1.Press the ANNOUNCEMENTTBIS flexible
button (Button # 11).
2.Enter a three-digit sequence:
- 1st Digit = Guaranteed Message.
- 2nd Digit = RAN port specified for pri-
mary message.
- 3rd Digit =RAN port specified for secon-
dary message.3. Press the pound 
[#I key once as the 1st
digit if...

AUTOMATIC CALL DISTRIBUTION (ACD)infznite” DVX I’Digital Key Telephone System
AUTOMATIC CALL DISTRIBUTION (Cont’d)
D. ACD Supervisor Programming
Programming StepsTo program an ACD Supervisor:
1.Press the ACD SUPV flexible button (But-
ton # 12.2. Enter the three-digit station number of
the desired ACD Supervisor station.
3.Press the HOLD button to save the entry.Confirmation tone is heard and the dis-
play will now update.
DescriptionACD SUPERVISOR. The ACD Supervisor Sta-
tion assignment feature...

infinitem DVX I’Digital Key Telephone System
AUTOMATIC CALL DISTRIBUTION 
(ACD)AUTOMATIC CALL DISTRIBUTION (Cont’d)
E. ACD Station Assignment(s)
Programming StepsTo program stations into a ACD group:
1.Press the Page “B” flexible button (Button
# 19). The following message is shown on
the display phone.
Where:
- 5XX = ACD Group Number (550-557)
- B = Page “B” parameters
- ### = ACD Station assignments
2. The top left button in the flexible button
field will be lit for programming ACD group
1 (550).To...

AUTOMATIC CALL DISTRIBUTION (ACD)in.niteTM DVX IIJDigital Key Telephone System
AUTOMATIC CALL DISTRIBUTION (Cont’d)
745.2ACD 
TIlvlERS
Programming Steps
If ACD timers are to be changed:a. Press FLASH and dial 
(6 1). The following
message is shown on the display phone:
A ACD Ring Timer
Programming Steps
To make a change to the ACD Ring Timer:1. Press the RING TIMER flexible button
(Button # 1). The following message is
shown on the display phone:
2. Enter the three-digit timer value on the
dial pad which...