Vodavi Infinite Dvx Iii Hybrid Key Telephone System Installation Manual

infmitew DVX I’
Digital Key Telephone System
EXCEPTION TABLES PROGRAMMlNG
SECTION 760EXCEPTION TABLES 
PROGRANIMING760.1EXCEPTION TABLES PROGRAM-
MING
Rrogramming Steps
The 
tiJ?nite Digital Key Telephone System offersa flexible means of applying toll restriction to
stations or individuals. Dialing privileges (or toll
restriction) is determined through assignmentof station and CO line Class Of Service (COS).
Several types of restriction can be derived sim-ply by programming COS assignments and CO
line...

EXCEPTION TABLES PROGRAMMINGin..nitem DVX I’Digital Key Telephone System
760.2RELATED ITEMS TO TOLL 
RE-Table 760-2 Allow/Deny Toll Table
-
-R
U
LE
1R
U
LE
2R
U
LE
3R
U
LE
4ALLOW
TABLE
NO
ENTRIEE
ENTRIES
NO
ENTRIES
ENTRIES
iDENY
TABLE
NO
ENTRIES
NO
ENTRIES
ENTRIES
ENTRIESALLOWFOUND A
NOTFOUNDDFOUND D
NOTFOUNDA
FOUND
Nm !*~FZZD(_!I  ,I  I
A special “Don’t Care” 
(“D”) character may be
entered as a digit to either allow or deny any
digit dialed in that digit sequence. For examplea code 
11 “D” 01 and 11...

infhitem DVX I’Digital Key Telephone SystemEXCEPTION TABLES PROGRAMMING
striction may inhibit dialing by SLT sta-
tions. 
TWO options are available to help
alleviate this problem; 1) shorten the SLTreceiver timer (refer to Sec. 710.1, SLT
DTMF Receiver timer). This will free up
DTMF receivers faster, however, may not
provide the desired toll restriction for SLTstations; or 2) Enable 
LCR and force LCRon SLT stations. When the 
LCR database
is set up the 3-digit table allows for entry
of the number of...

EXCEPTION TABLES PROGRAMMINGinfinitem DVX InDigital Key Telephone System
760.3TOLL RESTRICTION PROGRAM-
MING
kEntering Toll Table Programming
Programming StepsIf the system is in the programming mode,
continue using the program codes. If starting toprogram here, enter the programming mode.
Refer to Sec. 700.2, Program Mode Entry (Key
Station).It is recommended that the Exception
Tables be initialized prior 
to entering data
into the tables. Do this by following the
instfuctions in Sec. 700.5,...

infxnitem DVX InDigital Key Telephone SystemEXCEPTION TABLES PROGRAMMING
EXCEPTION TABLES PROGRAMMING
(Cont’d)
B. Allow Table Programming
Programming Steps1. Press the ALLOW TABLE A or ALLOW
TABLE B flexible button (Button # 1 or #3).The following message is shown on the
display telephone:/ALLOW TABLE A
The first two bins locations are displayed.
2.Enter the two-digit bin number (01-20) of
the bin to be programmed.It is recommended that: Bin 17 
be teservedfor an t?ntrg that will reference speciaZ...

EXCEPTION TABLES PROGRAMMINGinJinitew DVX I’Digital Key Telephone System
EXCEPTION TABLES PROGRAMMING
(Cont’d)
Atlow Table Programming (Cont’d)
Programming Steps
- XXX = Area code (must match AREA-X
en-1
- DDD = “Don’t Care” digit (three entries,
DND button)
- {S)= Search Special Table Command
(TRANS button)
2.For an entry that is to reference the Home
Area Code table (special table 4) the entry
may also be entered to expect or not expect
a leading digit 
[l]. In fact in some cases itmay be desirable to...

infxnite” DVX I’Digital Key Telephone System
EXCEPTION TABLES PROGRAMMING
EXCEPTION 
TABLES PROGRAMMING
(Cont’d)
C. Deny Table Programming
Programming Steps
1.Press the DENY TABLE A or DENY TABLE
B flexible button (Button 
#2 or #4). The
following message is shown on the display
phone:
The first two bin locations are displayed.
2.Enter the two-digit bin number (01-10) of
the bin to be programmed.
3.Enter the deny code:
where:
- oto9,*, # = corresponding deny digits
(numbers)
- MUTE = Don’t Care digit...

infinitem DVX III
EXCEPTION TABLES PROGRAMMING
Digital Key Telephone System
EXCEPTION TABLES 
PROGRAMMlNG(Cont’d)
D. Special Table Programming
Programming Steps
To program a special table, it is first necessaryto assign an area code to the table (except for
the home area code).
To assign an area code to a special table:
1.Press the appropriate AREA CODE TABLE
(1-4) flexible button (button 
#9- 11). The
following message is shown on the display
phone:
2.Enter the three-digit area code.
3.Press the HOLD...

inftnitem DVX I’Digital Key Telephone System
EXCEPTION TABLES 
PROG-GEXCEPTION TABLES 
PROGIUMMING(Cont’d)
E.Displaying Toll Table Entries
Programming StepsTo display entries in either the Allow/Deny
tables or the special tables:1. Press the DISPLAY TABLES flexible but-
ton (button 
#12) while entering informa-
tion into a table.
2.While viewing entries made into an allow
or deny table, two entries at a time will bedisplayed on the bottom line of the dis-
play. By pressing the DISPLAY TABLES
button...

infmitem DVX I’
Digitd Key Telephone System
TABLE OF CONTENTS FOR SECTION 765
SECTION 765
765.1765.2LEASTCOSTROUTING
&CR)PROGRAMMING.........................765- 1
INTRODUCTION....................................................................................765- 1A. LCR Operation..........................................................................
.765- 1LCR TABLES 
PROGRAMMlNG...............................................................765-4
A.3-Digit Area/Office Code...