Vodavi Infinite Dvx Iii Hybrid Key Telephone System Installation Manual

INITIALIZE DATABASE PARAMETERSin.nite’“l DVK I’
DigitaI Key Telephone System
cl1
GHIcl4
PRScl
7ABC
cl
DEF2
cl3
JKLclMN05
cl
6OPER
cl
0Figure 770-2 
&Button Default Button Mapping
770-8
Issue 1, February 1994 

infznitem DVX I’
Digital Key Telephone System
INITIALIZE DATABASE PARAMETERS
INIT. DATABASE PARAMETERS (Cont’d)
D.Initialize Station and CO Port
Parameters
Programming Steps
If Group Parameters need to be initialized:1. Press the Station/CO Port 
Parametersflexible button (Button 
#4). The following
message will be shown on the 
display
phone:Description
Station and CO Port parameters may be 
initial-
ized setting all stations and all CO Lines back
to their original, default values. The following
data...

INITIALIZE DATABASE PARAMETERSinfinitem DVX I’Digital Key Telephone System
INIT. DATABASE PARAMETERS (Cont’d)
E. Initialize Exception Tables
Programming Steps
If Exception Tables need to be initialized:
1.Press the Exception Tables flexible button
(Button 
#5). The following message will beshown on the display phone:
2. To initialize the Exception Tables, press
the HOLD button. Confirmation tone will
be heard.Description
The Exception Table parameters including the
Allow/Deny Tables and the Special...

infhite” DVX I’Digital Key Telephone System
INITIALIZE DATABASE PARAMETERS
INIT. DATABASE PARAMETERS (Cont’d)
F.InitiaIize System Speed Numbers
Programming Steps
If System Speed bins need to be initialized:
1. Press the System Speed flexible button
(Button #6). The following message will beshown on the display phone:
DescriptionNumbers entered into the System Speed dial
Table may be initialized clearing all bins to theiroriginal, default value (empty). All bins 20
through 99 are cleared returning to...

INITIALIZE DATABASE PARAMETERSinfinite’l” DVK I’Digital Key Telephone System
INIT. DATABASE PARAMETERS (Cont’d)
G. Initialize LCR Tables
Programming StepsDescription
If 
LCRTables need to be initialized:The LCR Tables may be initialized setting all
1.Press the LCR Tables flexible button (But-tables to their original, default values. The fol-ton 
#7). The following message will belowing tables will be reset to their original de-shown on the display phone:
fault value after initialization of the LCR...

infkitem DVX I’
Digital Key Telephone System
INITIALIZE DATABASE PARAMETERS
INIT. DATABASE PARAMETERS (Cont’d)
H.
InitiaIize System Database and Reset
(all parameters)
Programming Steps
Description
If System needs to be initialized:
1.Press the System and Reset flexible button
(Button 
#S) . The following message will beshown on the display phone:
2. To initialize the entire system database,
press the HOLD button. The system will
perform a hard reset.To completely initialize the database area in-
cluding...

INITIALIZE DATABASE PARAMETERSinfiniteTM DVX I’Digital Key Telephone System
INIT. DATABASE PARAMETERS (Cont’d)
I.Initialize ICLID Parameters
Programming Steps
If the ICLID* Table(s) need to be initialized:Description
The ICLID Table parameters may be initialized1. Press the ICLID* TABLE flexible button
(Button #9). The following message will beshown on the display phone:setting all data fields to their original, defaultvalues.
2.To initialize the ICLID* Table(s), press theHOLD button. Confirmation tone...

infznite” DVX I’Digital Key Telephone System
INIT. DATABASE PARAMET
ERS (Cont’d)INITIALIZE DATABASE PARAMETERS
J.Initialize Directory Dialing Table
Parameters
Programming Steps
If Directory Dialing Table Parameters need to be
initialized:
1.Press the Directory Dialing Table Parame-ters flexible button (Button 
# 10). The fol-
lowing message will be shown on the
display phone:
Descrintion
The Directory Dialing Table parameters may be
initialized setting all data fields to their original,
default values.2....

injinitem DVX I’
IlVfITIALIZE DATABASE PARAMETERS
IN-IT. DATABASE PARAMETERS (Cont’d)
K. Initialize Hunt Group Parameters
Programming Steps
If Group Parameters need to be initialized:
1.Press the Hunt Group Parameters flexiblebutton (Button 
#l 1). The following mes-
sage will be shown on the display phone:
Digital Key Telephone System
Description
Hunt Group parameters may be initialized 
set-ting all data fields to their original, default
values,2. To initialize the Hunt Group parameters,
press the HOLD...

infInite” DVX I’
Digital Key Telephone SystemINITIALIZE DATABASE PARAMETERS
INIT. DATABASE 
PARAMETERS (Cont’d)
L.Ix&.ialize ACD or UCD Group
Parameters
Programming StepsDescriptionIf ACD* or UCD Group Parameters need to be
initialized:
1.Press the ACD* or UCD Group Parameters
flexible button (Button 
# 12). The followingmessage will be shown on the display
phone:ACD* or UCD Group parameters may be initialized setting 
all data fields to their original,
default values.2. To initialize the ACD* or UCD...