ViewSonic Pjl6243 Projector User Manual

65ViewSonic PJL6243
65
	 The	image	is	distorted	or	runs	off.	– Check PC adjust menu or Screen menu and adjust them.          See pages 30-31, 34-35.
 PIN code dialog box appears  – PIN code lock is being set. Enter a PIN code (the “1234” or numbe\
rs    at start-up .   you have set). See pages 19, 53-54.
	 The	Remote	Control	does  – Check the batteries.  not work .  – Make sure no obstruction is between the projector and remote     control.     – Make sure you are not too far from the projector when...

66ViewSonic PJL6243
66
Appendix
Menu	Tree
Computer	Input/Video	Input
VolumeMuteOn/OffSound0-63
RGB Component
S-videoRGB
RGB (Scart)
Input
Video
Computer 1
Computer 2
MICOn/OffMIC gain0-63Standby MIC outOn/Off
Dynamic
CinemaBlackboard (Green)
Image 1
Image selectStandard
ColorboardRed/Blue/Yellow/Green
Image 4
Real
InformationInput Source Information Display
LanguageSetting20 languages provided.
Blue/User/BlackOff /OnLogo select
Ready
On/Off
Code 1–Code 2
BackgroundDisplayLogo
Power management
Direct on...

67ViewSonic PJL6243
67
AutoPA LSECAMNTSCNTSC 4.43PAL-MPAL-N
Video Input
Auto1080i1035i720p576p480p576i480i
0–630–63
Off
System (2)
System (3)
Image AdjustContrastBrightnessColorTint
RedGreenBlueSharpness
ResetStore
Gamma
Progressive
0–630–630–630–15 0–15
Image 1
Screen
Yes/No
OffNoise reductionL1L2
0–630–63
Image 4
L2L1
Film
Color temp.
Scale
Reset
H/V
H/VYes/NoYes/No
Custom adj.On/OffH&V
MidLowXLow
UserHigh
PositionCommon
IrisOff/On
SVGA 1Mode 1Mode 2 - - - -
Total dotsHorizontalVertical
Display area...

68ViewSonic PJL6243
68
Check  the  indicators  for  projector  condition.                                   
• • • green.• • • red• • • off
• • • blinks green.
 When the projection lamp reaches its end of life, the LAMP REPLACE indicator lights yellow.     When this indicator lights yellow, replace the projection lamp with a new one promptly. (pp. 55, 61)
The projector is off. (The AC power cord is unplugged.)
The projector is in stand-by mode. Press the ON/STAND-BY button to turn on the projector....

69ViewSonic PJL6243
69
Compatible Computer Specifications
Basically this projector can accept the signal from all computers with the V-, H-Frequency mentioned below and less than 140 MHz of Dot Clock.  When selecting these modes, PC adjustment can be limited.
ON-SCREEN DISPLAYRESOLUTIONH-Freq .(KHz)V-Freq .(Hz)VGA 1640 x 48031.4759.88VGA 2720 x 40031.4770.09VGA 3640 x 40031.4770.09VGA 4640 x 48037.8674.38VGA 5640 x 48037.8672.81VGA 6640 x 48037.5075.00
MAC LC13640 x 48034.9766.60MAC 13640 x...

70ViewSonic PJL6243
70
Appendix
Technical	Specifications
Mechanical Information   Dimensions (W x H x D)  13.41" x 4.59" x 9.86" (340.5mm x 116.5mm x 250.5mm)                                                                      (Not including protrusions)  Net Weight  6.4 lbs (2.9 kg)  Foot Adjustment  0˚ to 10˚     
Panel Resolution   LCD Panel System  0.63" TFT Active Matrix type, 3 panels   Panel Resolution  1,024 x 768 dots  Number of Pixels  2,359,296 (1,024 x 768 x 3 panels)...

71ViewSonic PJL6243
71
AppendixAppendix
This projector is compliant with PJLink Standard Class 1 of JBMIA (Japan Business Machine and Information System Industries Association). This projector supports all commands defined by PJLink Class 1 and is verified conformance with PJLink Standard Class 1.
For PJ Link password, see the User Guide of “Network Set-up and Operation.”
PJLink is a registered trademark of JBMIA and pending trademark in some countries.
PJ Link Notice
Projector Input
RGB
Computer 2...

72ViewSonic PJL6243
72
COMPUTER	IN	1	/	S-VIDEO	IN/	COMPONENT	IN	
Terminal:	Analog	RGB	(Mini	D-sub	15	pin)
512341096781514131112
Configurations	of	Terminals
Red/Cr/S-C Input   
Ground (Horiz.sync.)
Green/Y/S-Y Input
-----
Blue/Cb/--- Input
Ground (Red)
Ground (Green)
Ground (Blue)
1
5
2
4
3
6
7
8
+5V Power
Horiz. sync. Input/Output (Composite H/V sync.)
Ground (Vert.sync.)
DDC Data
Ground
Vert. sync.
DDC Clock
9
13
10
12
11
14
15
RX –
TX +
TX –
RX +
2
3
4
5
6
7
8
1
LAN	TERMINAL
-----
-----
----------...

73ViewSonic PJL6243
73
Dimensions
Unit: mm(inch)
Screw Holes for Ceiling MountScrew: M4Depth: 12.0 (0.47)
333.5(13.13)340.5(13.41)
4.3(0.17)
96.5(3.80)
250.5(9.86)141.5(5.57)
99.5(3.92)
105.1(4.14)116.5(4.59)
49.1(1.93)
37.3(1.47)57.6(2.27)
59.9(2.36)
32.9(1.30)
48.7(1.92)133.8(5.27)
89.3(3.52)178.7(7.04)
 23.8
(0.94)
53.7(2.11) 17.1
(0.67)
35.9(1.41)
198.8(7.83)
55.5(2.19)
25.0(0.98)
25.0(0.98)
196.0(7.72)
72.0(2.84)
93.0(3.66)
70.0(2.76)
45.0(1.77)
70.5(2.78)
80.5(3.17)111.1(4.37)...

74ViewSonic PJL6243
74
Serial Control Interface
Appendix
Operation
This projector provides a function to control and monitor the projector’s operations by using the RS-232C serial port.
1
2
Connect a RS-232C serial cross cable to CONTROLPORT on the projector and serial port on the PC.(See p.9)Launch a communication software provided with PCand setup the communication condition as follows:
3Type the command for controlling the projector andthen enter the “Enter” key.
ExampleWhen you want to change the...