ViewSonic Pjl6243 Projector User Manual

15ViewSonic PJL6243
15
Connecting to Video Equipment
(MIC)-
External Audio Equipment
Audio cable   (stereo)
S-video cable  
Audio Output
S-video Output  
Audio Input
AUDIO IN(PC or MIC)
S-video-VGA  cable  Video cable   
COMPUTER  IN 1/ S-VIDEO IN/COMPONENT IN
VIDEO IN
Audio cable   (stereo)
AUDIO OUT (stereo)
AUDIO IN
Audio cable   (stereo)
Cables used for connection  • Video Cable • S-video Cable • S-video-VGA Cable • Audio Cables(Cables are not supplied with the projector. )
Note:•When the MIC...

16ViewSonic PJL6243
16
(MIC)-
Connecting	to	Component	Video	and	RGB	(Scart)	Equipment
External Audio Equipment
AUDIO IN
Audio cable (stereo)
Audio Input
Component Video Output(Y, Pb/Cb, Pr/Cr)
Audio OutputRGB Scart 21-pin Output
Scart-VGA cable 
Component-VGA cable
AUDIO OUT (stereo)
Component cable
COMPUTER IN 1/ S-VIDEO IN / COMPONENT IN 
Cables used for connection  • Audio Cables • Scart-VGA Cable • Component Cable • Component-VGA Cable (Cables are not supplied with this projector.)  
Unplug the power...

17ViewSonic PJL6243
17
Connecting the AC Power Cord
This projector uses nominal input voltages of 100-240 V AC and it automatically selects the correct input voltage. It is designed to work with single-phase power systems having a grounded neutral conductor. To reduce the risk of electrical shock, do not plug into any other type of power system.If you are not sure of the type of power being supplied, consult your authorized dealer or service center.Connect the projector with all peripheral equipment...

18ViewSonic PJL6243
18
The preparation display will disappear after 3 seconds.
(See page 52 for Lamp control status.)
Turning	On	the	Projector
Connect the projector’s AC power cord into an AC outlet. The POWER indicator lights red. Open the lens cap.
Press the ON/STAND-BY button on the top control or on the remote control. The POWER indicator lights green and the cooling fans start to operate. The preparation display appears on the screen. 
2
3
1Complete peripheral connections (with a computer, VCR,...

19ViewSonic PJL6243
19
Basic Operation
What is PIN code?
PIN (Personal Identification Number) code is a security code that allows the person who knows it to operate the projector. Setting a PIN code prevents unauthorized use of the projector.
A PIN code consists of a four-digit number. Refer to the PIN code lock function in the Setting Menu on pages 53-54 for locking operation of the projector with your PIN code.
Enter a PIN code
Use the Point ▲▼ buttons to enter a number. Press the Point ► button to fix...

20ViewSonic PJL6243
20
TO	MAINTAIN	THE	LIFE	OF	THE	LAMP,	ONCE	YOU	TURN	THE	PROJECTOR	ON,	WAIT	AT	LEAST	FIVE	MINUTES	BEFORE	TURNING	IT	OFF .
Power off? disappears after 4 seconds.
Turning	Off	the	Projector
Press the ON/STAND-BY button on the top control or on the remote control, and Power off? appears on the screen.
Press the ON/STAND-BY button again to turn off the projector. The POWER indicator lights red and the cooling fans stop (default setting), and you can unplug the AC power cord.
If L1 is...

21ViewSonic PJL6243
21
How to Operate the On-Screen Menu
The projector can be adjusted or set via the On-Screen Menu. The menus have a hierarchical structure, with a main menu that is divided into submenus, which are further divided into other submenus. For each adjustment and setting procedure, refer to respective sections in this manual.
Use the Point ▲▼ buttons to highlight or select a main menu item. Press the Point ► or the SELECT button to access the submenu items. (The selected item is highlighted...

22ViewSonic PJL6243
22
Basic Operation
Menu Bar
For detailed functions of each menu, see “Menu Tree” on pages 66-67.
Main MenuSub-Menu
③ Image select Used to select an image mode from among Dynamic, Standard, Real, Cinema, Blackboard(Green),  Colorboard and Image 1-4. (pp.32, 39)
④ Image adjust For computer source, used to adjust computer image [Contrast, Brightness, Iris, Color temp ., White balance	(R/G/B), Sharpness, Gamma, Reset and Store] (p.33).     For Video source, used to adjust picture image...

23ViewSonic PJL6243
23
Basic Operation
Rotate the Zoom Ring to zoom in and out.  Rotate the Focus Ring to adjust the focus of the image.  
Zoom	and	Focus	Adjustment
If a projected picture still has keystone distortion after pressing the AUTO SETUP button on the top control or the AUTO SET button on the remote control, correct the image manually as follows:
Press the KEYSTONE button on the remote control. The Keystone dialog box appears. Use the Point ▲▼ buttons to correct keystone distortion. The...

24ViewSonic PJL6243
24
Basic Operation
Sound Adjustment
1
2
Press the MENU button to display the On-Screen Menu. Use the Point ▲▼ buttons to select Sound. Press the Point ► or the SELECT button to access the submenu items. 
Press the VOLUME+/– buttons on the top control or on the remote control to adjust the volume. The volume dialog box appears on the screen for a few seconds.
Press the MUTE button on the remote control to select On to temporarily turn off the sound. To turn the sound back on, press the...