ViewSonic Pjl6243 Projector User Manual

35ViewSonic PJL6243
35
Computer Input
Select Digital	zoom	+. The On-Screen Menu disappears and D.	zoom	+ appears. Press the SELECT button to expand the image size. Use the Point ▲▼◄► buttons to pan the image. The Panning function can work only when the image is larger than the screen size. A projected image can be also expanded by pressing the D.ZOOM ▲ or the SELECT button on the remote control. 
To exit the Digital zoom +/– mode, press any button except the D.ZOOM ▲▼ buttons, SELECT and Point buttons....

36ViewSonic PJL6243
36
Video Input
Choose Video or S-video by pressing the VIDEO or the S-VIDEO button on the remote control.Before using these buttons, correct input source should be selected through menu operation as described below.
1
2
Video
Input	Source	Selection	(Video,	S-video)
Direct Operation
When video input signal is connected to the VIDEO jack, select Video.Video
When the input source is coming from video equipment connected to the COMPUTER IN 1/S-VIDEO IN/COMPONENT IN terminal with a...

37ViewSonic PJL6243
37
Video Input
Choose Computer	1(Component) or Computer	1(Scart)	by pressing the COMPONENT or the COMPUTER 1 button on the remote control.Before using these buttons, correct input source should be selected thro\
ugh Menu operation as described below.
1
Input Menu
2Use the Point ▲▼ buttons to select Computer 1 and then press the Point ► button.
Input	Source	Selection	(Component,	RGB	Scart	21-pin)
When the input source is coming from video equipment connected to the COMPUTER IN...

38ViewSonic PJL6243
38
Video System Selection
1AV	System	Menu	(Video	or	S-video)
AV	System	Menu	(Component)
2
If the projector cannot reproduce proper video image, select a specific broadcast signal format from among PA L, SECAM, NTSC, NTSC	4.43, PAL-M and PAL-N.
PAL/SECAM/NTSC/NTSC4.43/PAL-M/PAL-N
The projector automatically detects an incoming video signal, and adjusts itself to optimize its performance.
If the projector cannot reproduce proper video image, select a specific component video signal...

39ViewSonic PJL6243
39
Video Input
Image select Menu
IMAGE button
Dynamic
Real
Image 1
Image 2
Image 3
Image Mode Selection 
Image 4
Blackboard (Green)
Standard
Remote Control
IMAGE button
Select the desired image mode among Dynamic, Standard, Real, Cinema, Blackboard	(Green), Colorboard, Image 1, Image 2, Image 3 and Image 4 by pressing the IMAGE button on the remote control.
Standard
Picture mode with improved halftone for graphics.
Real
Blackboard	(Green)
Image	1–4
For the image projected on a...

40ViewSonic PJL6243
40
Image Adjustment
1
2
Press the Point ◄ button to decrease the contrast; press the Point ► button to increase the contrast (from 0 to 63).
Press the Point ◄ button to decrease the brightness; press  the Point ► button to increase the brightness (from 0 to 63).
Contrast
Brightness
Press the Point ◄ button to lighten R/G/B tone; press thePoint ► button to deepen R/G/B tone (from 0 to 63).
White	balance	(Red	/	Green	/	Blue)
Use the Point ◄► buttons to select the desired Color temp....

41ViewSonic PJL6243
41
An interlaced video signal can be displayed in progressive mode. Select one of the following options. Off ......... Disabled. L 1 ......... For an active picture. L 2 ......... For a still picture. Film ....... For watching a film. With this function, the projector reproduces pictures faithful to the original film quality.
Progressive
Noise reduction
Noise interference on the screen can be reduced. Select one of the following options to get smoother images. Off ......... Disabled....

42ViewSonic PJL6243
42
This projector has the picture screen resize function, which enables you to customize the image size.
Normal
Screen	Size	Adjustment
Screen Menu1
2
Provide the image to fit the screen size while maintaining the aspect ratio of the input signal.
Custom adj .
Note: • When no signal is detected, Normal is set automatically and the Aspect adjustment menu disappears. • The adjustable range for Scale	H/V and Position	H/V is limited depending on the input signal.
Full
Provide the full...

43ViewSonic PJL6243
43
Keystone
This function is used to adjust keystone distortion of the  projected image. Use the Point ▲▼ buttons to choose the item you want to adjust. Keystone    
To correct keystone distortion, press the SELECT button.  Keystone appears on the screen. Use the Point ▲▼ buttons to correct keystone distortion (p. 23). Store or Reset    
To store or reset the keystone correction, press the Point ► button.    Store ............. 
Keep the keystone correction even when the AC power cord...

44ViewSonic PJL6243
44
SettingSetting
Setting
Setting MenuPress the MENU button to display the On-Screen Menu. Press the Point ▲▼ buttons to select Setting and press the Point ► or the SELECT button to access the submenu items.
1
2Use the Point ▲▼ buttons to select the desired item and then press the Point ► or the SELECT button to access the selected item.
This projector has a Setting menu that allows you to set up the other va\
rious functions described below.
Language
Menu position
This function is...