ViewSonic Pjl6243 Projector User Manual

5ViewSonic PJL6243
5
Safety Instructions
All the safety and operating instructions should be read before the product is operated.
Read all of the instructions given here and retain them for later use. Unplug this projector from AC power supply before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning.
Follow all warnings and instructions marked on the projector.
For added protection to the projector during a lightning storm, or when it is left unattended and unused for long...

6ViewSonic PJL6243
6
Safety Instructions
Openings in the cabinet are provided for ventilation. To ensure reliable operation of the product and to protect it from overheating, these openings must not be blocked or covered. 
 CAUTION
Hot air is exhausted from the exhaust vent. When using or installing the projector, the following precautions should be taken. 
–   Do not put any flammable object or spray can near the projector, hot air is exhausted from the ventilation holes.–   Keep the exhaust vent at...

7ViewSonic PJL6243
7
Compliance
The AC Power Cord supplied with this projector meets the requirement for use\
 in the country you purchased it.  
AC Power Cord for the United States and Canada:
AC Power Cord used in the United States and Canada is listed by the Unde\
rwriters Laboratories (UL) and certified by the Canadian Standard Association (CSA).AC Power Cord has a grounding-type AC line plug. This is a safety feature to be sure that the plug will fit into the power outlet. Do not try to defeat this...

8ViewSonic PJL6243
8
Part Names and Functions
⑤⑦⑧
③②
Front
Back
⑥
① Top	controls	and	Indicators② Zoom	Ring③ Focus Ring④ Speaker⑤ Infrared Remote Receiver⑥ Projection Lens⑦ Lens Cap  (See page 60 for attaching.)
⑧ Air Intake Vent
⑨ Lamp Cover⑩ Terminals	and	Connectors⑪ LAN	Connection	Terminal⑫ Power Cord Connector
Note:
Replace only with the same types of the supplied cords or cables. Using improper cords or cables may cause an electric shock or a fire.  
⑬ Exhaust Vents
 CAUTION
Hot air is exhausted...

9ViewSonic PJL6243
9
‰
(MIC)-
Part Names and Functions
Rear	Terminal	
②③①
⑥
⑤
⑧
④
④   VIDEO IN Connect the composite video output signal to this jack (p.15).
②  COMPUTER	IN	1	/S-VIDEO	IN	/	COMPONENT	IN Connect output signal from a computer, component video output, RGB scart 21-pin video output or S-video output to this terminal. (pp.14-16).
⑥  AUDIO	OUT	(VARIABLE) Connect an external audio amplifier to this jack (pp.14-16). This terminal outputs sound from AUDIO IN terminal. Never plug headphones into...

10ViewSonic PJL6243
10
Part Names and Functions
Top	Control
⑦  LAMP REPLACE indicator Lights yellow when the projection lamp reaches its end of life (pp.61, 68).
⑧  WARNING indicator – Lights red when the projector detects an abnormal condition.   – Blinks red when the internal temperature of the projector exceeds the operating range (pp.58, 68).④  ON/STAND–BY 	buttonTurn the projector on or off (pp.18-20).
⑤  POWER indicator – Lights red when the projector is in stand-by mode.  – Lights green during...

11ViewSonic PJL6243
11
Note:To ensure safe operation, please observe the following precautions:– Do not bend, drop or expose the remote control to moisture or heat.– For cleaning, use a soft dry cloth. Do not apply benzene, thinner, spray, or any chemical material.
Remote Control
⑦
⑭⑩
⑳④
⑱
②
⑧
⑨
⑬
⑯
⑤
⑥
⑪
⑫
⑲
⑮
③
② AUTO	SET	button
Execute the setting of Auto setup (includes Input search, Auto PC adj. and Auto Keystone functions) in the setting menu.
(pp.23, 45)
⑤ S-VIDEO button  Select the S-VIDEO input...

12ViewSonic PJL6243
12
Adjustable Foot
Adjustable FootFoot Lock Latch
Projection angle can be adjusted up to 10.0 degrees with the adjustable foot. Lift the front of the projector and push the foot lock latch on the projector.Release the foot lock latch to lock the adjustable foot and rotate the adjustable foot to adjust the position and tilt.To retract the adjustable foot, lift the front of the projector and push and undo the foot lock latch. Keystone distortion of the projected image can be corrected...

13ViewSonic PJL6243
13
Setting up
Install the projector according to the environment and manner the projec\
tor will be used in.For the case of installation in a special state such as ceiling mount, t\
he specified mounting accessories and service may be required. Before installing the projector\
, consult your dealer about your installation.
Installation
Arrangement
Refer to the following tables T- 1 to determine the screen size and projection distance. The values shown in the table are calculated for a...

14ViewSonic PJL6243
14
Connecting to a Computer
Unplug the power cords of both the projector and external equipment from the AC outlet before connecting cables.
Note:• When the MIC function is set to Off in the Sound menu, the MIC function is disabled.•When MIC is set to On in Sound Menu, AUDIO IN (PC/MIC) and AUDIO IN(L/R) terminals can be connected at the same time. At this time, AUDIO IN (PC/MIC) termianl as MIC input, AUDIO IN(L/R) terminal is as COMPUTER or VIDEO audio input.• Input sound to the...