ViewSonic Pjl6243 Projector User Manual

ENGLISH
ViewSonic PJL62435
5
ENGLISH
ViewSonic PJL62435
5
1Chapter 1 
 Preparation
Describes features and operating environment of this projector.     

ViewSonic PJL62436
6
Chapter 1 Preparation
Features
E-Mail Alert function (+p.25)
The projec tor sends mes-
sages to the registered e -mail 
addresses when a lamp abnor-
malit y or power failure occurs 
with the projec tor. This mes-
sage describes how to solve the 
cause of the problems. You can 
take ef ficient ac tion for quick 
recovery.
Web Management function (+p.31)
With this func tion, you can 
monitor projector functions 
such as power status, lamp 
status, input mode, signal 
condition, lamp...

ENGLISH
 
ViewSonic PJL62437
7
Features
Required operating environment for computers
When operating the projector via networks, computers should meet the operating envi-
ronment below.
LAN Terminal
Network specifications of the projector
Data communication standards10Base-T (10Mbps) / 100Base-TX compatible
ProtocolTCP/IP
Operating System
Windows 2000, Windows XP (32bit version), Windows Vista (32bit version), Windows 7 (32bit version)Mac OS X v 10.4 or 10.5
Computer environment
Recommended CPUWindows:...

ViewSonic PJL62438
8
Chapter 1 Preparation
Cabling Between the Projector and a Hub or computer*1 
Use an appropriate cable when connecting the projector and a hub or computer.
ConnectionEthernet  cable typeMax. cable length
Projector - HubSTP straight-through  category 5 *2 cable100m (328feet)
Projector - ComputerSTP crossover category 5*2 cable100m (328feet)
*1   There may be other limitations depending on your network environment or LAN specification. Please consult your network administrator for...

ENGLISH
 
ViewSonic PJL62439
9
Flow of installation
Flow of installation
To use the projector via the networks, follow the setup procedures below.
STEP 1Connect the LAN and set the configuration.
STEP 2Network Configuration has completed.
Decide depending on the LAN environment.
	* “2. Setup Procedures” (pp.11–16).
Detailed LAN configurations need to be done with a browser later.
First, complete the Wired LAN connection between computers and projec-
tors, then start browser configurations.
	* “3. Basic...

ViewSonic PJL624310
10
Chapter 1 Preparation   

ENGLISH
ViewSonic PJL624311
11
ENGLISH
ViewSonic PJL624311
11
Chapter 2 
 Setup Procedures
2
Describes how to configure the network.     

ViewSonic PJL624312
12
Chapter 2 Setup Procedures
Setting procedures and contents differ depending on the LAN installation location.  
When installing, consult your system administrator to set up the LAN appropriately.
Connect the LAN cable to the LAN connection terminal of the projector.
Network configuration
Set the Wired LAN network through the projector menu. Detailed network settings will be 
made with browser. Refer to “3. Basic setting and operation” (p.17-30). First, complete the 
settings...

ENGLISH
ViewSonic PJL624313
13
 
Network configuration
*1 Set "On" only when the DHCP server is available on your network environment.*2 Set [255.255.255.255] if the network does not provide the gateway (router).*3 Set [255.255.255.255] if you do not use the function E-mail alert.
3. Select "Network setting" in the Network menu and press SELECT button, and then the 
LAN setting screen will appear and selected LAN settings will be displayed. Adjust each 
item to the setting environment....

ViewSonic PJL624314
14
Chapter 2 Setup Procedures
The Network PIN code is to restrict the access to the projector through the network.
After setting the Network PIN code, you need to enter it to operate the projector via the 
networks.
Network PIN code
Network information
1. Select "Network PIN code" in the Network menu, and press SELECT button. 
 The Network PIN code screen will appear.
2. Set the Network PIN code.
Set the figures with the Point ed buttons and move to the next items with the...