ViewSonic Pjl6243 Projector User Manual

ENGLISH
ViewSonic PJL624335
35
 
System
This function is to select the system of signal 
input to the projector. The available system 
mode are listed on the pull-down menu but-
ton according to the input signal. Selec t a 
system and then click Set button.
Control
*  If the mode (Mode1 to Mode10) which is stored in the item "PC Adjustment" (* p.38) is available, they are also listed together with the above mode.
Available selection at the RGB input
Item  Description
XGA1 ...........................

ViewSonic PJL624336
36
Chapter 4 Controlling the Projector
Sound 
This func tion is to adjust the sound of the 
projector. The values in the text box represent 
the current control value or status.
Item Description
Volume ................... 
Adjusts the sound volume from the speaker. (0 ~ 63)Mute ......................... 
Suppresses the sound. (ON, OFF)
 *  The MIC functions MIC, MIC gain, Standby MIC out cannot be selected through the network. When using the MIC functions, please set by using the On...

ENGLISH
ViewSonic PJL624337
37
 
Item Description
Contrast .............................. 
Adjusts picture con-trast (0~ 63)Brightness ......................... 
Adjusts picture bright-ness (0~ 63)Color ...................................... 
Adjusts picture color saturation (0~ 63)Tint ......................................... 
Adjusts picture hue (0~ 63)Iris ............................................ 
Switches iris mode. (ON, OFF)Color temp. ....................... 
Sets a color temperature mode....

ViewSonic PJL624338
38
Chapter 4 Controlling the Projector
PC adjustment
Click PC Adj. on the main menu. This function is to adjust the signal from 
the computer connected to the projector to obtain the proper picture 
image on the screen. 
Item Description
Current mode ...... 
Displays a current mode like VGA, SVGA, XGA. SXGA, UXGA, WXGA, etc. or Mode1 - Mode10 which are the customized mode created by using the "Mode Store" function described below.
Auto PC adj.......... 
Performs automatic...

ENGLISH
ViewSonic PJL624339
39
 
Setting up the projector
Click Setting on the main menu. This function is to set up the projector. 
Select the sub menu [Screen setting] or [Setting] and then set up each set-
ting.
Setting up the projector
Item Description
Screen ..................... 
Switches the screen mode. (Normal, Full, Wide(16:9), Zoom, True, Custom) There may not be available mode depending on the input mode as shown in the table below.Ceiling ..................... 
Sets the image top/bottom and...

ViewSonic PJL624340
40
Chapter 4 Controlling the Projector
Item Description
Terminal ................. 
Sets the COMPUTER IN 2/MONITOR OUT terminal. (Computer2, Monitor out)Power management ..... 
Sets into the selected power manage-ment mode (Ready, Shutdown, OFF) if the input signal is interrupted and no control key is pressed for the specified period of time.  * The specified time can be set 1 to 30 min.Direct on ................ 
Sets the power-on mode when the AC cord is connected to the outlet....

ENGLISH
ViewSonic PJL624341
41
 
Setting up the projector
Item Description
Filter counter ...... 
Displays the filter counter. Reset the time after filter replacement. Click "Reset", a confirmation display appears, and then click "OK", the time will be reset. Filter warning..... 
Sets the time to indicate the filter warn-ing message on the screen. (OFF, 2000H, 3000H, 4000H) Factory default ... 
Sets all of the projector control items to the factory default setting except the fol-lowing...

ViewSonic PJL624342
42
Chapter 4 Controlling the Projector
Information
This page is to display the basic information of the projector status. Click 
Information on the main menu.
Items Description
Input  Displays selected input and source.System Displays selected signal system.Signal  Input signal status (Yes, No)Screen Displays screen mode.Lamp status   Displays lamp status with an icon. Refer to the table on the next page.Security Displays the security (PIN code lock) status (Yes, No)PJ time(h)...

ENGLISH
ViewSonic PJL624343
43
 
Indication of the lamp status
Icon display/backgroundStatus
White/BlueLamp on (Normal)
White/RedLamp on (Lamp is being used over a specified use time, replace lamp immediately)
Gray/BlueLamp off (Normal)
Gray/RedLamp off (Lamp is being used over a specified use time, replace lamp immediately)
Red/Blue with XLamp failure (Lamp failure, check lamp condition)
Red/Red with XLamp failure (Lamp failure and lamp is being used over a specified use time, replace lamp immediately)...

ViewSonic PJL624344
44
Chapter 4 Controlling the Projector