ViewSonic Pjl6243 Projector User Manual

6
Chapter 2 Set up
PJ Network Manager installation
1  
Set the supplied CD -ROM into the CD -ROM 
drive of your computer. Double click SetupTool.
exe icon in the "PJ Network Manager" folder in 
the CD-ROM.
2  Select "[English [United States]" from the pull-
down menu on the "Choose Setup Language" 
window and click OK button to start installing 
and then follow the installation wizards.
As the "Software License Agreement" will 
appear, read contents carefully and click Ye...

7
ViewSonic SNMP  Manager Software7
7
Chapter 3 
 Basic Operation
3      

8
Chapter 3 Basic Operation
Launching and quitting PJ Network Manager
To launch PJ Network Manager, take one of the following.
- Select "PJ Network Manager" from the menu "Start" - "All programs".
- Double click a management file*1.
Tool barMenu
Status list
Status barPolling times indication
Event indication
Items Description
Menu .....................................Executes a command with menu selectionTool bar ...............................Executes a command assigned to a...

9
Quitting PJ Network Manager
To quit the PJ Network Manager, click the close box on top right of the status window, or 
select "Exit" from the "File" menu
[Note]
* The PJ Network Manager cannot open multiple status windows at the same time.
Menu tree
Menu Sub menu  Operation
File New Creates a new management file.
 Open Opens an existing management file.
 Save  Saves the active management file.
 Save As  Saves the active management file with a new file name.
 Exit  Quits the...

10
Chapter 3 Basic Operation
Name of the button on the tool bar
The following commands are assigned to the buttons on the tool bar.
Button Operation
New ..................................................Creates a new management file.
Open ...............................................Opens an existing management file. 
Save .................................................Saves the active management file.
Target monitoring .................Starts or stops target monitoring.
Target display...

11
Addition of the target
1  Select Target Addition from Target menu. The target 
information registering window appears.
2  
Enter target setup information and click Update button. 
The information set on the target equipment are dis-
played on the system information items.
0  
When the target equipment is not operating, or it is not the monitoring equipment, the error dialog "Cannot obtain  infor-mation" will appear.
3   Click OK to close the window. Repeat the above steps to register for other...

12
Chapter 3 Basic Operation
Setting up the warning value
PJ Network Manager provides a function to 
display the alert when the use time of the set-
ting item reaches a specified setting time. The 
available setting items (use time) are depend-
ing on the target equipment.
1  Select a target on the status list with right click.
0  
When setting multiple targets together, select targets with pressing "Shift" or "Control" key.
2   Select Warning value setting on the popup 
menu. The setting...

13
What's Trap
Trap is the event predefined by the SNMP agent. If the predefined event ( "When PJ lamp is 
off ", "When internal PJ power circuit is failed" etc. ) happens, target sends trap information 
to the SNMP manager.
When happens the alert on the target
When happens the alert on the target
If the abnormality or connection error happens on the target, PJ Network Manager indi-
cates target name, icon and status column item with red color to let you know the abnor-
mality.
0...

14
Chapter 3 Basic Operation
Displaying all the status information of the target
Select a target and click  button on the tool bar. The following status window appears 
and displays all the available status information of the target.
0  
The target name and item which have an abnormality or connection error happen-ing are indicated with red.
0   
When PJ Network Manager cannot acquire the value of column information,  "---"  is displayed.
Stopping monitoring the target
To stop monitoring the...

15
Setting up the password of Telnet
The password of telnet can be set up by the procedure below. It is necessary to make a 
password, same as the network password.
1  
Select a target which you want to set up the password of telnet from the status list. You 
can select multiple targets.
2  Select Telnet setting from Target menu, Telnet setting dialog box will appear as the 
below figure. Set a password and click OK button. When multiple targets are selected, all 
the selected targets are set as the same...