ViewSonic Pjl6243 Projector User Manual

ENGLISH
ViewSonic PJL624315
15
 
Network factory default
Network factory default
1. Select “Network factory default” in the Network menu and press SELECT button.
2. A confirmation box appears and select "Yes" and then press SELECT button.
3. Another confirmation box appears and select "Yes" and then press SELECT button.
4.  
All the wired LAN settings will go back to the factory default settings. For details, refer to 
“Wired LAN factory default settings” (p.16).   

ViewSonic PJL624316
16
Chapter 2 Setup Procedures
Wired LAN factory default settings
Parameter
SELECTED LAN
LAN 1LAN 2LAN 3
DHCPOFFONOFF
IP ADDRESS169.254.100.100192.168.100.100192.168.100.100
SUBNET MASK255.255.0.0255.255.255.0255.255.255.0
GATEWAY ADDRESS255.255.255.255255.255.255.255255.255.255.255
DNS ADDRESS255.255.255.255255.255.255.255255.255.255.255   

ENGLISH
ViewSonic PJL624317
17
ENGLISH
ViewSonic PJL624317
17
Chapter 3 
 Basic Setting and Operation
3
Describes basic operations and settings for controlling the projec-
tor by using the web browser. It is required that computer and 
projector is connected to the network and the network address is 
properly configured.     

ViewSonic PJL624318
18
Chapter 3 Basic Setting and Operation
Login the setting page of the projector
[1] Enter the IP address
Launch the web browser installed in your 
computer, enter the IP address into the 
"Address" on the browser and then press 
"Enter" key.
Enter the address that you configured in 
item "Network configuration" (* p .12 ).
[2] Login
 
If the setting page has set the password, the authentication window will appear. In this 
case type "user" onto the...

ENGLISH
ViewSonic PJL624319
19
 
[3] Display of main setting page
The following main set ting page will be displayed according to your display mode 
selection. Perform various kinds of settings through this page. Click on the menus to dis-
play the control and setting pages.
Main setting page in the display
Setting page
Displays the control and setting items according to the selected menu.
Main menu
For selection of  control and setting items of the projector. 
Sub menu tabSwitches the sub menu tab....

ViewSonic PJL624320
20
Chapter 3 Basic Setting and Operation
How to use the setting page
To control and set up the projector, use the setting menus on the web browser. Describes the 
basic operation and procedures commonly used on this manual.
The setting menu appears when 
clicking the sub menu tab. 
* Each item has a valid setting range respectively.
Example of the setting page
*		The value in the text box indicates current value.
*  Each item has a valid setting range. The setting value exceeding this...

ENGLISH
ViewSonic PJL624321
21
 
How to use the setting page
Radio button setting
Select an item by selecting a radio button.
Check box setting
Select items by ticking on check boxes.   

ViewSonic PJL624322
22
Chapter 3 Basic Setting and Operation
Initial setting
After installing the projector, perform the following basic initial setting.
Click Initial Setting on the main menu to display the initial setting page.
Item Description
Language .............. 
Switches display language on the setting page. (Japanese, English)Model name ....... 
Indicates the model name of the projectorNetwork PIN code ...... 
Sets the Network PIN code to login the setting page (+p.23) PJLink...

ENGLISH
ViewSonic PJL624323
23
 
Initial setting
Network PIN code setting
This is to set the Network PIN code to restrict 
the access from an unauthorized person 
through the network. 
Enter a 4 - digit number as the Net work PIN 
code onto the text box and click Set button. 
  
The projector begins restar ting and it takes 
about 10 seconds. Close (Quit) the web 
browser and access to the login page again in 10 seconds. This is to perform the login 
authentication firmly.
The default Network PIN code...

ViewSonic PJL624324
24
Chapter 3 Basic Setting and Operation
Network configuration
Click Network on the main menu. The following setting page is displayed. 
The IP Address, Subnet Mask, Default Gateway, DNS (Domain Name Server) 
and projector name are set up on this menu.
The IP address and Subnet Mask have been configured already in chapter "Installation". 
If you want to change them or configure default gateway or DNS, perform them in this 
page. If you change them, the projector begins...