ViewSonic Pjl6243 Projector User Manual

ENGLISH
ViewSonic PJL624355
55
 
Q&A
Q&A
Installation/Access
Q Why doesn’t the setting page appear in my web browser?
A Following causes are possible. Please check them.
 1. The projector does not connect to the network.
  Check LED indicators status (* p .12 ).
 -  Check the connection of LAN cable if the LINK Lamp does not light green.
  -  
Check the network configuration of the projector if the ACT Lamp does not 
blink orange.
  2. Wrong network configuration of the computer.
    Check the network...

ViewSonic PJL624356
56
Chapter 5 Appendix
Q  We use the DHCP/BOOTP server to assign the IP address. Is it possible to 
use the projector in this network environment?
A 
   
Possible. This projector supports the DHCP/BOOTP server. To use this projector in 
this network environment, set it up so that the DHCP/BOOTP server does not assign 
the IP address configured to this projector for another device on the network. Please 
consult your network administrator (* p p .13 ,  24).
Q  How can I install several...

ENGLISH
ViewSonic PJL624357
57
 
Q&A
Operation
Q Why can't be turned on/off  with web browser?
A 
  
Please make sure the settings of the projector are correct to use the projector. 
Please set the Standby mode of the projector's Setting menu to "Network". Refer to 
"4. Controlling the Projector" * "Power control and status check" (*	pp.32 - 33).
Q Why can't I change the controls in the setting page with web browser?
A 
  
Please make sure the projector is turned on....

ViewSonic PJL624358
58
Chapter 5 Appendix
Others
Q What are the rules for IP address assignment?
A  
If the network is constructed with TCP/IP protocol, a unique IP address is required 
for each piece of network equipment. The following are basic rules of the assign-
ment.
 R u l e1
     Do not configure the same IP address to the net work equipment in the 
same network group. Each piece of equipment must be assigned a unique IP 
address.
     If the IP address is set [192.168. x. x], the Subnet Mask...

ENGLISH
ViewSonic PJL624359
59
 
Q&A
Q Can I update the firmware of the projector.
A 
  
It is possible to update the firmware through the network. It is required to have a 
special tool for the updating. For further information please consult your local dealer. 
The version number of the firmware is indicated on the lower part of the "Initial set-
ting" page.
Version of the firmware   

PJ Network Manager for Windows 

2
Contents ........................................................................\
..........2
Chapter 1 Introducing ..........................................................3
Introducing ........................................................................\
..............................................................................3
SNMP ........................................................................\...

3
Introducing
This PJ Network Manager is a SNMP manager software for the network equipment which 
supports the private MIB (Management Information Base).
By installing the PJ Network Manager to the computer, you can monitor the equipment 
simply such as the projector, the projection monitor and the flat display monitor connect-
ed to the network.
*  
The PJ Network Manager can handle our products which has a SNMP agent function. 
SNMP
SNMP is an abbreviation for Simple Network Management Protocol.
On the...

4
Operating Environment
Limited condition
The number of agents monitored is up to 200.
Chapter 1 Introducing
Expression/Abbreviation
The OS of the computer and the Web browser described in this manual is Windows XP 
Professional and Internet Explorer 6.0. In case of another OS or Web browser, some instruc-
tion procedures may differ from the actual operation depending on your computer envi-
ronment.
Use of this manual
This manual does not provide the description of basic operation and functions for...

5
ViewSonic SNMP  Manager Software5
5
Chapter 2 
 Set up
2