ViewSonic Pjl6243 Projector User Manual

							ENGLISH
ViewSonic PJL624315
15
 
Network factory default
Network factory default
1. Select “Network factory default” in the Network menu and press SELECT button.
2. A confirmation box appears and select "Yes" and then press SELECT button.
3. Another confirmation box appears and select "Yes" and then press SELECT button.
4.  
All the wired LAN settings will go back to the factory default settings. For details, refer to 
“Wired LAN factory default settings” (p.16).   
						

							ViewSonic PJL624316
16
Chapter 2 Setup Procedures
Wired LAN factory default settings
Parameter
SELECTED LAN
LAN 1LAN 2LAN 3
DHCPOFFONOFF
IP ADDRESS169.254.100.100192.168.100.100192.168.100.100
SUBNET MASK255.255.0.0255.255.255.0255.255.255.0
GATEWAY ADDRESS255.255.255.255255.255.255.255255.255.255.255
DNS ADDRESS255.255.255.255255.255.255.255255.255.255.255   
						

							ENGLISH
ViewSonic PJL624317
17
ENGLISH
ViewSonic PJL624317
17
Chapter 3 
 Basic Setting and Operation
3
Describes basic operations and settings for controlling the projec-
tor by using the web browser. It is required that computer and 
projector is connected to the network and the network address is 
properly configured.     
						

							ViewSonic PJL624318
18
Chapter 3 Basic Setting and Operation
Login the setting page of the projector
[1] Enter the IP address
Launch the web browser installed in your 
computer, enter the IP address into the 
"Address" on the browser and then press 
"Enter" key.
Enter the address that you configured in 
item "Network configuration" (* p .12 ).
[2] Login
 
If the setting page has set the password, the authentication window will appear. In this 
case type "user" onto the User Name text area and the login Network PIN code onto 
the Password text area and then click OK (Log in) button.*  The entering User Name must be "user" and it can not be changed.
[Note] 
When accessing the projector for the first time or the Network PIN code "0000" is set, the auto-login will be performed and the next main setting page is displayed.
* The numerical value is a setting example.   
						

							ENGLISH
ViewSonic PJL624319
19
 
[3] Display of main setting page
The following main set ting page will be displayed according to your display mode 
selection. Perform various kinds of settings through this page. Click on the menus to dis-
play the control and setting pages.
Main setting page in the display
Setting page
Displays the control and setting items according to the selected menu.
Main menu
For selection of  control and setting items of the projector. 
Sub menu tabSwitches the sub menu tab.
Login the setting page of the projector   
						

							ViewSonic PJL624320
20
Chapter 3 Basic Setting and Operation
How to use the setting page
To control and set up the projector, use the setting menus on the web browser. Describes the 
basic operation and procedures commonly used on this manual.
The setting menu appears when 
clicking the sub menu tab. 
* Each item has a valid setting range respectively.
Example of the setting page
*		The value in the text box indicates current value.
*  Each item has a valid setting range. The setting value exceeding this becomes invalid. Some con-trol items can not be used depending on the selecting input mode or functions of the projector you use. In this case, the values of those items are indicated with "---".
Text box setting
Enter a number or text and then click Set button.
or 
Change a value with – or + button.
Pull-down menu setting
Select an item with pull-down menu button and then click Set button.
Types of setting   
						

							ENGLISH
ViewSonic PJL624321
21
 
How to use the setting page
Radio button setting
Select an item by selecting a radio button.
Check box setting
Select items by ticking on check boxes.   
						

							ViewSonic PJL624322
22
Chapter 3 Basic Setting and Operation
Initial setting
After installing the projector, perform the following basic initial setting.
Click Initial Setting on the main menu to display the initial setting page.
Item Description
Language .............. 
Switches display language on the setting page. (Japanese, English)Model name ....... 
Indicates the model name of the projectorNetwork PIN code ...... 
Sets the Network PIN code to login the setting page (+p.23) PJLink ....................... 
Switches PJLink password authentication. (ON, OFF) (+p.23)Password ............... 
Password for PJLink function (+p.23)   
						

							ENGLISH
ViewSonic PJL624323
23
 
Initial setting
Network PIN code setting
This is to set the Network PIN code to restrict 
the access from an unauthorized person 
through the network. 
Enter a 4 - digit number as the Net work PIN 
code onto the text box and click Set button. 
  
The projector begins restar ting and it takes 
about 10 seconds. Close (Quit) the web 
browser and access to the login page again in 10 seconds. This is to perform the login 
authentication firmly.
The default Network PIN code [0000] means no Network PIN code is set.  
*		When you connect the projector to the network, it is recommended to set a new Network PIN code. Only a four-digit number is valid for the Network PIN code.
PJLink and password setting
This is to set the PJLink password authentica-
tion on or off. If set "ON" with the PJLink pull-
down menu, the password must be required. 
Enter a password* onto the text box and click 
Set button. 
*		 
1 to 32 alphanumeric characters can be used for the password.
What's PJLink?
The projectors equipped with PJLink function can be used together on the same network, 
regardless of model or brand, for centralized control and monitoring. This standard was 
established by the Japan Business Machine and Information System Industries Association 
(JBMIA). Please visit the Website at http://pjlink.jbmia.or.jp/english/.
PJLink Notice
The projector is compliant with PJLink Standard Class 1 of JBMIA, and it supports all com-
mands defined by PJLink Class 1 and is verified conformance with PJLink Standard Class 1.
Projector InputPJLink InputParameterComputer 2RGBRGB 111Computer 1RGBRGB 212ComponentRGB 313S-videoRGB 414RGB (Scart)RGB 515VideoVideoVIDEO 222   
						

							ViewSonic PJL624324
24
Chapter 3 Basic Setting and Operation
Network configuration
Click Network on the main menu. The following setting page is displayed. 
The IP Address, Subnet Mask, Default Gateway, DNS (Domain Name Server) 
and projector name are set up on this menu.
The IP address and Subnet Mask have been configured already in chapter "Installation". 
If you want to change them or configure default gateway or DNS, perform them in this 
page. If you change them, the projector begins restarting and it takes about 10 seconds. 
Close (Quit) the web browser and access to the login page again in 10 seconds. 
*1 Set [0.0.0.0] if the network does not provide the gateway (router).*2 Set [0.0.0.0] if you do not use the function E-Mail alert.*3  If you use the DNS server, register the host name registered to the DNS server as a projector name. You can access with this projector name from any computers in your network. If you do not use the DNS server, access with the assigned IP address to the projector.* All the network setting will reset to the default when setting [0.0.0.0] of the IP Address.*  If you make incorrect settings, you cannot find out the new network settings. Be careful to set up them correctly, otherwise you cannot connect to the projector. It is recommended to make a note of them.
Item  Description
LAN mode ............Displays the selected LAN modeDHCP .........................Sets DHCP configuration (ON/OFF).IP address .............Sets IP address of the projectorSubnet mask .......Sets Subnet mask according to your network environment.Default gateway*1 .....Sets IP address of the default gateway (Router)DNS*2 ....................... 
Sets IP address of the DNS server. Must be set when using the e-mail functionProjector name*3 . 
Sets name of the projector. (64 characters maximum)
*   You must use the number specified by your administrator. The address must be entered as a group with four numbers split by a dot like [192.168.001.101].