ViewSonic Pjl6243 Projector User Manual

							65ViewSonic PJL6243
65
	 The	image	is	distorted	or	runs	off.	– Check PC adjust menu or Screen menu and adjust them.          See pages 30-31, 34-35.
 PIN code dialog box appears  – PIN code lock is being set. Enter a PIN code (the “1234” or numbe\
rs    at start-up .   you have set). See pages 19, 53-54.
	 The	Remote	Control	does  – Check the batteries.  not work .  – Make sure no obstruction is between the projector and remote     control.     – Make sure you are not too far from the projector when using the       remote control. Maximum operating range is 16.4'(5 m).                                                                                     – Make sure the code of the remote control is conformed to the       projector’s code. See page 52.     – Unlock the Key lock function for the remote control function.           \
                                                                              See \
page 53.
 Indicator blinks or lights . – Check the status of the projector with referring to "Indicators and      projector Condition". See page 68.        
 The	exclamation	mark	appears – Your operation is invalid. Operate correctly.        on the screen .
	 Top	control	does	not	work.																	– The top control is not available if the top control is locked at Key	lock          under Security of Setting section. See page 53.
 Unable to unlock the Logo PIN  – Contact the dealer where you purchased the projector or the service\
   code	lock,	Security	key	lock     center.       or Security PIN code lock .
    – The projector detects an abnormal condition. Unplug the AC power cord     and contact the dealer where you purchased the projector or the service        center.                                             appears on the screen
Appendix
WARNING :High voltages are used to operate this projector  . Do not attempt to open the cabinet .
If problems still persist after following all operating instructions, co\
ntact the dealer where you purchased the projector or the service center. Specify the model number and explain about the problem. We will advise you how to obtain service.   
						

							66ViewSonic PJL6243
66
Appendix
Menu	Tree
Computer	Input/Video	Input
VolumeMuteOn/OffSound0-63
RGB Component
S-videoRGB
RGB (Scart)
Input
Video
Computer 1
Computer 2
MICOn/OffMIC gain0-63Standby MIC outOn/Off
Dynamic
CinemaBlackboard (Green)
Image 1
Image selectStandard
ColorboardRed/Blue/Yellow/Green
Image 4
Real
InformationInput Source Information Display
LanguageSetting20 languages provided.
Blue/User/BlackOff /OnLogo select
Ready
On/Off
Code 1–Code 2
BackgroundDisplayLogo
Power management
Direct on
Remote control
Shut downOff
Security
Timer (1–30 Min)
L1/L2Fan
Off
UserCaptureYes/No
Off/OnLogo PIN code change
Logo PIN code lock
OffProjectorRemote control
Key lock
Default
Off/On1/On2PIN code change
On/Off
Standby mode
Auto PC adj.Auto keystoneAutoManualOff
Warning log
Yes/NoFactory default
Input searchOff/On1/On2Auto setup
Closed CaptionClosed CaptionOff/CC1/CC2/CC3/CC4ColorColor/White
Lamp controlHigh/Normal/ECO
HLamp counter
Yes/No
Lamp counter
Lamp counter reset
Menu position
Computer 2/Monitor outTerminal
HFilter counter
Yes/NoOff/2000H/3000H/4000HFilter counterTimerFilter counter reset
P-timer
Eco/Network
Count upCount downTimerStart/Stop/RestartResetExit
Off/On1/On2Fan controlVideo delay controlOff/On
PIN code lock   
						

							67ViewSonic PJL6243
67
AutoPA LSECAMNTSCNTSC 4.43PAL-MPAL-N
Video Input
Auto1080i1035i720p576p480p576i480i
0–630–63
Off
System (2)
System (3)
Image AdjustContrastBrightnessColorTint
RedGreenBlueSharpness
ResetStore
Gamma
Progressive
0–630–630–630–15 0–15
Image 1
Screen
Yes/No
OffNoise reductionL1L2
0–630–63
Image 4
L2L1
Film
Color temp.
Scale
Reset
H/V
H/VYes/NoYes/No
Custom adj.On/OffH&V
MidLowXLow
UserHigh
PositionCommon
IrisOff/On
SVGA 1Mode 1Mode 2 - - - -
Total dotsHorizontalVertical
Display area HDisplay area VReset
Image AdjustContrastBrightness
Color temp.
Red
Gamma
Store
0–630–63
Computer Input
PC adjust
0–63
0–15
Image 1
Image 4
Screen
Yes/No
 * Systems displayed in the System Menu vary depending on an input signal.
ResetYes/No
Sharpness0–15
Mode 10
Clamp
GreenBlue0–630–63
Store
Mode free
System (1)
Mode 1
ScaleH&VH/V
H/VYes/NoYes/No
On/Off
Auto PC adj.Fine sync0–31
MidLowXLow
UserHigh
Current mode
Mode 1
Mode 10
NormalFull
Digital zoom –
Custom
Digital zoom +
Custom adj.
ZoomWide(16:9)
CommonPosition
Reset
IrisOff/On
Ture
CeilingKeystone
ResetRearCeilingKeystone
ResetRear
Custom
NormalFull
ZoomWide(16:9)
Appendix   
						

							68ViewSonic PJL6243
68
Check  the  indicators  for  projector  condition.                                   
• • • green.• • • red• • • off
• • • blinks green.
 When the projection lamp reaches its end of life, the LAMP REPLACE indicator lights yellow.     When this indicator lights yellow, replace the projection lamp with a new one promptly. (pp. 55, 61)
The projector is off. (The AC power cord is unplugged.)
The projector is in stand-by mode. Press the ON/STAND-BY button to turn on the projector.
Projector ConditionPOWER
red/green
Indicators
LAMP REPLACE
yellow
WARNING 
red

The projector is preparing for stand-by or the projection lamp is being cooled down. The projector cannot be turned on until cooling is completed and the POWER indicator stops blinking.
The temperature inside the projector is abnormally high. The projector cannot be turned on. When the projector is cooled down enough and the temperature returns to normal, the POWER indicator stops blinking and the projector can be turned on. (The WARNING indicator keeps blinking.) 
The projector detects an abnormal condition and cannot be turned on. Unplug the AC power cord and plug it again to turn on the projector. If the projector is turned off again, unplug the AC power cord and contact the dealer or the service center for service and checkup. Do not leave the projector on. It may cause an electric shock or a fire hazard.

The projector is in the Power management mode. 

The projector has been cooled down enough and the temperature returns to normal. When turning on the projector, the WARNING indicator stops blinking.



The projector is operating normally. 
Indicators and Projector Condition
• • • blinks red.
Appendix   
						

							69ViewSonic PJL6243
69
Compatible Computer Specifications
Basically this projector can accept the signal from all computers with the V-, H-Frequency mentioned below and less than 140 MHz of Dot Clock.  When selecting these modes, PC adjustment can be limited.
ON-SCREEN DISPLAYRESOLUTIONH-Freq .(KHz)V-Freq .(Hz)VGA 1640 x 48031.4759.88VGA 2720 x 40031.4770.09VGA 3640 x 40031.4770.09VGA 4640 x 48037.8674.38VGA 5640 x 48037.8672.81VGA 6640 x 48037.5075.00
MAC LC13640 x 48034.9766.60MAC 13640 x 48035.0066.67
MAC 16832 x 62449.7274.55
SXGA 11152 x 86464.2070.40
SVGA 1800 x 60035.15656.25SVGA 2800 x 60037.8860.32SVGA 3800 x 60046.87575.00SVGA 4800 x 60053.67485.06SVGA 5800 x 60048.0872.19SVGA 6800 x 60037.9061.03SVGA 7800 x 60034.5055.38SVGA 8800 x 60038.0060.51SVGA 9800 x 60038.6060.31
SVGA 11800 x 60038.0060.51
ON-SCREEN DISPLAYRESOLUTIONH-Freq .(KHz)V-Freq .(Hz)
XGA 101024 x 768XGA 111024 x 768XGA 121024 x 768XGA 131024 x 768
62.0477.07
XGA 141024 x 768
61.0075.70
XGA 151024 x 768
35.52286.96(Interlace)46.9058.20
XGA 81024 x 768
47.0058.30
XGA 91024 x 768
58.0372.00
SXGA 41280 x 1024
63.4879.3536.0087.17(Interlace)
63.3459.98
SXGA 51280 x 1024SXGA 61280 x 1024SXGA 71280 x 1024
63.7460.0171.6967.19
SXGA 101280 x 960
81.1376.107
60.0060.00
XGA 11024 x 768
XGA 41024 x 768
48.3660.00
XGA 61024 x 768XGA 71024 x 768
56.47670.07
48.5060.0244.0054.58
SXGA 81280 x 1024SXGA 91280 x 102463.9860.0279.97675.025
XGA 51024 x 76860.3174.92
VGA 7640 x 48043.26985.00
576i768 x 57615.62550.00(Interlace)480i640 x 48015.73460.00(Interlace)
SXGA 121152 x 90071.4075.60SXGA 111152 x 90061.2065.20
SVGA 10800 x 60032.7051.09
SXGA 131280 x 102450.0086.00(Interlace)
SXGA 21280 x 102462.5058.60SXGA 31280 x 102463.9060.00
XGA 21024 x 76868.67784.997XGA 31024 x 76860.02375.03
SXGA 181280 x 102446.4386.70(Interlace)SXGA 191280 x 102463.7960.18
SXGA 141280 x 1024SXGA 151280 x 1024SXGA 161280 x 1024SXGA 171152 x 900
50.0094.00(Interlace)63.3760.0176.9772.0061.8566.00
MAC1280 x 96075.0075.08MAC1280 x 102480.0075.08
SXGA+ 11400 x 105063.9760.19
MAC211152 x 87068.6875.06
WXGA 21360 x 768WXGA 31376 x 768WXGA 41360 x 768
47.7060.0048.3660.0056.1672.00
WXGA 11366 x 76848.3660.00
SXGA+ 21400 x 105065.3560.12SXGA+ 31400 x 105065.1259.90
SXGA 201280 x 102491.14685.024
480p640 x 48031.4759.88576p768 x 57631.2550.00
WXGA 71280 x 768WXGA 81280 x 76860.28974.89368.63384.837
WXGA 61280 x 76847.77659.87MAC 191024 x 76860.2475.08
WXGA 101280 x 80041.20050.000WXGA 91280 x 80049.60060.050
WXGA 111280 x 80049.70259.810
1080i1920 x 108033.7560.00(Interlace)
720p1280 x 720
1035i1920 x 1035
45.0060.00
33.7560.00(Interlace)
1080i1920 x 108028.12550.00(Interlace)
UXGA 41600 x 120093.7575.00
UXGA 11600 x 1200UXGA 21600 x 1200UXGA 31600 x 1200
75.0060.0081.2565.0087.570.00
720p1280 x 72037.5050.00
WUXGA 21920 x 1200WSXGA+ 11680 x 105074.03859.95065.29059.954
WUXGA 11920 x 120074.55659.885
WXGA+ 21440 x 90074.91860.000WXGA+ 11440 x 90055.93559.887
WXGA 121280 x 80063.9860.02
Note: The specifications are subject to change without notice.
Appendix   
						

							70ViewSonic PJL6243
70
Appendix
Technical	Specifications
Mechanical Information   Dimensions (W x H x D)  13.41" x 4.59" x 9.86" (340.5mm x 116.5mm x 250.5mm)                                                                      (Not including protrusions)  Net Weight  6.4 lbs (2.9 kg)  Foot Adjustment  0˚ to 10˚     
Panel Resolution   LCD Panel System  0.63" TFT Active Matrix type, 3 panels   Panel Resolution  1,024 x 768 dots  Number of Pixels  2,359,296 (1,024 x 768 x 3 panels)        
Signal Compatibility    Color System PAL, SECAM, NTSC, NTSC4.43, PAL-M, and PAL-N  SD/HD TV Signal  480i, 480p, 576i, 576p, 720p, 1035i, and 1080i  Input Scanning Frequency  H-sync. 15 kHz–100 kHz, V-sync. 50–100 Hz   
Optical Information  Projection Image Size (Diagonal)  Adjustable from 40” to 300”  Throw Distance  3.6' - 34.4' (1.1m - 10.5m)        Projection Lens F 2.0 ~ 2.15 lens with f 18.38 mm ~ 22.06 mm      with manual zoom and focus  Projection Lamp  215 W      
Interface Video Input Jack  RCA Type x 1   Audio Input Jack  RCA Type x 2 Computer In 1/S-video In/Component In  Mini Jack (stereo) x 1   /Computer In 2/Monitor Out/MIC Audio Input Jack  Computer In 1/S-video In  Mini D-sub 15 pin x 1   /Component Input Jack  Computer In 2 / Monitor Out Terminal  Mini D-sub 15 pin x 1 Control port    D-sub 9 pin x 1  Audio Output Jack  Mini Jack (stereo) x 1 (variable)      LAN Connection Terminal  RJ-45 
Audio  Internal Audio Amp  10 W RMS  Built-in Speaker  1 speaker, ø1.6" (40mm)  
Power Voltage and Power Consumption  AC 100–120 V (3.6A Max. Ampere),     50/60 Hz (The U.S.A and Canada)                                                     AC 100–240 V (3.6A -2.0A Max. Ampere),   50/60 Hz (For other countries)
Operating Environment Operating Temperature  41˚F–95˚F (5 ˚C–35 ˚C)  Storage Temperature  14˚F–140˚F (-10˚C–60 ˚C) 
Remote Control  Battery AAA or LR03 1.5V ALKALINE  TYPE x 2     Operating Range 16.4' (5 m)/±30˚  Dimensions 2.0" (W) x 0.7" (H) x 4.3" (D)     (52 mm x 18 mm x 110 mm)    Net Weight  2.37 oz (67 g) (including batteries) 
● The specifications are subject to change without notice.● LCD panels are manufactured to the highest possible standards. Even  though 99.99% of  the pixels are effective, a tiny fraction of the pixels (0.01% or less) may be ineffective by the  characteristics of the LCD panels.   
						

							71ViewSonic PJL6243
71
AppendixAppendix
This projector is compliant with PJLink Standard Class 1 of JBMIA (Japan Business Machine and Information System Industries Association). This projector supports all commands defined by PJLink Class 1 and is verified conformance with PJLink Standard Class 1.
For PJ Link password, see the User Guide of “Network Set-up and Operation.”
PJLink is a registered trademark of JBMIA and pending trademark in some countries.
PJ Link Notice
Projector Input
RGB
Computer 2  
Component
RGB (Scart)
PJLink Input
RGB 4
RGB 2
RGB 5
RGB 3
RGB 1
VIDEO 2Video
S-video
Computer 1
Video
Parameter
14
12
15
13
11
22
RGB
Attaching the Filter Cover to the Projector
The supplied filter cover is designed forpreventing dust accumulation on the filterwhen mounting the projector on the ceiling.
Place the filter cover on the filter as thepicture shown below.
Turn over the projector.1
2
Attach the projector to the ceiling mountin accordance with the instruction manualswhich come with the ceiling mount.
3
Note:   To keep the filter cover in position, be sure to attach the drop-prevention wire by threading it through the hole of the filter cover.Front feet
Projector
Caps
Filter Cover(supplied)
Hole
Drop-prevention Wire(not supplied)
To Ceiling Mount   
						

							72ViewSonic PJL6243
72
COMPUTER	IN	1	/	S-VIDEO	IN/	COMPONENT	IN	
Terminal:	Analog	RGB	(Mini	D-sub	15	pin)
512341096781514131112
Configurations	of	Terminals
Red/Cr/S-C Input   
Ground (Horiz.sync.)
Green/Y/S-Y Input
-----
Blue/Cb/--- Input
Ground (Red)
Ground (Green)
Ground (Blue)
1
5
2
4
3
6
7
8
+5V Power
Horiz. sync. Input/Output (Composite H/V sync.)
Ground (Vert.sync.)
DDC Data
Ground
Vert. sync.
DDC Clock
9
13
10
12
11
14
15
RX –
TX +
TX –
RX +
2
3
4
5
6
7
8
1
LAN	TERMINAL
-----
-----
----------
CONTROL 	PORT	CONNECTOR	(D-sub	9	pin)
-----
R X D
T X D
-----
SG
-----
-----
-----
Serial
1
2
3
4
5
6
7
8
-----9
COMPUTER	IN	2/MONITOR	OUT	(ANALOG)
Terminal:	Analog	RGB	(Mini	D-sub	15	pin)
512341096781514131112
Red Input/Output   
Ground (Horiz.sync.)
Green Input/Output
-----
Blue Input/Output
Ground (Red)
Ground (Green)
Ground (Blue)
1
5
2
4
3
6
7
8
-----
Horiz. sync. Input/Output 
Ground (Vert.sync.)
-----
-----
Vert. sync.
-----
9
13
10
12
11
14
15
Appendix   
						

							73ViewSonic PJL6243
73
Dimensions
Unit: mm(inch)
Screw Holes for Ceiling MountScrew: M4Depth: 12.0 (0.47)
333.5(13.13)340.5(13.41)
4.3(0.17)
96.5(3.80)
250.5(9.86)141.5(5.57)
99.5(3.92)
105.1(4.14)116.5(4.59)
49.1(1.93)
37.3(1.47)57.6(2.27)
59.9(2.36)
32.9(1.30)
48.7(1.92)133.8(5.27)
89.3(3.52)178.7(7.04)
 23.8
(0.94)
53.7(2.11) 17.1
(0.67)
35.9(1.41)
198.8(7.83)
55.5(2.19)
25.0(0.98)
25.0(0.98)
196.0(7.72)
72.0(2.84)
93.0(3.66)
70.0(2.76)
45.0(1.77)
70.5(2.78)
80.5(3.17)111.1(4.37)
111.1(4.37)80.5(3.17)
71.7(2.82)
118.0(4.65)
122.0(4.80)
Appendix   
						

							74ViewSonic PJL6243
74
Serial Control Interface
Appendix
Operation
This projector provides a function to control and monitor the projector’s operations by using the RS-232C serial port.
1
2
Connect a RS-232C serial cross cable to CONTROLPORT on the projector and serial port on the PC.(See p.9)Launch a communication software provided with PCand setup the communication condition as follows:
3Type the command for controlling the projector andthen enter the “Enter” key.
ExampleWhen you want to change the input to COMPUTER 2,Type ‘C’ ‘0’ ‘6’ ‘Enter’.
Functional Execution Command
Format
The command is sent from PC to the projector with the format below;           ‘C’ [Command] ‘CR’           Command: two characters (refer to the command            table below.- The projector decodes the command and returns the   ‘ACK’ with the format below;           ‘ACK’ ‘CR’- When the projector cannot decode the command, it   returns with format below.           ‘?’ ‘CR’
Baud rate           : 9600 / 19200 bpsParity check       : noneStop bit               : 1Flow control        : noneData bit               : 8
Note:• The default of the baud rate is set to 19200   bps. If an error occurs in the communication,   change the serial port and the communication   speed (baud rate).• Enter with ASCII 64-byte capital characters and   onebyte characters.
CommandFunction
C00Turn the projector ON
C01Turn the projector OFF(immediately OFF)C02Turn the projector OFFC05Computer 1C06Computer 2C07VideoC09VOLUME +C0AVOLUME -C0BAUDIO MUTE ONC0CAUDIO MUTE OFFC0DVIDEO MUTE ONC0EVIDEO MUTE OFFC0FScreen Normal size(4 : 3)C10Screen Wide size(16 : 9)C 11Image StandardC12Image RealC13Image CinemaC14Image 1C15Image 2C16Image 3C17Image 4C18BlackboardC19Dynamic
CommandFunction
C1CMENU ONC1DMENU OFFC1EDISPLAY CLEARC20BRIGHTNESS +C21BRIGHTNESS -C27IMAGE (Toggle)C28Direct on EnableC29Direct on DisableC2APower Management ReadyC2BPower Management OFFC2EPower Management Shut downC30D.ZOOM +C31D.ZOOM -C34Computer 1 S-VideoC39Image ColorboardC3APOINTER RIGHTC3BPOINTER LEFTC3CPOINTER UPC3DPOINTER DOWNC3FENTERC43FREEZE ONC44FREEZE OFFC50Computer 1 Analog RGB
C51Computer 1 Scart
C54Computer 1 ComponentC89Auto  PC ADJ.C8APRESENTATION TIMERC8BPRESENTATION TIMER (Exit)C8EKEYSTONE ↑C8FKEYSTONE ↓