Toshiba Strata Dk14, Dk40i, Dk424 Installation And Maintenance Manual

Strata AirLink Systems
BSIA System Installation
Strata DK I&M 5/9916-19
Strata AirLink Systems
Step 7: Install the Strata AirLink Manager Software
1. Check the PC hardware/
software against the required 
minimums.Refer to “Check the System Hardware and Software 
Requirements” on Page 16-3.
2. Close any open applications 
in Windows.
3. Insert the Strata AirLink 
Manager software floppy 
disk into the A:\ drive.
4. In Windows 98/95, click Start 
and Run
...or in Windows 3.11/3.1, 
open Program Manager and...

Strata AirLink Systems
BSIA System Installation
16-20Strata DK I&M 5/99
Step 8: Copy the Upgrade Software
1. Place the Strata AirLink 
floppy disk #2 into drive A:\.
2. In Windows 98/95, double-
click the My Computer icon
...or in Windows 3.11/3.1, 
open Program Manager. 
3. Navigate to the A: drive.
4. From the A:\ drive, highlight 
the file to be copied.
5. From the Edit pull-down 
menu, double-click Copy.
All of the highlighted files are copied to the clipboard.
6. Navigate to the...

Strata AirLink Systems
BSIA System Installation
Strata DK I&M 5/9916-21
Strata AirLink Systems
Step 9: Configure the System 
Substep A: Activate UTAM1. Make sure the PC is 
connected to a BSIA.
2. Turn on the PC. Windows automatically starts.
3. Double-click the Strata 
AirLink Manager Desktop 
icon.This displays only once when the system is initialized.
4. Type the name, organization 
(company name) and the 
password.
Important!If the password is forgotten, the software must 
be reloaded. The password...

Strata AirLink Systems
BSIA System Installation
16-22Strata DK I&M 5/99
2. Click Get UTAM Inputs from 
Strata Airlink.
3. Make a note of the BSIA 
serial number and input codes 
before calling the Strata 
AirLink Activation Desk 
because the staff will request 
these numbers.
4. Call the Strata AirLink 
Activation Desk, (949) 598-
4980 for the activation code.
NoteThe hours of operation are: Monday through Friday, 
8:00 a.m. to 5:00 p.m., Pacific Standard Time.
After the BSIA serial number and input...

Strata AirLink Systems
BSIA System Installation
Strata DK I&M 5/9916-23
Strata AirLink Systems
Substep B: Set the System Time and DateNormal LED indications display on the BSIA (PWR and 
Master LEDs ON) and Base Stations (PWR LED ON). 
Several messages display (below) on the PC screen as 
Strata AirLink Manager tests the installation.
Important!If the message “Waiting for Wireless 
Manager” does not appear in the Status 
window before the progress bar times out, or 
LED S2 remains lit after a reboot, the...

Strata AirLink Systems
BSIA System Installation
16-24Strata DK I&M 5/99
Substep C: Enter the System Settings4. Enter the time and date.
5.Click “Automatic daylight 
savings time adjustment,” if 
needed.
6. Send the new data to the 
configuration file.
7. Click Close.
1. Complete the System 
Settings form.See Table 16-5 on Page 16-28.
2. Open the Strata AirLink 
Manager program.
3. Click the Configuration icon.
4. Highlight Select Database.
5. Click System Settings
...or double-click “System 
Settings” in...

Strata AirLink Systems
BSIA System Installation
Strata DK I&M 5/9916-25
Strata AirLink Systems
Substep D: Configure the Handsets 7. Verify previous settings.
8. Enter the System and Base 
Station IDs, and timing 
intervals.The recommended timing intervals are:
©Stop ringing time – 4500 ms
©Dial tone delay – 200 ms
©DTMF cycle duration – 200 ms
©DTMF off duration – 100 ms
©Hookflash duration – 500 ms
©FT pause duration – 1000 ms
©FT inter-event pause – 100 ms
9. Click the Send icon. The new data is sent...

Strata AirLink Systems
BSIA System Installation
16-26Strata DK I&M 5/99
Substep E: Program the Button Sequences6. Click the Get icon.  The current data from the BSIA displays. 
7. Verify the previous BSIA 
settings.
8. Enter the handset ID.
9. Save the file (file extension is 
.udb).
10. Click the Send icon. The new data is sent to the BSIA.
1. Complete the Programming 
Button Sequences form.Consider the order in which commands and text displays 
should occur during the execution of a telephone feature....

Strata AirLink Systems
BSIA System Installation
Strata DK I&M 5/9916-27
Strata AirLink Systems
6. Click Select Event and 
Commands.
7. Click a command 
(
Hookflash, 1~0, *, #, etc.).The command appears in the designated column (labeled 
Event 1~20). The Select Event pull-down menu displays.
8. Highlight Display.
9. Click an LCD message 
(
CALL WAIT
, CALLBACK
, 
CAMPON
, etc.).The message appears in the designated column (labeled 
Event 1~20). A completed Feature Table looks like this:
3264
3265
3258 

Strata AirLink Systems
BSIA System Installation
16-28Strata DK I&M 5/99
Programming Sheets          10. Repeat Substeps 1~5 as 
necessary.
11. Save the file (file extension is 
.fdb).
12. Click the Send icon. The new data is sent to the BSIA.
Table 16-5 System Settings
ParameterDescriptionUnits/
RangeSuggested 
SettingYour 
Setting
System IDID for the system (written on the 
RWIU label).1~5
Base Station 1 ID ID of the first Base Station. 0~31
Base Station 2 ID ID of the second Base Station. 0~31
Stop...