Toshiba Strata Dk Admin/ Dk Backup User Guide

––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––Dial DK
41File Menu
Important!
lIn order for the DKAdmin/DKBackup Backup/Restore Data option to operate if you are 
using an IMDU or RMDS modem, Program 77-1, LED 14 must be “ON.” (See Prg 77-1 
LED 15 for RMDS bps rate in the Strata DK Programming Manual.)
lThe DKAdmin/DKBackup hardware key (green or red) must be installed whenever using 
the DKAdmin/DKBackup program (see the figure in Substep 6 on Page 2-4).
lThe...

Hangup Connection–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
42DKAdmin/DKBackup
3. Pressing Enter from the last field on the screen, saves the new information and returns 
you to the Customer List screen. Pressing Esc, exits the screen without saving the 
changes and returns you to the Customer List screen. 
Hangup Connection
äTo close the DK communications link
1. Type f and the File Menu displays.
2. Type h and DKAdmin/DKBackup sends +++ ATZ H from the DKAdmin/DKBackup...

43Administration Menu (DKAdmin)
Administration Menu (DKAdmin)6
NoteThe Administration Menu is only available in the DKAdmin program. The Check 
Processor Type, Backup/Restore Data, and View/Print Data appear in both the 
DKAdmin Administration Menu and the DKBackup Backup Menu. These functions 
are identical (e.g., screens, operations, commands, etc.) whether you use DKAdmin or 
DKBackup.
This chapter gives you step-by-step instructions on using the options available on the 
Administration Menu. The...

View Cabinet Diagram–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
44DKAdmin/DKBackup
View Cabinet Diagram
The base and expansion cabinet diagram displays the current Printed Circuit Board (PCB) 
configuration for the customer’s Strata DK system. The diagram varies based on the Strata DK 
model and processor listed in the Customer File Maintenance screen.
äTo view cabinet diagram
1. Select a customer 
using the Select 
Customer option in the 
File Menu.
2. From the...

––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––System/Station Administration
45Administration Menu (DKAdmin)
While you can assign these attributes to individual ports, station attributes cannot be copied 
from one port to another, or set for a range of ports from this menu. However, range 
programming for ports can be completed on a program level using the Program 
Administration option.
Some features (Intercom/DID numbers and VMID codes) enable you to set a range of values 
(default...

System/Station Administration–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
46DKAdmin/DKBackup
Programming/Updating System
äTo program or update the entire system or an individual port
1. Highlight the Telephone Location field of the physical port with which you wish to work. 
Enter the physical telephone location (for example, main conference room, VP office, 
lunch room, etc.).
2. Highlight the Log. Port No. field of the physical port.
NoteLogical port number assignments are the...

––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––System/Station Administration
47Administration Menu (DKAdmin)
NoteYou cannot duplicate DID numbers. 
...or
if you would like to change DID numbers for a range of ports, press F5. A Change dialog 
box displays similar to the one shown above.
Type the Starting DID Number you wish to assign and press Enter. A pop-up screen asks 
you to confirm the change. The DID numbers for the range of ports you specified are 
changed if you enter Yes.
6....

System/Station Administration–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
48DKAdmin/DKBackup
For information on selecting printers, see Chapter 8 – Options Menu. See Figure 8 for a 
System/Station Administration printout example.
System Speed Dial Number (F7)
äTo set or change available system speed dial numbers
NoteYou may assign system speed dial numbers to individual ports for up to 800 system 
speed dial numbers for the RCTUE/F processor, 100 for RCTUBA/BB, RCTUC/D...

––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––System/Station Administration
49Administration Menu (DKAdmin)
System LCD Messages (F8)
äTo set or change available system LCD messages
NoteYou may create up to 40 system messages which may be used by all LCD telephone 
ports. Each message may contain two lines using up to 32 characters.
1. From the System/Station 
Administration Screen, 
press F8. The System 
Messages screen 
displays (shown right). 
2. Highlight the Message 
Line 1...

System/Station Administration–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
50DKAdmin/DKBackup
©Press the spacebar to toggle between available options, or enable (indicated by a check 
mark)/disable (indicated by a blank) the attribute.
©Enter a value.
4. Press F10 to save the changed data to the customer database file. 
NoteAfter saving the data, press F9 to update the Strata DK with the changes. The 
DKAdmin PC must be connected to the Strata DK to upload changes to port...