Toshiba Strata Dk Admin/ Dk Backup User Guide

–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––Step 4: Install DKAdmin
11Installing DKAdmin
Notes
lIf you installed DKAdmin for the first time, a 280ADMIN directory was created and the 
DKAdmin files copied to it. 
lIf you upgraded an existing DKAdmin program, your customer database has been 
maintained in the 280ADMIN directory.
DOS Only PC from CD-ROM
In the rare case your DOS only PC has a CD-ROM, follow these steps:
1. Insert the CD-ROM into your CD-ROM drive. Change the DOS...

Step 5: Run DKAdmin Program–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
12DKAdmin/DKBackup
lIf you upgraded an existing DKAdmin program, your customer database has been 
maintained in the 280ADMIN directory.
lIf your Config.sys file is changed and you have problems with the new file when you 
reboot your computer, restore the original file (i.e., Config. bak).
Step 5: Run DKAdmin Program
NoteRunning the program under Windows 95, 98 or Windows NT is recommended for the 
best...

–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––Step 5: Run DKAdmin Program
13Installing DKAdmin
6. Highlight Yes and press Enter. If you choose No, your new passwords are not installed 
on the disk.
7. A “Copy to Drive” dialog box displays. The box defaults to drive A:. If you do not 
want drive A:, type the drive letter to which you wish to copy the installation information. 
Press Enter. A dialog box displays asking you to insert the DKAdmin Installation Disk 
#1 into the...

Step 5: Run DKAdmin Program–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
14DKAdmin/DKBackup
6. From Advanced Program Settings screen 
(shown at right), check only the Suggest 
MS-DOS mode as necessary option. 
Click on OK.
NoteOther screen settings should not be selected.
7. Select the Memory Tab screen (shown at 
right). All fields should read Auto. If you 
make changes, click on OK.
8. Select the Screen Tab screen (shown at right). 
The selected settings should be:
Usage:...

––––––––––––––––––––––––––––––––––––––––––––––––––Step 6: Connect to the Strata DK Telephone System
15Installing DKAdmin
9. Select the Misc Tab screen (shown at right).
10. Only the items in the Termination, Other and 
Windows shortcut keys boxes should be 
selected.
NoteIt is best not to allow screen savers.
If you make changes, click on Apply.
11. Close the DKAdmin Properties dialog box 
and return to Step 3 of “Start-up DKAdmin 
under Windows 98, 95 or Windows NT 4.0” 
on Page 12.
Step 6: Connect to...

Step 6: Connect to the Strata DK Telephone System–––––––––––––––––––––––––––––––––––––––––––––––––––
16DKAdmin/DKBackup 

17Installing DKBackup
Installing DKBackup3
Step 1: Check System Requirements
For optimum performance, run DKBackup on a personal computer with the following 
minimum specifications:
©IBM-compatible 386/486 personal computer or higher level
©20MB or larger hard drive
©CD-ROM or 3.5 1.44KB high-density floppy drive 
NoteDKBackup software is distributed on a CD-ROM disk. Installation can be performed 
using the CD-ROM disk or from floppy disk(s) copied from the CD-ROM DKBackup 
install program.
©VGA or SVGA...

Step 2: Power Up DKBackup PC––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
18DKAdmin/DKBackup
lFrom C:\280BCKUP\Data, type del *.ntx and press Enter.
lFrom C:\280BCKUP\XXX.DK, type del *.ntx and press Enter.
lRun “ReIndex Files” under Options/System Utilities Menu each time before you start to 
use DKBackup.
lAlways exit DKBackup before you turn your computer off.
Step 2: Power Up DKBackup PC
NoteThe DKBackup or DKAdmin Hardware Key must be installed on the PC LPT1 port, 
to allow the...

–––––––––––––––––––––––––––––––––––––––––––––––––––––Step 3: (Optional) Make Installation Floppy Disks
19Installing DKBackup
Step 3: (Optional) Make Installation Floppy Disks
From Windows
If you wish to install DKBackup on a PC that does not have a CD-ROM, you will need to 
make installation floppies from a PC that has a CD-ROM. You can make installation disks that 
install the program using a Windows application (this works on all PCs with Windows 3.x, 95, 
98 or Windows NT) or you can make DOS only...

Step 4: Install DKBackup––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
20DKAdmin/DKBackup
Step 4: Install DKBackup
DKBackup is a DOS application program that can be installed and run in either DOS or as a 
Windows DOS session.
CAUTION!If any earlier DKBackup (280Backup) release is already installed on the PC, 
do not delete it; install DKBackup Release 4.XX over the existing DKBackup 
(280Backup) version as described below. DKBackup is always installed in 
the 280Backup...