Toshiba Strata Dk Admin/ Dk Backup User Guide

––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––DNIS Administration
91Administration Menu (DKAdmin)
5. Highlight the DAY Ring field and enter the desired DAY ringing point.
©Press F2 to review the Ringing Point Identification codes.
©Press F6 to select a ringing point. Highlight the ringing point you wish to assign and 
press Enter.
6. Highlight the DAY2 Ring field and repeat Step 5.
7. Highlight the NIGHT Ring field and repeat Step 5.
8. Highlight the DNIS Voice Mail ID...

Distributed Hunt Group Administration––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
92DKAdmin/DKBackup
DNIS Tenant Lock Assignments
äTo set/change passwords for station port numbers
1. Select the DNIS Tenant Lock Assignments option and press Enter. The DNIS Tenant 
Night Lock Assignments screen displays.
This screen (shown 
right) enables you to 
set/change passwords 
for station port 
numbers for each of 
your DNIS tenant 
night numbers.
2. Highlight the Current 
Password field of the...

–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––Call Forward Assignments
93Administration Menu (DKAdmin)
3. Type a DH Group [DN] (up to four digits) and press Enter. If the entered number 
conflicts with a DN/Port already assigned, an error message displays.
4. Highlight the Hunt PDN 01 field. Type the hunt [PDN] number and press Enter
...or
press F6 to select the number from a table. Highlight the desired number and press 
Enter.
5. Repeat Step 4 for each Hunt PDN field.
NoteThe...

E911/CAMA Trunk Programs (R4 Only)–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
94DKAdmin/DKBackup
4. Highlight the next Call Forward Type field. A default value (All, Busy, No Answer, Busy/
No Answer) is entered in this field based on your selection in Step 3. To change the 
assignment, press + /- to toggle the selections and press Enter.
5. Highlight the Call Forward Timer field. A default value is entered in this field based on 
your selection in Step 3. To change the assignment, type...

–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––E911/CAMA Trunk Programs (R4 Only)
95Administration Menu (DKAdmin)
The Strata DK16e and DK424 accomplishes this with a special interface between the KSU and 
the CO. This special interface takes the station number information and sends it through the 
public network in a format compatible with the central E911 database. This special interface is 
required in addition to sending software within the Strata DK16e and DK424. The required 
interface...

E911/CAMA Trunk Programs (R4 Only)–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
96DKAdmin/DKBackup
äTo use the Strata DK’s program files to edit
1. Press F2 and the DK Code dialog box displays.
2. Type the DK Code: XXXX, where XXXX is the DK level 1 security code set in Program 
00. The DK System Program File screen displays.
NoteIf the Problem: Unable to Establish Communications screen 
displays, follow the troubleshooting steps on the screen and/or refer to Appendix A – 
Connecting to...

–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––ISDN Programs (R4 Only)
97Administration Menu (DKAdmin)
ISDN Programs (R4 Only)
NoteThis option cannot be used by Strata DK Release 3 or earlier.
The Integrated Services Digital Network (ISDN) Programs option in the Administration Menu 
enables you to maintain ISDN programs.
Release 4.0 provides the Primary Rate Interface (PRI) ISDN capabilities. Release 4.1/4.2 will 
introduce the ISDN Basic Rate Interface (BRI). PRI features apply...

Backup/Restore Data–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
98DKAdmin/DKBackup
NoteIf the Problem: Unable to Establish Communications screen 
displays, follow the troubleshooting steps on the screen and/or refer to Appendix A – 
Connecting to Strata DK to correct the problem.
3. Press F2 to select (tag) all Program No. (data) files.
4. Highlight Yes and press Enter. DKAdmin establishes communications to the Strata DK, 
turns on LED 10 in Program 77-1, and receives data...

99Backup Menu (DKBackup)
Backup Menu (DKBackup)7
NoteThe Backup Menu is only available in the DKBackup program. The Check Processor 
Type, Backup/Restore Data, and View/Print Data appear in both the DKBackup 
Backup Menu and the DKAdmin Administration Menu. These functions are identical 
(e.g., screens, operations, commands, etc.) whether you use DKAdmin or DKBackup.
DKAdmin/DKBackup makes backing up and restoring Strata DK programs quick and easy 
and saves valuable time and labor when upgrading Strata...

Check Processor Type–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
100DKAdmin/DKBackup
Check Processor Type
äTo check processor type
1. Select a customer using the Select Customer option in the File Menu.
2. From the Administration Menu/Backup Menu, press c to display a pop-up dialog box.
3.Enter the four-digit DK Code. The default is 0000. This is the “first level password” which 
is set in the Strata DK Program 00. The code does not display as you type it.
4....