Toshiba Strata Dk Admin/ Dk Backup User Guide

–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––Upgrade
111Backup Menu (DKBackup)
14. Press Enter and the following screen displays:
15. Press Enter (twice) after completing the Steps above. The Baud Rate Selection screen 
displays (shown below). This screen enables you to set the DKAdmin/DKBackup PC 
COM port baud rate which must match the baud rate of the TTY port set by the 
programming telephone in Program 76 (if upgrading TTY port to RSIU).
NoteThis Step enables...

Upgrade––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
112DKAdmin/DKBackup
16. Select the DKAdmin/DKBackup PC COM port baud rate and press Enter. The 
information screen below instructs you to pull Program 03 if you changed any PCBs 
during the upgrade process. DKAdmin/DKBackup can be used to pull Program 03 
automatically.
17. After reading the screen above, press Enter. The program displays: 
Pull Program 03 from DK to Update Customer Database?
NoteIf upgrading...

–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––Upgrade
11 3Backup Menu (DKBackup)
NoteFor Release 2, only the following message displays: Turn the system OFF (5 
sec).
23. Turn the system off (five seconds) and then on.
...or
When the screen displays the message Perform Automatic Power OFF/ON 
Simulation?, highlight Yes (Release 3 or Release 4 upgrades only).
24. Press Enter and DKAdmin/DKBackup runs Program 91-2 and displays the screen below 
(Release 3 or Release 4...

Upgrade––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
114DKAdmin/DKBackup
Important!
When using DKAdmin/DKBackup, the following list provides important information regarding 
specific programs:
lProgram 00: DKAdmin/DKBackup does not upgrade the DK security codes in Program 
00-1 and 00-2. If required, change the code using the DKAdmin Program Administration 
Section option or manually from the programming telephone.
lProgram 03: On new or upgraded installations,...

––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––View/Print Data
11 5Backup Menu (DKBackup)
one at a time (for example: PRGALL), instead of tagging all files to download. If 
a Release 1 processor fails during the downloading process, retry the process or 
change the original Release 1 processor ROMs to NANP Release 1 upgrade 
ROMs and then download.
View/Print Data
äTo access the option
1. From the File Menu, select a customer.
2. From the Administration 
Menu, type v. The...

View/Print Data––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
116DKAdmin/DKBackup 

11 7Options Menu
Options Menu8
This chapter gives you step-by-step instructions on using the options available on the Options 
Menu. They are:
©System Installation
©Company General Information (DKAdmin only)
©Screen Type/Color Installation
©Printer Type Selection
©System Miscellaneous Variables
©User Password Level Setup
©Communications Setup
©System Utilities
©ReIndex Files
System Installation
These features enable you to change system parameters such as screen colors, printer, 
miscellaneous system...

System Installation–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
118DKAdmin/DKBackup
Screen Type/Color Installation
äTo change your monitor or color setups (not available to password level 2)
1. From the Main Menu, type o. The 
System Installation Submenu 
displays (shown right). Press 
Enter.
2. Type s and a pop-up screen 
displays (shown right), enabling 
you to set monitor and screen 
specifications. 
NotePress the spacebar to toggle between available options.
Screen...

–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––System Installation
11 9Options Menu
äTo change the color of an item
1. From the pop-up dialog box, highlight the Yes for the Change Colors option and press 
Enter. The Color Selection screen displays.
The Color Selection 
screen (shown right) 
consists of an item 
selection menu, a set 
of item color bars, and 
a sample screen 
display showing the 
result of your color 
selection. All three 
components work 
together to show an...

System Installation–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
120DKAdmin/DKBackup
äTo select printer
1. Type p. The Printout 
Destination Selection 
Matrix screen displays 
(shown right).
2. Highlight the 
appropriate printer 
destination and press 
the spacebar. The 
highlighter moves to 
the Printer field.
3. Press F2. The 
Available Printer 
Drivers dialog box 
displays.
4. Scroll the printer list using the up/down arrow keys, or type the first letter of your printer...