Toshiba Estudio 230 Manual

June 2004 © TOSHIBA TECe-STUDIO200L/202L/230/232/280/282 FIRMWARE UPDATING
6 - 77
6
Updating the system ROM starts subsequently. 
The device check starts. 
When the device check completes, copying the  
data to the ROM of the equipment starts. 
When copying the data completes, copying the  
other data are implemented repeatedly. 

e-STUDIO200L/202L/230/232/280/282 FIRMWARE UPDATINGJune 2004 © TOSHIBA TEC
6 - 78
When copying all the data complete, the update  
completes with the following screen.
* If the USB storage device is not recognized proper ly, the following message is displayed and the 
update is interrupted. 

June 2004 © TOSHIBA TECe-STUDIO200L/202L/230/232/280/282 FIRMWARE UPDATING
6 - 79
6
* If an error occurs, the following error message is  displayed and the update is interrupted. 

e-STUDIO200L/202L/230/232/280/282 FIRMWARE UPDATINGJune 2004 © TOSHIBA TEC
6 - 80
6.5 Firmware Updating with USB Storage Device 
(e-STUDIO202L/232/282)
In this equipment, it is feasible to update the fir mware by connecting the USB storage device on which  
the firmware data is written to the USB connector m ounted on the system control PC board and turning 
ON the power. 
The type of firmware to be updated can be selected  on the LCD screen in this method. This allows to 
update only the necessary...

June 2004 © TOSHIBA TECe-STUDIO200L/202L/230/232/280/282 FIRMWARE UPDATING
6 - 81
6
Important:   Only the USB storage device which meets the follow ing conditions should be used for updat-
ing. Be careful since updating with any device othe r than the above is never guaranteed.
- A combination USB storage device with a flash memo ry (to be connected directly to the 
USB port) and its capacity is between 64 MB to 512 M B (or 1 GB).
- Operation of the USB storage device used for updat ing has been...

e-STUDIO200L/202L/230/232/280/282 FIRMWARE UPDATINGJune 2004 © TOSHIBA TEC
6 - 82
[A] Update procedure
Important:   The file system of USB storage device should be fo rmatted in FAT format. Be careful since 
the devices formatted in FAT32 or NTFS format will  not be operated. The file system can be 
confirmed on the properties in applications such as  Explorer of Windows.
 Do not turn OFF the power during the update. The d ata could be damaged and not to be 
operated properly.
(1) Connect the USB...

June 2004 © TOSHIBA TECe-STUDIO200L/202L/230/232/280/282 FIRMWARE UPDATING
6 - 83
6
(4) Turn ON the power while [4] button and [9] butto n are pressed simultaneously. 
The screen for selecting the items to be updated is  displayed after 3 minutes. “*” is displayed 
next to the items to be updated. (All items other t han 0. OS Update are selected in the default 
settings.)
Note: Note:  The display of items on this screen varies dependin g on the types of data written on the USB 
storage device. Each item...

e-STUDIO200L/202L/230/232/280/282 FIRMWARE UPDATINGJune 2004 © TOSHIBA TEC
6 - 84
If the USB storage device is not recognized properl y, the following message is displayed. In this 
case, disconnect the USB storage device and connect  it again within 3 minutes, or turn OFF the 
power of the equipment and connect the device prope rly. Then repeat the procedure from (4).
If the updating data file does not exist or a data  file for other model is stored, the following mes-
sage is displayed. In this case,...

June 2004 © TOSHIBA TECe-STUDIO200L/202L/230/232/280/282 FIRMWARE UPDATING
6 - 85
6
(5) Select the item with the digital keys. “*” is displayed next to the selected item. Display  or delete the “*” by pressing the number of the 
item. All items are selected in the default setting s.
 Select all items to update the firmware of the equ ipment in a batch.
 Select items as follows to update individually. 
 
Select “0. OS Update” only. 
 
Select “1. HDD Update” only. 
 
Select “2. UI Data Update” and “3....

e-STUDIO200L/202L/230/232/280/282 FIRMWARE UPDATINGJune 2004 © TOSHIBA TEC
6 - 86
(6) Press the [START] button. Updating starts and the processing status is display ed on the LCD screen.
(7) “Update Completed.” is displayed at the bottom o f the LCD screen after the updating is com-
pleted properly.
Status display during update Status display when upd ate is completed 
OS Update  ....... OS Update  ....... Completed 
HD Data Update  ....... HD Data Update  ....... Complet ed
UI Data Update  ....... UI...