Toshiba Estudio 230 Manual

June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 DATA CLONING with USB STORAGE DEVICE (e-STUDIO202L/232/282)
9 - 3
9

(5) Turn the power ON while pressing the [5] and [9]  button simultaneously.
The screen to select the backup/restore items is di splayed.
 Fig. 9-2
(6) Select the items to be performed with the digita l keys.
 In case of backup, select one of the following ite ms.

Select 1: User Data Back Up.
 Select 3: Setting Back Up.
 Select 5: SRAM Data Back Up.
Note: Note: After the item...

e-STUDIO200L/202L/230/232/280/282 DATA CLONING with USB STORAGE DEVICE (e-STUDIO202L/232/282) June 2004  © TOSHIBA TEC
9 - 4
(8) Select the items to be backed up with the digita l keys.
The mark * is shown on the selected item. The mar k * can be deleted or added each time the 
corresponding digital key is pressed. 
 To back up the data in a batch, select 4, 5 or  6. (Selecting 4 performs 1, 2 and 3 
together.)
 To back up the data individually, select the follo wing items.

Select 1: Address Book...

June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 DATA CLONING with USB STORAGE DEVICE (e-STUDIO202L/232/282)
9 - 5
9
(The following screens are given as an example of w hen all items are backed up.)
(9) Press the [Start] button. The backup starts and the backing up status is disp layed on the LCD screen.
 Fig. 9-5
(10) Back Up Completed is displayed on the LCD scr een when the backup has been properly com-
pleted.
 Fig. 9-6
(11) Turn the power OFF and remove the USB storage d evice.
05/11 

e-STUDIO200L/202L/230/232/280/282 DATA CLONING with USB STORAGE DEVICE (e-STUDIO202L/232/282) June 2004  © TOSHIBA TEC
9 - 6

(12) Connect the USB storage device to the USB conne ctor (host) on the SYS board.
(13) Turn the power ON while pressing the [5] and [9 ] button simultaneously.
The screen to select the backup/restore items is di splayed.
 Fig. 9-7
Note: Note: 
After the item is selected with the digital keys, d isplaying the next menu may take a long time.
(14) Press the [3] button. The screen to...

June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 DATA CLONING with USB STORAGE DEVICE (e-STUDIO202L/232/282)
9 - 7
9
(15) Select the items to be backed up with the digit al keys.
The mark * is shown on the selected item. The mar k * can be deleted or added each time the 
corresponding digital key is pressed. 
 To back up the data individually, select the follo wing items.

Select 1: Network/Print Service only.

Select 2: SaveAsFile/Email/InternetFAX only.
 Select 3: Notification only.

Select...

e-STUDIO200L/202L/230/232/280/282 DATA CLONING with USB STORAGE DEVICE (e-STUDIO202L/232/282) June 2004  © TOSHIBA TEC
9 - 8
(17) Back Up Completed is displayed on the LCD scr een when the backup has been properly com-
pleted.
 Fig. 9-10
(18) Turn the power OFF and remove the USB storage d evice.
 (19) Connect the USB storage device to the USB conne ctor (host) on the SYS board. 
(20) Turn the power ON while pressing the [5] and [9 ] button simultaneously.
The screen to select the backup/restore items is...

June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 DATA CLONING with USB STORAGE DEVICE (e-STUDIO202L/232/282)
9 - 9
9
(21) Press the [5] button. The screen to select the SRAM data backup item is d isplayed. In this screen, the item to be 
backed up is shown after the mark *. (The item is  not selected in the screen by default.)
 Fig. 9-12
(22) Select the item to be backed up with the digital  keys.
The mark * is shown on the selected item. The mar k * can be deleted or added each time the...

e-STUDIO200L/202L/230/232/280/282 DATA CLONING with USB STORAGE DEVICE (e-STUDIO202L/232/282) June 2004  © TOSHIBA TEC
9 - 10
(24) Back Up Completed is displayed on the LCD scr een when the backup has been properly com-
pleted.
 Fig. 9-14
(25) Turn the power OFF and remove the USB storage d evice.
05/11 

June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 DATA CLONING with USB STORAGE DEVICE (e-STUDIO202L/232/282)
9 - 11
9
[B] Data cloning procedure (Restore)
Important:   The file system for the USB storage device should  be in the FAT format. Note that any device 
formatted in FAT32 or NTFS will not be operated. It s file system can be confirmed by opening 
the properties of the device from Windows Explorer.
 Never turn the power of the equipment OFF during d ata cloning, or the data could be...

e-STUDIO200L/202L/230/232/280/282 DATA CLONING with USB STORAGE DEVICE (e-STUDIO202L/232/282) June 2004  © TOSHIBA TEC
9 - 12

(3) Turn the power ON while pressing the [5] and [9]  button simultaneously.
The screen to select the backup/restore items is di splayed.
 Fig. 9-16
(4) Select the items to be performed with the digita l keys.
 In case of restore, select the following items. 
Select 2: User Data Restore.
 Select 4: Setting Restore.
 Select 6: SRAM Data Restore.
Note: Note: After the item is...