Toshiba Estudio 230 Manual

June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 DATA CLONING with USB STORAGE DEVICE (e-STUDIO202L/232/282)
9 - 13
9
(6) Select the items to be restored with the digital  keys.
The mark * is shown on the selected item. The mar k * can be deleted or added each time the 
corresponding digital key is pressed. 
 To restore the data in a batch, select 4, 5 or  6. (Selecting 4 performs 1, 2 and 3 
together.)
 To restore the data individually, select the follo wing items.
Be sure to select the same...

e-STUDIO200L/202L/230/232/280/282 DATA CLONING with USB STORAGE DEVICE (e-STUDIO202L/232/282) June 2004  © TOSHIBA TEC
9 - 14
(The following screens are given as an example of w hen all items are restored.)
(7) Press the [Start] button. The restore starts and the restoring status is displ ayed on the LCD screen.
 Fig. 9-19
(8) Restore Completed is displayed on the LCD scre en when the restore has been properly com-
pleted.
 Fig. 9-20
(9) Turn the power OFF and remove the USB storage de vice.
(10) Clear...

June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 DATA CLONING with USB STORAGE DEVICE (e-STUDIO202L/232/282)
9 - 15
9

(11) Connect the USB storage device to the USB conne ctor (host) on the SYS board.
(12) Turn the power ON while pressing the [5] and [9 ] button simultaneously.
The screen to select the backup/restore items is di splayed.
 Fig. 9-21
Note: Note: 
After the item is selected with the digital keys, d isplaying the next menu may take a long time.
(13) Press the [4] button. The screen...

e-STUDIO200L/202L/230/232/280/282 DATA CLONING with USB STORAGE DEVICE (e-STUDIO202L/232/282) June 2004  © TOSHIBA TEC
9 - 16
(14) Select the items to be restored with the digita l keys.
The mark * is shown on the selected item. The mar k * can be deleted or added each time the 
corresponding digital key is pressed. 
 To restore the data individually, select the follo wing items.

Select 1: Network/Print Service only.

Select 2: SaveAsFile/Email/InternetFAX only.
 Select 3: Notification only.

Select 4:...

June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 DATA CLONING with USB STORAGE DEVICE (e-STUDIO202L/232/282)
9 - 17
9
(16) Restore Completed is displayed on the LCD scr een when the restore has been properly com-
pleted.
 Fig. 9-24
(17) Turn the power OFF and remove the USB storage d evice.
 (18) Connect the USB storage device to the USB conne ctor (host) on the SYS board. 
(19) Turn the power ON while pressing the [5] and [9 ] button simultaneously.
The screen to select the backup/restore items...

e-STUDIO200L/202L/230/232/280/282 DATA CLONING with USB STORAGE DEVICE (e-STUDIO202L/232/282) June 2004  © TOSHIBA TEC
9 - 18
(20) Press the [6] button. The screen to select the SRAM data restore item is  displayed. In this screen, the item to be 
restored is shown after the mark *. (The item is n ot selected in the screen by default.)
 Fig. 9-26
(21) Select the item to be restored with the digital keys.
The mark * is shown on the selected item. The mar k * can be deleted or added each time the...

June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 DATA CLONING with USB STORAGE DEVICE (e-STUDIO202L/232/282)
9 - 19
9
(23) Restore Completed is displayed on the LCD scr een when the restore has been properly com-
pleted.
 Fig. 9-28
(24) Turn the power OFF and remove the USB storage d evice.
05/11 

e-STUDIO200L/202L/230/232/280/282 DATA CLONING with USB STORAGE DEVICE (e-STUDIO202L/232/282) June 2004  © TOSHIBA TEC
9 - 20
[C] Confirmation of the error 
Back Up ERROR X (X: Error number) is displayed at  the top of the LCD screen when the data have 
not been properly backed up / restored. In this cas e, turn the power OFF and then check the following 
items. After confirming and solving the problem, ba ck up / restore the data again from the beginning.
 Does the USB storage device meet the...

June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 DATA CLONING with USB STORAGE DEVICE (e-STUDIO202L/232/282)
9 - 21
9
[D] Backup file 
Backed up data files are encrypted. 
 
The folder user_data is created in the root direc tory and the following files are stored in it.
 
The folder setting_data is created in the root di rectory and the following files are stored in it.

The folder sram_data is created in the root direc tory and the following file is stored in it.
* In addition to the backed up...

e-STUDIO200L/202L/230/232/280/282 DATA CLONING with USB STORAGE DEVICE (e-STUDIO202L/232/282) June 2004  © TOSHIBA TEC
9 - 22