Toshiba E Studio 207 User Manual

							TCP/IP Configuration    39
15Press the [CANCEL] button once or press the [FUNCTION CLEAR] 
button to return the screen to the “user function mode” main 
screen.
14Press   or   to select COM-
PLETE, and then press the 
[ENTER] button.
The initialization starts and “Initializing” 
appears. When it is completed, 
“Operation Completed” appears and the 
screen returns to the one shown in step 
3.
NETWORK
01.COMPLETE
02.ETHERNET
03.TCP/IP
Downloaded From ManualsPrinter.com Manuals 
						

							5 CONFIGURING NETWORKS (EQUIPMENT)
40    IPX/SPX Configuration
IPX/SPX Configuration
You can configure IPX/SPX protocol. The IPX/SPX protocol is configured usually to communi-
cate with a NetWare file server.
1Press the [USER FUNCTIONS] 
button when the ready screen 
is displayed.
The “user functions mode” main screen 
appears.
2Press   or   to select INI-
TIAL SETUP, and then press 
the [ENTER] button.
3Press   or   to select NET-
WORK, and then press the 
[ENTER] button.
4Press   or   to select IPX/
SPX, and then press the 
[ENTER] button.
5Press   or   to select IPX/
SPX, and then press the 
[ENTER] button.
6Press   or   to select 
ENABLE, and then press the 
[ENTER] button.
The screen returns to the one shown in 
step 5.
7Press   or   to select 
FRAME TYPE, and then press 
the [ENTER] button.
USER FUNCTIONS00001216
01.DEFAULT SETTINGS
02.LISTS
03.INITIAL SETUP
INITIAL SETUP
03.DRAWER SET POP-UP
04.TERMINAL ID
05.NETWORK
NETWORK
04.IPX/SPX
05.APPLE TALK
06.HTTP
IPX/SPX
01.IPX/SPX
02.FRAME TYPE
IPX/SPX
1.ENABLE
2.DISABLE
IPX/SPX
01.IPX/SPX
02.FRAME TYPE
Downloaded From ManualsPrinter.com Manuals 
						

							IPX/SPX Configuration    41
9Press the [ENTER] button.
The screen returns to the one shown in step 7.
12Press the [CANCEL] button once or press the [FUNCTION CLEAR] 
button to return the screen to the “user function mode” main 
screen.
8Press   or   to select the 
desired frame type.
AUTO SENSE:   Detects the most appropriate frame type automatically.
IEEE802.2:   Selects a frame type compatible with IEEE802.2.
IEEE802.3:   Selects a frame type compatible with IEEE802.3.
ETHERNET II:   Selects a frame type compatible with Ethernet II. 
IEEE802.3 SNAP:   Selects a frame type compatible with IEEE802.3 SNAP.
If you are not sure of the most appropriate frame type, select AUTO SENSE.
10Press the [CANCEL] button 
once to return the screen to 
the NETWORK menu screen.
If you press the [CANCEL] button more than twice and exit the NETWORK menu, the 
NIC initialization operation in the next step becomes ineffective. In this case, repeat the 
procedure from step 1.
11Press   or   to select COM-
PLETE, and then press the 
[ENTER] button.
The initialization starts and “Initializing” 
appears. When it is completed, 
“Operation Completed” appears and the 
screen returns to the one shown in step 
3.
FRAME TYPE
1.AUTO SENCE
2.
IEEE802.2
3.IEEE802.3
FRAME TYPE
3.
IEEE802.3
4.ETHERNET II
5.IEEE802.3 SNAP
NETWORK
04.IPX/SPX
05.APPLE TALK
06.HTTP
NETWORK
01.COMPLETE
02.ETHERNET
03.TCP/IP
Downloaded From ManualsPrinter.com Manuals 
						

							5 CONFIGURING NETWORKS (EQUIPMENT)
42    AppleTalk Configuration
AppleTalk Configuration
AppleTalk protocol must be enabled when AppleTalk printing from Macintosh computers needs 
to be enabled.
Set the device name of this equipment and AppleTalk zone using TopAccess as required. 
See the following page:
	 P.89 “Setting up the AppleTalk”
1Press the [USER FUNCTIONS] 
button when the ready screen 
is displayed.
The “user functions mode” main screen 
appears.
2Press   or   to select INI-
TIAL SETUP, and then press 
the [ENTER] button.
3Press   or   to select NET-
WORK, and then press the 
[ENTER] button.
4Press   or   to select 
APPLETALK, and then press 
the [ENTER] button.
5Press   or   to select 
APPLETALK, and then press 
the [ENTER] button.
6Press   or   to select 
ENABLE for enabling Apple-
Talk, or select DISABLE for 
disabling it. Then press the 
ENTER button.
The screen returns to the one shown in 
step 5.
USER FUNCTIONS00001216
01.DEFAULT SETTINGS
02.LISTS
03.INITIAL SETUP
INITIAL SETUP
03.DRAWER SET POP-UP
04.TERMINAL ID
05.NETWORK
NETWORK
04.IPX/SPX
05.APPLE TALK
06.HTTP
APPLE TALK
01.APPLE TALK
APPLE TALK
1.ENABLE
2.DISABLE
Downloaded From ManualsPrinter.com Manuals 
						

							AppleTalk Configuration    43
9Press the [CANCEL] button once or press the [FUNCTION CLEAR] 
button to return the screen to the “user function mode” main 
screen.
7Press the [CANCEL] button 
once to return the screen to 
the NETWORK menu screen.
If you press the [CANCEL] button more than twice and exit the NETWORK menu, the 
NIC initialization operation in the next step becomes ineffective. In this case, repeat the 
procedure from step 1.
8Press   or   to select COM-
PLETE, and then press the 
[ENTER] button.
The initialization starts and “Initializing” 
appears. When it is completed, 
“Operation Completed” appears and the 
screen returns to the one shown in step 
3.
NETWORK
04.IPX/SPX
05.APPLE TALK
06.HTTP
NETWORK
01.COMPLETE
02.ETHERNET
03.TCP/IP
Downloaded From ManualsPrinter.com Manuals 
						

							5 CONFIGURING NETWORKS (EQUIPMENT)
44    HTTP Configuration
HTTP Configuration
To use a web-based utility TopAccess, HTTP network server service must be enabled. This ser-
vice must be enabled also for IPP printing.
1Press the [USER FUNCTIONS] 
button when the ready screen 
is displayed.
The “user functions mode” main screen 
appears.
2Press   or   to select INI-
TIAL SETUP, and then press 
the [ENTER] button.
3Press   or   to select NET-
WORK, and then press the 
[ENTER] button.
4Press   or   to select HTTP, 
and then press the [ENTER] 
button.
5Press   or   to select HTTP 
SERVER, and then press the 
[ENTER] button.
6Press   or   to select 
ENABLE for enabling HTTP 
network server, or select DIS-
ABLE for disabling it. Then 
press the [ENTER] button.
The screen returns to the one shown in 
step 5.
7Press   or   to select PRI-
MARY PORT NUMBER, and 
then press the [ENTER] but-
ton.
USER FUNCTIONS00001216
01.DEFAULT SETTINGS
02.LISTS
03.INITIAL SETUP
INITIAL SETUP
03.DRAWER SET POP-UP
04.TERMINAL ID
05.NETWORK
NETWORK
04.IPX/SPX
05.APPLE TALK
06.HTTP
HTTP
01.
HTTP SERVER
02.PRIMARY PORT NUMBER
03.SECONDARY PORT NUMBER
HTTP SERVER
1.ENABLE
2.DISABLE
HTTP
01.
HTTP SERVER
02.PRIMARY PORT NUMBER
03.SECONDARY PORT NUMBER
Downloaded From ManualsPrinter.com Manuals 
						

							HTTP Configuration    45
13Press the [CANCEL] button once or press the [FUNCTION CLEAR] 
button to return the screen to the “user function mode” main 
screen.
8Key in the port number (nor-
mally “80”) to access HTTP, 
and then press the [ENTER] 
button.
The screen returns to the one shown in 
step 7.
Port number “80” is set by default. If you want to change it, press the [Clear/Stop] button 
and key in the desired port number.
9Press   or   to select SEC-
ONDARY PORT NUMBER, and 
then press the [ENTER] but-
ton.
10Key in the port number (nor-
mally “8080”) to access 
TopAccess, and then press the 
[ENTER] button.
The screen returns to the one shown in 
step 9.
Port number “8080” is set by default. If you want to change it, press the [Clear/Stop] but-
ton and key in the desired port number.
11Press the [CANCEL] button 
once to return the screen to 
the NETWORK menu screen.
If you press the [CANCEL] button more than twice and exit the NETWORK menu, the 
NIC initialization operation in the next step becomes ineffective. In this case, repeat the 
procedure from step 1.
12Press   or   to select COM-
PLETE, and then press the 
[ENTER] button.
The initialization starts and “Initializing” 
appears. When it is completed, 
“Operation Completed” appears and the 
screen returns to the one shown in step 
3.
PRIMARY PORT NUMBER
ENTER THE PORT NUMBER:
HTTP
01.
HTTP SERVER
02.PRIMARY PORT NUMBER
03.SECONDARY PORT NUMBER
SECONDARY PORT NUMBER
ENTER THE PORT NUMBER:
NETWORK
04.IPX/SPX
05.APPLE TALK
06.HTTP
NETWORK
01.COMPLETE
02.ETHERNET
03.TCP/IP
Downloaded From ManualsPrinter.com Manuals 
						

							Downloaded From ManualsPrinter.com Manuals 
						

							6.TopAccess OVERVIEW
This chapter describes the overview of TopAccess and how to access TopAccess.
TopAccess Overview ..............................................................................................48
End user mode .................................................................................................................................. 48
Administrator mode ........................................................................................................................... 49
Accessing TopAccess from Your Computer ........................................................50
Accessing TopAccess ....................................................................................................................... 50
TopAccess screen structure .............................................................................................................. 53
Downloaded From ManualsPrinter.com Manuals 
						

							6 TopAccess OVERVIEW
48    TopAccess Overview
TopAccess Overview
TopAccess has two access levels: the end user level and the administrator level. The adminis-
trator can configure all settings available and can perform maintenance operations.
yFor detailed explanation on TopAccess, see the following page: 
	 P.14 “Use environments of TopAccess”
yDisplay and setting items for Fax are available only when the Fax Kit (optional) is installed in 
this equipment.
When the setting or operation given in this manual is performed, do not turn the power of the 
equipment OFF until the TopAccess screen is automatically updated.
End user mode
The following settings and management are available in the end user mode: 
yChecking device status (Device tab page)
On the Device tab page, you can view the various types of device information of this equip-
ment, messages and alerts, current paper size and remaining status in each drawer, and 
option installation status.
	 P.55 “TopAccess DEVICE TAB PAGE”
yManaging address book (Registration tab page)
On the Registration tab page, you can add or edit destinations (contact names) of the 
address book.
	 P.59 “TopAccess REGISTRATION TAB PAGE”
yManaging counters (Counter tab page)
On the Counter tab page, you can view the current values of the total counters. 
	 P.77 “TopAccess COUNTER TAB PAGE”
Downloaded From ManualsPrinter.com Manuals