Toshiba E Studio 207 User Manual

							Basic Operations on Each Screen    19
To select each menu
You can select the desired menu or item in the menu selection screen.
The menus displayed in the screen differ depending on which options are installed. Some 
menus displayed in the menu selection screen shown in this manual may not be displayed in the 
actual screen, if the corresponding option is not installed. Button Function
 / Press these buttons to select menus or items. The cursor moves to the menu 
or item selected. The selected menu or item is highlighted.
When you press  , the cursor scrolls up. When you press  , it scrolls 
down.
[ENTER] Press this button to execute the selected menu or item.
[CANCEL] Press this button to cancel the selected operation. The screen returns to the 
previous one.
(If you press this several times, the screen returns to the main screen for the 
current mode.)
[CANCEL] button
[ENTER] button/    buttons
Downloaded From ManualsPrinter.com Manuals 
						

							2 BASIC OPERATIONS ON SCREENS (EQUIPMENT)
20    Basic Operations on Each Screen
Example of menu selection
The menu selection procedure to cancel a print job in the “printer mode” main screen is shown 
below.
*1 Each menu in this equipment has a serial number. When you key in the first 1 or 2 digits of 
the serial number, you can immediately select this menu. (In other words, this procedure 
substitutes for the entry by pressing   /   and the [ENTER] button.) With this function, 
you can select a menu located at the bottom of the hierarchical menu-tree structure by enter-
ing a series of numbers (e.g. “03” “03” “02”).
PRINTER MODE
1.CANCEL JOB
2.PCL FONT LIST
3.PS FONT LIST
CANCEL ?
1.YES
2.NO
[ENTER] button or a digital key [1]*1
[ENTER] button or a digital key [1]*1The selected menu is 
executed and the 
screen returns to the 
previous one.[CANCEL] button
When you press       , the cursor 
scrolls up.
When you press       , the cursor 
scrolls down.
The selected menu is canceled and the screen returns 
to the previous one.
Downloaded From ManualsPrinter.com Manuals 
						

							Basic Operations on Each Screen    21
To key in digits
You can enter digits using the digital keys.
Button /Digital key Function
Digital Keys Press these keys to enter digits when the digit entry screen is displayed.
[ENTER] Press this button to determine the digits keyed in.
 / Press these buttons to move the cursor to the right or left.
When you press  , the cursor moves to the left. When you press  , 
it moves to the right.
When you want to correct a digit already keyed in, move the cursor to the 
digit and then key in a new digit. The digit is replaced with a new one.
[CLEAR/STOP] Digits keyed in are all cleared.
[ENTER] button
Digital keys
[CLEAR/STOP] button/    buttons
Downloaded From ManualsPrinter.com Manuals 
						

							Downloaded From ManualsPrinter.com Manuals 
						

							3.CANCELING PRINT JOBS AND 
PRINTING FONT LISTS (EQUIPMENT)
This chapter describes how to cancel a print job in process and how to print font lists, using the control panel 
of this equipment.
To Cancel Print Jobs ..............................................................................................24
To Print PCL/PS Font List ......................................................................................25
PCL font list / PS font list................................................................................................................... 25
Downloaded From ManualsPrinter.com Manuals 
						

							3 CANCELING PRINT JOBS AND PRINTING FONT 
LISTS (EQUIPMENT)
24    To Cancel Print Jobs
To Cancel Print Jobs
You can cancel a print job in process using the [PRINTER] button. Canceling print jobs is 
required usually in the following cases: 
yA print job in process needs to be discarded
yPaper has run out during printing and you want to discard the rest of the job The message 
screen shown below appears when paper has run out.
Canceling print jobs is possible only when this equipment is actually printing a job. If you attempt 
to cancel a print job when this equipment is not doing so, “Not allowed now” appears in the 
screen.
1Press the [PRINTER] button 
when the ready screen is dis-
played.
The “printer mode” main screen 
appears.
2Press   or   to select CAN-
CEL JOB, and then press the 
[ENTER] button.
3Press   or   to select YES, 
and then press the [ENTER] 
button.
The print job is canceled and “Operation 
Completed” appears. The screen returns 
to the “printer mode” main screen shown 
in step 2.
DRAWER1 empty
Open DRAWER1
Load paper
Close DRAWER1
PRINTER MODE
1.CANCEL JOB
2.PCL FONT LIST
3.PS FONT LIST
CANCEL ?
1.YES
2.NO
Downloaded From ManualsPrinter.com Manuals 
						

							To Print PCL/PS Font List    25
To Print PCL/PS Font List
You can print the following font lists using the [PRINTER] button:
yPCL font list
yPS font list
For each font list printed, see the following page:
	 P.142 “List Print Format”
List printing is not possible when this equipment is actually printing a job. In this case, “Not 
allowed now” appears. Attempt list printing again after the completion of the print job.
PCL font list / PS font list
You can print lists for the internal PCL font and PS font to be used for printing. 
1Press the [PRINTER] button 
when the ready screen is dis-
played.
The “printer mode” main screen 
appears.
2Press   or   to select PCL 
FONT LIST or PS FONT LIST, 
and then press the [ENTER] 
button.
“Printing accepted” appears and the 
selected internal font list is printed out. 
The screen returns to the “printer mode” 
main screen shown in step 2. 
PRINTER MODE
1.CANCEL JOB
2.PCL FONT LIST
3.PS FONT LIST
PRINTER MODE
1.CANCEL JOB
2.PCL FONT LIST
3.PS FONT LIST
Downloaded From ManualsPrinter.com Manuals 
						

							Downloaded From ManualsPrinter.com Manuals 
						

							4.PRINTING LISTS (EQUIPMENT)
This chapter describes how to print printer-related lists from the control panel of this equipment.
To Print Lists ...........................................................................................................28
Configuration page ............................................................................................................................ 28
NIC status page ................................................................................................................................ 29
Downloaded From ManualsPrinter.com Manuals 
						

							4 PRINTING LISTS (EQUIPMENT)
28    To Print Lists
To Print Lists
You can print the printer-related lists shown below using the [USER FUNCTIONS] button.
yConfiguration page
yNIC status page
yFor each list mentioned above, see the following page:
	 P.142 “List Print Format”
yYou can see the printer-related user settings by printing the Function List. See the Opera-
tor’s Manual for Copying Functions.
yYou can see the printer-related menu list by printing the Menu List. See the Operator’s Man-
ual for Copying Functions.
List printing is not possible when this equipment is actually printing a job. In this case, “Not 
allowed now” appears. Attempt list printing again after the completion of the print job.
Configuration page
You can print out the setting status of the Network Printer Kit (optional).
1Press the [USER FUNCTIONS] 
button.
The “user functions mode” main screen 
appears.
2Press   or   to select LISTS, 
and then press the [ENTER] 
button.
3Press   or   to select CON-
FIGURATION PAGE, and then 
press the [ENTER] button.
“Printing accepted” appears and the 
configuration page is printed out.
USER FUNCTIONS1216
01.DEFAULT SETTINGS
02.LISTS
03.INITIAL SETUP
LISTS
4.ITU MAILBOX
5.CONFIGURATION PAGE
6.NIC STATUS PAGE
Downloaded From ManualsPrinter.com Manuals