TiE Onyx 2, 3, 4, 5 Service And Programming Manual

H- SYSTEM STATUS REPORTS
HA- EXTENSION-TO-PORT CONVERSION
Description
Sote:
Related
Programming
Feature Reference
Instructions
Step  
Step 1 l
Step  
Use this oprion to list the number of the extension or trunk assigned to each
port. The HA option displays in 
 number order.
To display the assignment in port number order. use the HB option. Use the
HH option to display estension!trunk-to-port conflicts.
Conditions
None
Default Value
Each extension/trunk is offset from its port number by 300. For...

H- SYSTEM STATUS REPORTS
HB- PORT-TO-EXTENSION CONVERSION
Description
Note:
Related
Programming
Feature Reference
Instructions
Step 1 No entry required.
Step 1 
Step  
Use this option to list the number of the extension or trunk assigned to each
port. The HB option displays in port number order.
To display the assignment in extension/trunk number order, use the HA
option. Use the HH option to display extension/trunk-to-port conflicts.
Conditions
None
 Value
Each extension/trunk is offset from its port...

H- SYSTEM STATUS REPORTS
HC- SYSTEM QUEUES
Description
Use this option to display the status of the system queue elements.  A  queue
element associates an  extension or trunk with call states (e.g.. Callback and
Camp-On). The HC option 
 the status of the queues at the moment
you request the report.
When 
 request the HC report. the system:
 Lists the total number of  queue elements
 Shows the type of queue
 Identifies those extensions or trunks currently in queue
System
Total queue elements
vs
63
12x36...

H- SYSTEM STATUS REPORTS
HC- SYSTEM QUEUES
Description
(Cont’d)
Related
Programming
Feature Reference
This report... . . .
CAMP ON Q
EXT # 350
07:308
ELEMENTS USED: 01
Extension 350 has extension 308 camped-on to it.
HOLD Q
EXT # 315
10: 397
ELEMENTS USED: 01Trunk 397 is on Transfer Hold (not key Hold) at
extension 3 
MESSAGE Q
EXT # 322
11:320
ELEMENTS USED: 01
Extension 320 has left a Message Waiting at
extension 322.
OUT Q
LIST # 01
12:396
ELEMENTS USED: 01
Trunk 396 is in use on an outside call.
RING...

H- SYSTEM STATUS REPORTS
HC- 
 QUEUES
Instructions
To enter data on the PRF:
 entry required.
To enter data at the programming terminal:
Type H. You see: 
Type C.  is a sample HC display.
 
FREE Q: 250
OUT Q
LIST 
 01
03:
ELEMENTS USED: 01
CAMP-ON Q
EXT  304
02: 3 0 5
ELEMENTS USED: 01
TOTAL ELEMENTS: 252
Issue 1-OSOFTWARE CONFIGURATION2-187 

H- SYSTEM STATUS REPORTS
HD- SYSTEM STATUS
Description
Use this option to display call activity at each trunk and extension and the
status of every 
 PCB in the system. The HD option displays the
system status at the moment 
 request the report. If there is no call activity
or line/trunk PCB problem to report. the report is blank. Be sure to set the
system time before using this report (refer to the Time and Data setting
feature).
When you request the HD report. the system lists the:
 Call activity at...

H- SYSTEM STATUS REPORTS
HD- SYSTEM STATUS
Description
 
EXPANSION CABINET SIM 0NOT INSTALLED
LINE1NOT INSTALLED
LINE2NOT INSTALLED
LINE3NOT INSTALLED
LINE4NOT INSTALLED
This part of the report shows that:
 The  PCB reports no failures and has software version 01
 The first  PCB reports no previous or current failures and has
software version 
 The second line/trunk PCB reports no previous failures but has 10 current
failures (see Note below). This PCB has software version 03.
 The fourth line/trunk PCB...

H- SYSTEM STATUS REPORTS
HD- SYSTEM STATUS
Description
Call States (Page 1 
ABANDONED . . Being abandoned
ABORT CAL. . Reorder
ACC 
  .   . Get Account Code (Stage 2)
ALERT. . 
 alerted
ALERT CH2. .Second channel is being alerted
ALRM DISP. .Displaying alarm data
AQR OP DG . . 
 Off-Premises CFWD telephone 
AQR SD DG . . . Acquire digit from Speed Dial bin
AQRSDLN.. .
 trunk from Speed Dial bin
B-IN ALRT . . Break-in alert tone
BEING HLD On Hold at another extension
BSY REACT. . . Reaction to busy
BUSY....

H- SYSTEM STATUS REPORTS
HD- SYSTEM STATUS
Description
(Cont’d)
Call States 
  of 
FLASHED . . .  a trunk
FLASHING . . Flashing a trunk
FORWARD, .. Test for Forwarding
 MODE. . . .Feature mode  key struck)
 .
GET BUFF. .
GET ROUTE.
GROUP CAL.
GRP RUNG, .
HEAR CRER .
HFTOCH2..
HK 
HOLD 
IDLE. . . . .
INCONF.. .
IN ORBIT. . .
 .Get Account Code (stage 1)
.  . Waiting for dial buffer
. Route call based on cost data
. Group call
. . .Being rung by group call
. . .Listening (hear) to carrier
. . Handsfree...

H- SYSTEM STATUS REPORTS
HD- SYSTEM STATUS
Description
Call States  3 of 
PG SQUARE OPR programming key system (keysets)
PG STA SD . Programming station Speed Dial
PG SYS SD . Programming 
 Speed Dial
PREP DEST. . 
 
PROG   a DSS key (Step 1)
PROG 
 ..  a DSS key (Step 2)
PROG MODE 
  key struck)
REORDER. . . Reorder
 Ringing other extension
RINGBACK. . . 
 being rung because of Callback request
RINGING . . . Being rung
RSRVD MDM . . Modem is reserved
RTRY SRCH . .. Search for free trunk
SET DATE . , . ,...