TiE Onyx 2, 3, 4, 5 Service And Programming Manual

L- LISTING SYSTEM AND EXTENSION DATA
LS- LISTING SYSTEM DATA
Description
Use this option to display the system data report. This report shows
 The installed SIM  and their software level (56x120 and 72x180
systems only)
 The installed line/trunk  and their software level (except in VS)
 The installed extensions, their names and their circuit types
 The installed trunks. their names and their circuit types
Following is a sample LS- Listing System Data report:
CARDS DEFINEDSW REVMAIN CABINET
SIM001...

L- LISTING SYSTEM AND EXTENSION DATA
LS- LISTING SYSTEM 
Instructions
To enter data on the PRF:
Step  No entry required
To enter data at the programming terminal:
Step  lType L. You see: 
Step 2 l S. The report displays.
2-222 SOFTWARE CONFIGURATION
issue 1-O 

 CANCEL ACCESS LEVEL
Description
Note:
Related
Programming
Feature Reference
Instructions
Step 1 
Step 1 
Issue 1-OUse this option to immediately reinstate password (access code) level 0. 
For
example, if you enter a level  or access code, the system enables the access
level for about 10 minutes. During this time. unauthorized modifications can
be made to your system’s programming. To protect your system’s
programmed options. use M- Cancel Access Level after making your entry.
Refer to the 
  Password...

M- CANCEL ACCESS LEVEL
 For  Sotes 
 
    

N- PROGRAMMING NAMES AND MESSAGES
ND- PRINTING THE DIRECTORY
Description
Sote:
Related
Programming
Feature Reference
Instructions
Issue 1-O
Step 1 l
Step  
Step 2 
Step 3 
Step  
Use this option to print an alphabetized directory of extension names. The
directory 
 prints names for installed extensions. The directory prints in
the following format:
 Line feeds
 Date and Time header
 Line feed
Directory contents  lines of text per page)
 Page feed
The directory does not include trunk names or Selectable...

N- PROGRAMMING NAMES AND 
NL- LISTING NAMES AND 
Description
Use this option to list:
 Extension and trunk names
 Selectable  
Following is a sample names and messages listing:
ExtensionsEXT  300 OPERATOR
EXT#301
EXT302
EXT#303
EXT # 304FRED
EXT # 305SALLY
TrunksEXT # 480SALES
EXT  481SERVICE 01
EXT # 482SERVICE 02
MessagesMSG # 600 OUT TO LUNCH
MSG # 601 ON VACATION
MSG # 602MEET IN ROOM
MSG # 603 CALL
Conditions
None
Default Value
None
Related
Programming
Feature Reference
Instructions
Step 1 l
Step 1...

N- PROGRAMMING NAMES AND MESSAGES
NP- PROGRAMMING NAMES AND MESSAGES
Description
Related
Programming
Feature Reference
Instructions
Step 1 l
Step 
Step 2 
Step 3 
Issue 1-OUse this option to assign names to extensions and trunks 
and to program
Selectable Display Messages. Use this option with the following 
Central Office Calls, Answering
Direct Inward Dialing
Direct Inward Line
Direct Inward System Access
Directory Dialing
Directory Dialing (ONYX IV)
Intercom
Private Lines
Selectable Display Messages...

N-  NAMES AND MESSAGES
NP-  NAMES AND 
 For  Notes 
Issue  

0- LABEL MAKER AND SELECTIVE HISTORY
OL- LABEL MAKER
Description
Related
Programming
Feature Reference
Instructions
Step  
Step  
Step 2 
Step 3 
Step  l
Step  
Step 6 
Step 7 l
Use this command to print site-specific data on kevset telephone labels. The
label maker prints out the KS assignments and 
 Hotline names and
DSS assignments. For best results. use the tractor feed label inserts 
83257). These inserts are identical to the labels supplied with the  and
work with tractor feed printers.
Before...

0- LABEL MAKER AND SELECTIVE HISTORY
 LABEL 
Instructions
(Cont’d)
Step  l
Step 9 
Step 10 l
Step 11 l
Step 12 l
When you see PRINT DSS ON 2ND LINE?:
  Y to have the  labels include the DSS extension number
assignments.
OR
 Type N to have the key labels exclude the DSS extension number
assignments.
When you see PRINT DSS NAMES?:
 Type Y to have the kev labels include the DSS names (if programmed)
instead of DSS extension numbers.
OR
 Type N to have the key labels print the DSS extension number...