TiE Onyx 2, 3, 4, 5 Service And Programming Manual

F- MISCELLANEOUS SYSTEM DATA
 RESET SYSTEM QUEUES
Related
Programming
l
l
l
P
P
l
P
P
P
l
P
Feature Reference
Instructions
Step 1 
Step 1 
Step 2 l
E- Extensions, EA- UCD Group Master Extension Number   the
master extensibn number to each group member and the master 
number.
Voice Mail Compatibility
E- Extensions, 
 Circuit Type  Each OPX and AS1 P/N 89748 Voice
Messaging System port should have circuit type 05. Each AS1 P/N 89749
Voice Messaging System port should have circuit type 5 1.
E- Extensions,...

F- MISCELLANEOUS SYSTEM DATA
 RESET TRUNK CIRCUITS AND LINE/TRUNK 
 RESET REMOTE KSU FAIL COUNTERS (VS ONLY);
Description
Related
Programming
Feature Reference
Instructions
Step  l
Step 1 l
Step 2 
In the large systems. this option is  RESET TRUNK CIRCUITS  LINE
TRUNK PCBS. 
Use this command to reset the fail counters for trunks and
Line/Trunk 
 The system shows the fail count as part of HD- System
Status  Display. Resetting the fail counters establishes a reference point to
which you can compare future...

F- MISCELLANEOUS SYSTEM DATA
 RESET  FLAG (TELEPHONE MESSAGE WAITING LAMPS)
Description
Related
Programming
Feature Reference
Instructions
Step 1 
Step 1 l
 2 l
Use this option to update the status of each extension’s Message Waiting
LED. This option only applies if the system is connected to an integrated
Voice Messaging System. Use this command once you complete installation
and  programmin g of the Voice Messaging System.
This option only applies to systems with an integrated Voice Messaging
System....

F- MISCELLANEOUS SYSTEM DATA
 RESET ALL  FEATURE KEYS
Description
Related
Programming
l
Feature Reference
Instructions
Step 1 l
Step 1 l
Step 2 l
Use this command to reset the system memory used for  feature keys
(programmed in KS- Programmable Keys for Keysets). You 
do this before  Centres feature keys. You could also do this
before redefining Centres feature keys system-wide. FC4 changes the key
definition to UNDEFINED for each 
 feature key on each 
Conditions
This option only applies to  feature...

F- MISCELLANEOUS SYSTEM DATA
FL- LCR CONFIGURATION
Description
Related
Programming
Feature Reference
Instructions
Step 1 
Step 1 l
If your system has LCR, use this option to show a description of 
configuration. Following is an example of an LCR Description. Your
description will be different than that shown below.
  ORDER NO. 
COMPILED
   .  : : :
Conditions
None
Default Value
None
Refer to the Least Cost Routing Feature
Refer to the Least Cost Routing Feature
To enter data on the PRF:
No entry...

F- MISCELLANEOUS SYSTEM 
FL- LCR CONFIGURATION
 For  Notes 
2-178  CONFIGURATIONIssue 1-O 

GA- ARS EDITOR
Description
Related
Programming
Feature 
Reference
Instructions
Step  
Step 1 
Issue 1-OUse the GA option to program the Automatic Route Selection routing options.
The GA option is explained in Appendix A. Automatic Route 
Conditions
This option only applies to systems with Automatic Route Selection.
Default Value
Refer to Appendix A.
Automatic Route Selection
E- Trunks. 
 Nest Trunk in Outbound Rotary  ARS requires outbound
trunk rotaries. This prompt determines the selection sequence for...

GL- LCR TESTING
Description
Related
Programming
l
l
l
Feature Reference
Use this option to run the Least Cost Routing test program. The GL option
lets you display 
 current LCR configuration and make changes to your
LCR database. 
 can also use this  to test your LCR 
Consult with your  ice technician before running this program.
This option  applies to systems with Least Cost Routing.
Default Value
None
Least Cost Routing
E- 
Trunks,  Trunk Service Number  Assign a Service Number to all
trunks used for...

GL- LCR TESTING
Instructions
Step I 
Step  
Issue 1-O
To enter data on the PRF:
No entry required
To enter data at the programming terminal:
Type GL. You see:
LCR TEST PROGRAM
E=MODIFY NEAREST NPA DETAIL TABLES (ROUTE #)
F=MODIFY 161 NPA TABLES (ROUTE #)
L=DATABASE ASCII DESCRIPTOR
M=CONFLICT,LEADING l,SEARCH DATA
N=DISPLAY 161 NPA TABLES NEAREST NPA DETAIL TABLESP=DDD COST RATING TABLES
 SELECTION TABLES LCR SELECTIONS TO  
Consult    technician for the specifics.
SOFTWARE CONFIGURATION 2-181 

GL- LCR 
 For