Starplus Triad Xts Installation Digital Key Telephone System Instructions Guide

Attendant Directory List Programming 3-11
Chapter 3 - Attendant Features and Operation
Operation
To view the directory list:
1. Dial the Directory List dial code [680] on the dial pad,
-or-
Press the flexible button programmed as a directory dialing button.
2. Press a button on the key pad, once, twice or three times, that represents the letter of the
alphabet to begin viewing the list of names (e.g., when 2 is first pressed, it produces
names starting with A. When 2 is pressed a second time, names that...

3-12 Attendant Disable Outgoing CO Line
Chapter 3 - Attendant Features and Operation
4. Hang up to complete the transfer.
Conditions
»If the desired party is an intercom station, that station is signaled according to their
intercom selector/H-T-P switch (SLT stations tone ring).
»If the desired party is associated to a speed dial bin, the system selects a CO line and dials
the number programmed into the speed dial bin. Call progress tones are then heard.
»If station is in Directory Dialing mode and a CO...

Attendant Setting Time and Date 3-13
Chapter 3 - Attendant Features and Operation
Programming Steps
1. Press the ATTN OVERRIDE flexible button(FLASH 05, Button #1).
2. Enter a valid number (0 or 1) that corresponds with the following entries:
[0] = Disabled
[1] = Enabled
3. Press HOLD to save the entry. A confirmation tone sounds.
DEFAULT…Attendant Override is disabled.
Operation
To call a station busy on a CO call:
Press the preprogrammed ATTN OVERRIDE button [601]. Three short tone bursts are
presented...

3-14 Attendant Station Assignment
Chapter 3 - Attendant Features and Operation
2. Choose display format by pressing the appropriate button in the flexible button field. The
time can be displayed in the standard 12-hour format or the 24-hour format.
3. Dial the time and date in the order shown below (2 digits for each entry, for a total of
10 digits):
Ye a r
Month
Day
Hour
Minute
4. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
When entering the time and date, use the...

Attendant Unavailable3-15
Chapter 3 - Attendant Features and Operation
Programming Steps
1. PressFLASHand dial[10]. The following message displays:
2. Enter a valid station number on the dial pad. Entering [#] three times removes that
attendant assignment.
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
DEFAULT…Station 100 is assigned as the first attendant.
Attendant Unavailable
Description
The Attendant Unavailable feature lets Attendant stations have a button that...

3-16 Attendant Voice Mail Alarm Clear
Chapter 3 - Attendant Features and Operation
»If all Attendants in the system are unavailable, no Attendants are available for
internal/external callers.
»Recalls are directed to all programmed available Attendants.
»If only one Attendant is programmed in the system, and that Attendant is unavailable,
users dialing zero hear an error tone.
Attendant Voice Mail Alarm Clear
Description
The Attendant display shows an alarm condition when the system detects that the...

DSS/BLF Console with Map3-17
Chapter 3 - Attendant Features and Operation
Any one of the five MAP configurations may be assigned to the DSS/BLF and any number of
maps may be assigned to one station. However, MAPs that have buttons assigned as CO lines
cannot be changed, buttons assigned as Stations can be changed by the user.
There are five pre-defined MAPs for the DSS/BLF console with default button programming.
Refer toFigure 3-2 on page 3-17throughFigure 3-6 on page 3-21.
MAP #1 --By default has the...

3-18DSS/BLF Console with Map
Chapter 3 - Attendant Features and Operation
MAP #2 --By default has the first 48 Stations, 100-147, appear in sequential order. All buttons
on Map #2 are flexible and can be changed by the station user. This map can be duplicated
on another DSS/DLS Console and assigned to the same station.
Figure 3-3: DSS Console Map #2 

DSS/BLF Console with Map3-19
Chapter 3 - Attendant Features and Operation
Map #3 --By default is to be used with Map #2 in that it has the remaining stations, 148-195,
to provide a full Station mapping. All of the buttons on Map #3 are flexible and can be
changed by the user. This map can be duplicated on another DSS/DLS Console and assigned
to the same station.
Figure 3-4: DSS Console Map #3 

3-20DSS/BLF Console with Map
Chapter 3 - Attendant Features and Operation
MAP #4 --By default, CO Lines 1-48 appear in sequential order.
Figure 3-5: DSS Console Map #4